- RS-stocknr.:
- 408-9697
- Fabrikantnummer:
- DS-MIXT-05-RSU
- Fabrikant:
- TE Connectivity
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29-07-2024, met een levertijd van 1 werkdag.
Prijs Per stuk
€ 105,80
(excl. BTW)
€ 128,02
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 105,80 |
5 + | € 91,93 |
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 408-9697
- Fabrikantnummer:
- DS-MIXT-05-RSU
- Fabrikant:
- TE Connectivity
Wetgeving en compliance
- Land van herkomst:
- MX
Productomschrijving
TE Connectivity Duraseal Terminal and Splice Service and Repair Kit 2
This handy Duraseal terminal and splice service and repair kit contains a range of insulated Duraseal terminals, with a wire size range of 0.5mm to 6mm2 and in blue, red and yellow colours. This Duraseal terminal and splice service and repair kit comes in a sturdy plastic storage case with convenient compartments and a locking lid.
For details of kit contents please see table.
For details of kit contents please see table.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
Specificaties
Kenmerk | Waarde |
---|---|
Type | DuraSeal Service and Repair |
Connector Type | Heat Shrink Terminals and Splices |
Kit Contents | 0 x Duraseal Splice, 10 x Durseal Spade, 100 x Durseal Ring Terminal, 25 x Durseal Receptacle |
Contact Material | Copper |