- RS-stocknr.:
- 533-279
- Fabrikant:
- RS PRO
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
285 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 97,70
(excl. BTW)
€ 118,22
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 97,70 |
- RS-stocknr.:
- 533-279
- Fabrikant:
- RS PRO
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- SE
Productomschrijving
RS Pro Crimp Tool For 6.0 mm² to 0.75 mm² Insulated Terminals
The 533-279 is an Original line hand crimp tool for insulated terminals in the range from 6.0 mm² to 0.75 mm²/AWG 22 to AWG10. The tool is designed to provide consistent and reliable crimp connections on end splices/ferrules wires.
Also known as Red, Blue and Yellow terminals. See stock numbers 534-238, 534-597, 534-468 typically. Symmetrical oval crimps are produced for the insulation and conductor barrel, either right or left handed.
Also known as Red, Blue and Yellow terminals. See stock numbers 534-238, 534-597, 534-468 typically. Symmetrical oval crimps are produced for the insulation and conductor barrel, either right or left handed.
Features and Benefits
Versatile and easy to use for right hand or left hand users
Non-slip main handle and low friction moving handle ensue a comfortable hand grip
Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
Full cycle crimp mechanism to ensure consistent, reliable crimp
Ratchet release mechanism to clear mis-crimps and obstructions
Precision eccentric adjustment for consistent performance and ability to calibrate
Each tool has a unique serial number for traceability
Durable: life span exceeds 50000 cycles
High strength, through hardened alloy Swedish steel construction
Non-slip main handle and low friction moving handle ensue a comfortable hand grip
Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
Full cycle crimp mechanism to ensure consistent, reliable crimp
Ratchet release mechanism to clear mis-crimps and obstructions
Precision eccentric adjustment for consistent performance and ability to calibrate
Each tool has a unique serial number for traceability
Durable: life span exceeds 50000 cycles
High strength, through hardened alloy Swedish steel construction
How to maintain the product?
To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.
Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly
*Use a light mineral-free oil
Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.
Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly
*Use a light mineral-free oil
Typical applications
Maintenance & repair
How to use?
Open the tool. Insert terminal and wire in die nest from front. Close tool until ratchet release. Attention: To release ratchet mechanism, push the trigger forward when holding handles.
Note
Risk of electric shock. Do not use this tool on live wire.
Specificaties
Kenmerk | Waarde |
---|---|
Product Type | Crimp Tool |
Operation | Hand |
For Use With | Insulated Spade Connectors |
Wire Size mm² | 0,75 → 6mm² |
Ratcheting | Yes |
Overall Length | 225 mm |
- RS-stocknr.:
- 533-279
- Fabrikant:
- RS PRO