- RS-stocknr.:
- 180-9700
- Fabrikantnummer:
- HR2470BX40
- Fabrikant:
- Makita
5 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 198,44
(excl. BTW)
€ 240,11
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 198,44 |
- RS-stocknr.:
- 180-9700
- Fabrikantnummer:
- HR2470BX40
- Fabrikant:
- Makita
Datasheets
Wetgeving en compliance
- Land van herkomst:
- RO
Productomschrijving
Makita Hammer Drill
The Makita SDS-plus rotary hammer drill is equipped with a powerful 780W motor and impact energy of 2.4J. It has a type-F Schuko plug. The high-quality rubber cable with a lush length of 4m is installed.
Features and Benefits
• Added durability to impact bolt and rubber ring at the commutator end of armature
• Anti-vibration construction of the motor section
• Easy-to-operate large trigger switch and lock-on button
• High abrasion resistance in gears and inlaid portion of inner housing
• High durability in mechanical parts, motor and carbon brush
• Idle stroke rate: 0 - 4, 500/min
• Idling speed: 0 - 1, 100/min
• Inner construction is designed so as to direct the flow of cooling air to minimize the chance of armature wire breaking due caused by dust
• One-touch sliding chuck enables easy bit change
• Speed and torque in reverse are the same as forward rotation by using brush holder unit
• Anti-vibration construction of the motor section
• Easy-to-operate large trigger switch and lock-on button
• High abrasion resistance in gears and inlaid portion of inner housing
• High durability in mechanical parts, motor and carbon brush
• Idle stroke rate: 0 - 4, 500/min
• Idling speed: 0 - 1, 100/min
• Inner construction is designed so as to direct the flow of cooling air to minimize the chance of armature wire breaking due caused by dust
• One-touch sliding chuck enables easy bit change
• Speed and torque in reverse are the same as forward rotation by using brush holder unit
Applications
• Chiselling in concrete, wood and stone
• Drilling in concrete, ferrous metals, wood, plastic and stone.
• Drilling in concrete, ferrous metals, wood, plastic and stone.
Specificaties
Kenmerk | Waarde |
---|---|
Drill Type | SDS Drill |
Voltage Rating | 230V |
Corded/Cordless | Corded |
Brushed/Brushless Motor | Brushed |
Chuck Type | SDS Plus |
Orientation | Straight |
Weight | 2.9kg |
Hammer Action | Yes |
Wattage | 780W |
Plug Type | Type C - Euro Plug |
Model Number | HR2470 |