- RS-stocknr.:
- 667-9286
- Fabrikantnummer:
- IDFA3E-23
- Fabrikant:
- SMC
- RS-stocknr.:
- 667-9286
- Fabrikantnummer:
- IDFA3E-23
- Fabrikant:
- SMC
Wetgeving en compliance
- Land van herkomst:
- SG
Productomschrijving
Refrigerant Air Dryer
CE compliant
Single phase supply
Stainless Steel plate heat exchanger
Single phase supply
Stainless Steel plate heat exchanger
Note
Flow rates delivering 10°C dew point with inlet conditions of 35°C and 7 bar.
Dry Air Systems
Compressed air is an essential power source that is widely used throughout industry. This safe, powerful and reliable utility can be the most important part of a production process. However compressed air will contain water, dirt, wear particles, bacteria and even degraded lubricating oil which all mix together to form an unwanted abrasive sludge. This sludge, often acidic, rapidly wears tools and pneumatic machinery, block valves and orifices causing high maintenance and costly leaks. It also corrodes piping systems and can bring a production process to an extremely expensive standstill. Only compressed air that is totally clean and dry will ensure maximum savings.
Specificaties
Kenmerk | Waarde |
---|---|
Type | Refrigerant |
Inlet Port Size | Rc 3/8 |
Manufacturer Series | IDFA |
Outlet Port Size | Rc 3/8 |
Typical Flow Rate | 12 m³/h @ 3 °C, 15 m³/h @ 7 °C, 17 m³/h @ 10 °C |
Maximum Ambient Operating Temperature | +40°C |
Minimum Ambient Operating Temperature | +2°C |
Minimum Process Operating Temperature | +5°C |
Minimum Operating Inlet Pressure | 0.15bar |
Inlet Port Thread Standard | Rc |
Maximum Operating Inlet Pressure | 10bar |
Process Operating Temperature Range | +5 → +50°C |
Maximum Process Operating Temperature | +50°C |
Ambient Operating Temperature Range | +2 → +40°C |