BALLUFF Inductive Barrel-Style Proximity Sensor, M18 x 1, 8 mm Detection, PNP Output, 10 → 30 V dc, IP67
- RS-stocknr.:
- 124-3724
- Fabrikantnummer:
- BES M18MI-PSC80A-S04G-W12
- Fabrikant:
- BALLUFF
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 124-3724
- Fabrikantnummer:
- BES M18MI-PSC80A-S04G-W12
- Fabrikant:
- BALLUFF
Datasheets
Wetgeving en compliance
- Land van herkomst:
- SG
Productomschrijving
BES 3 / 4Wire M18 Inductive Proximity Sensor
This range of M18 cylindrical inductive proximity sensors from the BALLUFF BES series are designed to be used in a wide vareity of metal detection applications with in industrial environments.
Pre cabled or connector
Flush shielded or non-flush unshielded
3 wire DC configuration
Flush shielded or non-flush unshielded
3 wire DC configuration
Specificaties
Kenmerk | Waarde |
|---|---|
| Sensor Technology | Inductive |
| Thread Size | M18 x 1 |
| Body Style | Barrel |
| Output Type | PNP |
| Detection Range | 8 mm |
| Terminal Type | 4-Pin M12 Connector |
| IP Rating | IP67 |
| Supply Voltage | 10 → 30 V dc |
| Length | 66mm |
| Maximum DC Voltage | 30V |
| Mounting Type | Flush |
| Switching Current | 200 mA |
| Maximum Switching Frequency | 600Hz |
| Shielding | Shielded |
| Housing Material | Brass |
| Maximum Operating Temperature | +70°C |
| Standards Met | CE, cULus, IEC 60947-5-2 |
| Minimum Operating Temperature | -25°C |
| Short Circuit Overload Protection | Yes |
| Reverse Polarity Protection | Yes |