BK Precision 8500 Series Electronic DC Load, 0 → 150 W, 0.1 → 60 V, 0 → 30 A
- RS-stocknr.:
- 817-2210
- Fabrikantnummer:
- BK8540
- Fabrikant:
- BK Precision
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 660,00
(excl. BTW)
€ 798,60
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 660,00 |
- RS-stocknr.:
- 817-2210
- Fabrikantnummer:
- BK8540
- Fabrikant:
- BK Precision
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CN
Productomschrijving
B&K Precision 150W DC Electronic Load, Model BK8540
The BK8540 DC electronic load is a compact, economically priced instrument equally well-suited for use on the bench and the production floor. Although it comes in a small package, the BK8540 can reliably test a 5-volt power supply to 30 amps and do it continuously.
The load can operate in CC, CV or CR mode while voltage/current or resistance/power values are measured and displayed in real time, offering the flexibility to test a variety of DC power sources.
The BK8540 performance is comparable to that of most full-size bench DC electronic loads, but it can do the job at lower cost and takes up less space.
The load can operate in CC, CV or CR mode while voltage/current or resistance/power values are measured and displayed in real time, offering the flexibility to test a variety of DC power sources.
The BK8540 performance is comparable to that of most full-size bench DC electronic loads, but it can do the job at lower cost and takes up less space.
Features and Benefits:
- Full digital control
- Input on/off control
- Operates between 0-60 Vdc, 1 mA-30 A (150W maximum)
- Easy operation
- Bright, easy-to-read LED display
- Very compact and lightweight
- Two current ranges: 3 A (1 mA resolution) and 30 A (10 mA resolution)
- Constant current (CC), constant resistance (CR) and constant voltage (CV) operation
- Overcurrent and overvoltage protection for great reliability
- Short mode to simulate shorts
- Save up to 400 instrument settings
Specificaties
Kenmerk | Waarde |
|---|---|
| Series | 8500 |
| Load Type | Programmable |
| Constant Voltage Mode Range | 0.1 → 60 V |
| Constant Current Mode Range | 0 → 30 A |
| Constant Resistance Mode Range | 10 → 4000 Ω |
| Constant Wattage Mode Range | 0 → 150 W |
- RS-stocknr.:
- 817-2210
- Fabrikantnummer:
- BK8540
- Fabrikant:
- BK Precision