- RS-stocknr.:
- 186-3616
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 186-3616
- Fabrikant:
- RS PRO
Wetgeving en compliance
Productomschrijving
Silver Loaded Conductive Epoxy Adhesive
The silver loaded, conductive epoxy from RS PRO is a two-part thermosetting material with an epoxy resin adhesive base which contains silver flakes. This 2-element epoxy adhesive features high conductive benefits and is ideal for interconnecting and mechanical bonding components to circuits. Using Conductive Epoxy Adhesive can be a safer and more efficient alternative to traditional soldering. Silver-based conductive epoxies are much more oxidise resistant than tin or lid. Unlike tin or lid, they remain conductive even when oxidised. It eliminates the risk of serious conductive issues.
Features and Benefits:
Hard and wear resistant after proper curing
Compatible with a wide range of materials
Suitable for substrates that cannot be soldered
Superior durability, thermal, shock and chemical resistance
High electrical conductivity
The resin to hardener mix ratio: 1:1 by weight or volume
Full instructions supplied
Non-toxical substances eliminate the need for wearing a solder mask during application
No pre or post clean is required
Compatible with a wide range of materials
Suitable for substrates that cannot be soldered
Superior durability, thermal, shock and chemical resistance
High electrical conductivity
The resin to hardener mix ratio: 1:1 by weight or volume
Full instructions supplied
Non-toxical substances eliminate the need for wearing a solder mask during application
No pre or post clean is required
Typical Applications:
Silver-based conductive epoxies are widely used for interconnecting and mechanical bonding components to circuits due to excellent electrical conductivity. They are also suitable for use with most plastics, ceramics, wood, metal, glass and graphite as an excellent glue.
Typical applications: as a replacement for soldered/brazed joints where the temperature is a consideration, and as a thermally conductive adhesive.
Typical applications: as a replacement for soldered/brazed joints where the temperature is a consideration, and as a thermally conductive adhesive.
Specificaties
Kenmerk | Waarde |
---|---|
Adhesive Type | Conductive Adhesive |
Application | Thermal Management |
Material Compatibility | Ceramic, Glass, Metal, Plastic |
Product Form | Liquid |
Package Type | Can |
Package Size | 10 g |
Cure Time | 36 h |
Maximum Operating Temperature | +150°C |
Special Features | Thermally Conductive |
Specific Gravity | 2.85 |
Minimum Operating Temperature | -55°C |
Odour | Mild Amine-like |
Chemical Composition | 6-Diazaoctanethylenediamin, Silver, 3 |
Operating Temperature Range | -55 → +150 °C |