CTEK XS 0.8 Battery Charger For Lead Acid 12 V 12V 800mA with EU plug
- RS-stocknr.:
- 793-4098
- Fabrikantnummer:
- CEP1H37
- Fabrikant:
- CTEK
45 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 85,16
(excl. BTW)
€ 103,04
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 85,16 |
- RS-stocknr.:
- 793-4098
- Fabrikantnummer:
- CEP1H37
- Fabrikant:
- CTEK
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
CTEK XS 0.8 Battery charger new generation charging for smaller batteries
The CTEK XS 800 series lead-acid battery charger with pulse maintenance charges and conditions your 12V battery quickly, easily and safely. It constantly monitors the battery after it has been initially charged and only 'trickle charges' the battery when the voltage drops due to alarms or natural drainage. This charger eliminates the danger of overcharging and allows it to be safely connected for months at a time, This is ideal for charging 12 V batteries from 1.2 A hour to 32 A hour. Also, it is suitable for maintaining the batteries of cars, motorcycles and other vehicles up to 100A hour. This battery charger has an output voltage of 12V and charging current of 800mA.
Note:
If the power connection is the flat European contact type, the battery charger has insulation class IP63, except in Switzerland where IP65 is valid.
Note:
If the power connection is the flat European contact type, the battery charger has insulation class IP63, except in Switzerland where IP65 is valid.
Features and Benefits
- The supply voltage is between 220VAC and 240VACAmbient temperature ranges between -20ﾟC and 50ﾟC
- Output power is reduced automatically at higher temperatures
- Charger type is eight step, fully automatic charging cycle
- Battery capacity ranges between 20A hour and 200A hour
- Charge current is 800mA
- Input voltage ranges between 220VAC and 240VAC
- Fully automatic for optimal charging
- 12V for all lead-acid batteries
- Fully automatic charging and maintenance in 6 steps maximizes battery life and performance
- Numerous accessories simplify using the same charger for multiple batteries
- Water-resistant so that the solution could be taken to the problem even if it rains or snows
- Patented maintenance charge for a unique combination of maximized life and performance
- Patented desulphation that extends the battery lifeNo sparks, short-circuit proof and reverse-polarity protected for
- untroubled
- usage
Supplied with:
1 battery lead with a battery clip and 1 battery lead with a ring cable lug
Certifications
IP63 rated
IP65 rated in Switzerland
IP65 rated in Switzerland
Specificaties
Kenmerk | Waarde |
|---|---|
| Battery Sizes Charged | 12 V |
| Chemistries Charged | Lead Acid |
| Output Voltage | 12V |
| Charge Current | 800mA |
| Plug Type | EU |
| Number of Batteries Charged | 1 |
| Input Voltage | 220 → 240V ac |
| Battery Type Charged | Automotive |
| Batteries Included | No |
| Number of Charge Stages | 6 |
| Model Number | XS 0.8 |
| Dimensions | 142 x 51 x 36mm |
| Weight | 400g |