- RS-stocknr.:
- 918-4817
- Fabrikantnummer:
- 2700
- Fabrikant:
- Loctite
- RS-stocknr.:
- 918-4817
- Fabrikantnummer:
- 2700
- Fabrikant:
- Loctite
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- IE
Productomschrijving
Loctite 2700
High-strength anaerobe screwlock, for long-term sealing of thread connections
Resistant to chemicals, depending on the medium, suitable for temperatures from -55 → 150 °C
Release torque 20 Nm
Dismantling only possible after heating to 250°C
Prevents independent loosening and seal breaks caused by impact or vibrations
Developed for connections that will not be dismantled later
Resistant to chemicals, depending on the medium, suitable for temperatures from -55 → 150 °C
Release torque 20 Nm
Dismantling only possible after heating to 250°C
Prevents independent loosening and seal breaks caused by impact or vibrations
Developed for connections that will not be dismantled later
LOCTITE 2700 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates. Slight contamination is tolerated. LOCTITE 2700 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.
No hazard symbols, no risk phrases & no safety phrases
High strength general threadlocker for maximum efficacy
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
Can be disassembled by heating to 300°C
WRAS Approval (BS 6920): 1104508
Improved cure strength on zinc-flake coated steel
Thread size = M20
High strength general threadlocker for maximum efficacy
Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
Can be disassembled by heating to 300°C
WRAS Approval (BS 6920): 1104508
Improved cure strength on zinc-flake coated steel
Thread size = M20
Specificaties
Kenmerk | Waarde |
---|---|
Trade Name | Loctite 2700 |
Application | Threadlocking |
Material Compatibility | Metal |
Threadlocking Strength | High |
Cure Time | 24 h |
Anaerobic | Yes |
Colour | Green |
Product Form | Liquid |
Package Type | Bottle |
Package Size | 5 ml |
Maximum Operating Temperature | +150°C |
Minimum Operating Temperature | -55°C |
Operating Temperature Range | -55 → +150 °C |
Special Features | Anaerobic |
Specific Gravity | 1.1 |
Odour | Characteristic |
Viscosity Measurement | 350 → 550mPa/s |
Viscosity Description | Low Viscosity |