Broyce Control Phase, Voltage Monitoring Relay, 3 Phase, DPDT, 243 → 540 V, DIN Rail

RS-stocknr.:: 135-6179
Fabrikantnummer:: LPRT/2 400V
Fabrikant:: Broyce Control

Broyce Control Phase, Voltage Monitoring Relay, 3 Phase, DPDT, 243 → 540 V, DIN Rail

5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)

56 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)

Toegevoegd

Prijs Per stuk

€ 91,09

(excl. BTW)

€ 110,22

(incl. BTW)

Aantal stuks	Per stuk
1 +	€ 91,09

RS-stocknr.:: 135-6179
Fabrikantnummer:: LPRT/2 400V
Fabrikant:: Broyce Control

Datasheets

Wetgeving en compliance

Land van herkomst:: GB

Productomschrijving

LPRT/2 Phase Failure, Phase Sequence, Under Voltage plus Time Delay

Broyce Controls L-Series signal conditioners use a QR barcode marking method allowing direct access to all technical data sheets, ensuring correct information is always at your finger tips!

Features and Benefits

Compact 17.5 mm DIN Rail housing

Microprocessor based

True R.M.S. monitoring measuring phase to phase (three wire) or phase to neutral (4-wire) voltages

Selectable nominal voltages to suit most popular three wire or 4-wire supply voltages

Monitors own supply and detects an Under voltage condition on one or more phases

Detects incorrect phase sequence, phase loss and neutral loss1

Adjustment for Under voltage trip level

Adjustment for time delay

DPDT relay output 5A

Green LED indication for supply status

Red LED indication for relay status

Approvals

UL Certification

Broyce Monitor Relays

Relay controllers manufactured using flame retardant material to UL94 VO
Electrical life: ≥150 000 operations
Suitable for use within ambient temperature environments from -20 to +60°C (except stock no. 361-1710 and 361-1681 which are suitable from -20 to +50°C)

Note

Output relay contact rating specified at 250Vac

Specificaties

Kenmerk	Waarde
Monitoring Application	Phase, Voltage
Electrical Phase	3
Voltage Sensing Range	243 → 540 V
Contact Configuration	DPDT
Voltage Sensitivity	Undervoltage
Mounting Type	DIN Rail
Phase Sensitivity	Phase Failure, Phase Sequence
Time Delay	0.2 → 10s
Series	L
Maximum Voltage Sensed	540V
Number of Poles	2
Special Features	Microprocessor Based, Detects Incorrect Phase Sequence, Phase Loss And Neutral Loss, Adjustment For Under Voltage Trip Level, Adjustment For Time Delay
Operating Temperature Range	+60°C
Terminal Type	Screw
Dimensions	66.5 x 17.5 x 89mm
Minimum Voltage Sensed	243 V
Length	66.5mm
Maximum Operating Temperature	+60°C
Width	17.5mm
Height	89mm
Minimum Operating Temperature	-20°C

RS-stocknr.:: 135-6179
Fabrikantnummer:: LPRT/2 400V
Fabrikant:: Broyce Control