Better World
Schneider Electric 32A Rail Mount Fuse Holder for 10 x 38mm Fuse, 3P, 690V ac
- RS-stocknr.:
- 482-859
- Fabrikantnummer:
- DF103
- Fabrikant:
- Schneider Electric
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
77 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 29,40
(excl. BTW)
€ 35,57
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 29,40 |
| 5 - 24 | € 26,78 |
| 25 - 49 | € 25,69 |
| 50 - 99 | € 24,18 |
| 100 + | € 22,58 |
Better World
Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen. Klik hier voor meer informatie.
- RS-stocknr.:
- 482-859
- Fabrikantnummer:
- DF103
- Fabrikant:
- Schneider Electric
Wetgeving en compliance
- Land van herkomst:
- FR
Productomschrijving
Schneider Electric Rail Mount Fuse Holder, 32A, 690V - TeSys DF Series - DF103
This fuse holder from the Schneider Electric TeSys range protects low voltage equipment from the damaging effects of short circuits. It works together with a fuse cartridge containing a wire, which quickly melts when excessive currents are experienced. The component is easy to mount onto a DIN rail and features a slim profile to save space on your circuit board. It's able to detect both high and low current fluctuations for improved safety in electrical systems.
Features & Benefits
• IP20 (ingress protection) rating indicates that the fuse holder is touch-proof and protected against objects larger than 12mm
• End-of-life optimised to decrease waste and allow recovery of the product's internal components and materials
• End-of-life optimised to decrease waste and allow recovery of the product's internal components and materials
Applications
• Power supply industry
• Conveyor lines
• Water and waste management industries
• Conveyor lines
• Water and waste management industries
Can I lock this fuse holder?
While you can't lock this fuse holder, you do have the option to mount it inside of any standard lockable outer case, if necessary.
Do I need a screwdriver to wire this holder?
Yes, you need a Phillips screwdriver to remove or attach wiring to its screw clamps.
Standards
IEC 60947-3, UL 512, CSA 22-2 n° 39
Specificaties
Kenmerk | Waarde |
|---|---|
| Fuse Holder Type | Rail Mount |
| Range | TeSys |
| Fuse Size | 10 x 38mm |
| Current Rating | 32A |
| Voltage Rating | 690V ac |
| Number of Poles | 3P |
| Rail Type | DIN 35 mm |
| Better World Verification | Green Premium |
| Better World Product | Yes |
| Terminal Type | Screw |
| Series | DF |
| International Protection Rating | IP20 |
| Standards Met | CCC, CSA, UL |