- RS-stocknr.:
- 609-6805
- Fabrikantnummer:
- XE2SP4151
- Fabrikant:
- Schneider Electric
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-05-2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk
€ 14,11
(excl. BTW)
€ 17,07
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 14,11 |
5 - 9 | € 13,68 |
10 + | € 13,23 |
- RS-stocknr.:
- 609-6805
- Fabrikantnummer:
- XE2SP4151
- Fabrikant:
- Schneider Electric
Wetgeving en compliance
- Land van herkomst:
- FR
Productomschrijving
Schneider Electric Footswitches - XPE Range
A wide range of metal housed footswitches brought to you from Schneider Electric, ensuring you start on the right foot! They are available with or without a protective guard cover. The guarded cover types are strongly recommended in high-risk areas where accidental starting of a machine, either by human action or falling objects could occur.
Large surface area of pedal assures stability of foot and provides operator comfort
High and wide protective cover accommodates large sizes and safety boots
Can be fixed to the floor or on a support for improved stability
Approvals - U/CSA
Schneider Electrics XPE range of industrial footswitches are robust
A great feature of this range of foot switches is that they allow the operator greater freedom of movement
Available with or without trigger mechanism in 1 or 2 step configurations
The trigger mechanism types of footswitch enable locking of the pedal in rest position, positive action is required before the pedal can be depressed
Footswitches within the XPE range that feature 2-step contact operation are ideal for applications involving 2-speed machines
The first step (6mm travel) operates one set of NC + NO contacts before the second step operates the other NC + NO contacts during full actuator travel (12mm)
High and wide protective cover accommodates large sizes and safety boots
Can be fixed to the floor or on a support for improved stability
Approvals - U/CSA
Schneider Electrics XPE range of industrial footswitches are robust
A great feature of this range of foot switches is that they allow the operator greater freedom of movement
Available with or without trigger mechanism in 1 or 2 step configurations
The trigger mechanism types of footswitch enable locking of the pedal in rest position, positive action is required before the pedal can be depressed
Footswitches within the XPE range that feature 2-step contact operation are ideal for applications involving 2-speed machines
The first step (6mm travel) operates one set of NC + NO contacts before the second step operates the other NC + NO contacts during full actuator travel (12mm)
Schneider Electric Foot Switch Contact Block, Replacement Accessory, Snap-Action Type - Harmony XPE Series - XE2SP4151
To keep your pedal-powered switches trucking along, trust this foot switch contact block from Schneider Electric. It's designed to make or break an electrical circuit when installed with a compatible switching device. This lets you stop or start connected machinery, including safety devices, in a jiffy. The block measures a standard 25 (H) x 30 (W) x 40mm (L) and only weighs 20g, so it fits neatly into your setup and keeps it free from excess load.
Features & Benefits
• Maximum operating humidity of 95% RH for use in areas prone to high moisture levels
• Screw connection allows for a speedy setup using a slotted or Phillips screwdriver
• Broad operating temperature range of -20°C to +60°C, so it holds its own in harsh environments
• Screw connection allows for a speedy setup using a slotted or Phillips screwdriver
• Broad operating temperature range of -20°C to +60°C, so it holds its own in harsh environments
Applications
• Industrial automation and control
• Assembly lines
• Machine tooling
• Pick and pack conveyors
• Assembly lines
• Machine tooling
• Pick and pack conveyors
Can I use this contact block to control equipment with two operating speeds?
Yes. This component is compatible with two-step foot switches, so you can use it with equipment that runs at two operating speeds.
Specificaties
Kenmerk | Waarde |
---|---|
Accessory Type | Contact Element |
For Use With | Foot Switch |
- RS-stocknr.:
- 609-6805
- Fabrikantnummer:
- XE2SP4151
- Fabrikant:
- Schneider Electric