- RS-stocknr.:
- 158-5710
- Fabrikantnummer:
- 77 02 115 SB
- Fabrikant:
- Knipex
- RS-stocknr.:
- 158-5710
- Fabrikantnummer:
- 77 02 115 SB
- Fabrikant:
- Knipex
Wetgeving en compliance
Niet conform
- Land van herkomst:
- DE
Productomschrijving
Electronic side cutter
Tools with precision box joint and captive, low-friction double spring
Special tool steel, oil hardened and tempered
Mirror finish with good rust protection
Two-component handles for easy use
Special tool steel, oil hardened and tempered
Mirror finish with good rust protection
Two-component handles for easy use
Standards
DIN ISO 9654
Electronic cutting pliers small bevel 115mm
Features / Benefits :
Optimized shape for a more direct feel
Robust, backlash-free interlocking hinge
Low-friction double spring for smooth, even opening of the clamp
Mirror polishing in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Laser hardened cutting edges with a hardness of at least 60 HRC
Thin sheaths on the pliers head ensure safe and comfortable guidance, even between thumb and forefinger
Round head with small bevel
Hardness of the cutting edges approx. 60 HRC
Robust, backlash-free interlocking hinge
Low-friction double spring for smooth, even opening of the clamp
Mirror polishing in combination with the thin oil layer provides good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles
Laser hardened cutting edges with a hardness of at least 60 HRC
Thin sheaths on the pliers head ensure safe and comfortable guidance, even between thumb and forefinger
Round head with small bevel
Hardness of the cutting edges approx. 60 HRC
Cutting head: tool steel in special quality, forged, oil-hardened
Specificaties
Kenmerk | Waarde |
---|---|
Model Number | 77 02 |
Cutter Type | Side Cutters |
Non Sparking | No |
Overall Length | 115 mm |
VDE/1000V Approved | No |
Height Safe | No |
ESD Safe | No |
Material | Chrome-Plated Steel with Ball Bearings |
Maximum Cutting Capacity | 1.6mm |
Cutting Capacity Medium Hard Wire | 0.6mm |
Cutting Capacity Copper Wire | 1.6mm |
Cut Type | Small Bevel |
Cutting Capacity Soft Wire | 1.6mm |
Cutting Capacity Hard Wire | 0.6mm |
Cutting Capacity Soft Steel Wire | 1.2mm |
Cutting Capacity Stranded Wire | 1.2mm |