- RS-stocknr.:
- 177-2856
- Fabrikantnummer:
- MCP25625T-E/ML
- Fabrikant:
- Microchip
3200 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Elk (op een haspel van 1600)
€ 2,39
(excl. BTW)
€ 2,89
(incl. BTW)
Aantal stuks | Per stuk | Per reel* |
1600 + | € 2,39 | € 3.824,00 |
*prijsindicatie |
- RS-stocknr.:
- 177-2856
- Fabrikantnummer:
- MCP25625T-E/ML
- Fabrikant:
- Microchip
Datasheets
Wetgeving en compliance
Productomschrijving
The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters required. In addition, the MCP25625 connects directly to the physical CAN bus, supporting all requirements for CAN high-speed transceivers.
Stand-Alone CAN2.0B Controller with Integrated CAN Transceiver and Serial Peripheral Interface (SPI)
Up to 1 Mb/s Operation
Very Low Standby Current (10 μA, typical).
Up to 10 MHz SPI Clock Speed
Interfaces Directly with Microcontrollers with 2.7V to 5.5V I/O
Available in SSOP-28L and 6x6 QFN-28L
Temperature Ranges:
Extended (E): -40°C to +125°C
Up to 1 Mb/s Operation
Very Low Standby Current (10 μA, typical).
Up to 10 MHz SPI Clock Speed
Interfaces Directly with Microcontrollers with 2.7V to 5.5V I/O
Available in SSOP-28L and 6x6 QFN-28L
Temperature Ranges:
Extended (E): -40°C to +125°C
Specificaties
Kenmerk | Waarde |
---|---|
Maximum Data Rate | 1Mbps |
Number of Transceivers | 1 |
Standard Supported | CAN 2.0B |
IC Type | CAN Controller IC |
Power Down Mode | Sleep, Standby |
Maximum Supply Current | 10 mA |
Mounting Type | Surface Mount |
Package Type | QFN |
Pin Count | 28 |
Dimensions | 6 x 6 x 0.92mm |
Length | 6mm |
Width | 6mm |
Height | 0.92mm |
Maximum Operating Supply Voltage | 5.5 V |
Maximum Operating Temperature | +125 °C |
Minimum Operating Supply Voltage | 2.7 V |
Minimum Operating Temperature | -40 °C |