- RS-stocknr.:
- 286-1009
- Fabrikantnummer:
- 9020000000
- Fabrikant:
- Weidmüller
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 225,12
(excl. BTW)
€ 272,40
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 225,12 |
5 + | € 192,70 |
- RS-stocknr.:
- 286-1009
- Fabrikantnummer:
- 9020000000
- Fabrikant:
- Weidmüller
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Stripax plus pliers and wire-end ferrules
Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm2 and crimp wire-end ferrules with the same cross section.
Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 and with DIN 6228. Automatic feeding of wire-end ferrules.
The wire-end ferrules are supplied in packs of 500 split into strips of 50 parts each (see stock numbers 204-6682, 204-6698, 204-6705, 204-6711 and 204-6727)
Stock number 204-6676 is a kit consisting of a carry case containing 1 x pliers, 250 x 1mm2 wire-end ferrules and 250 x 1.5 mm2 wire-end ferrules.
Stock number 286-1009 is a STRIPAX PLUS 2.5 crimp tool
Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 and with DIN 6228. Automatic feeding of wire-end ferrules.
The wire-end ferrules are supplied in packs of 500 split into strips of 50 parts each (see stock numbers 204-6682, 204-6698, 204-6705, 204-6711 and 204-6727)
Stock number 204-6676 is a kit consisting of a carry case containing 1 x pliers, 250 x 1mm2 wire-end ferrules and 250 x 1.5 mm2 wire-end ferrules.
Stock number 286-1009 is a STRIPAX PLUS 2.5 crimp tool
Specificaties
Kenmerk | Waarde |
---|---|
Stripping Range | 0.5 → 2.5mm² |
Minimum Size | 0.5mm |
Maximum Size | 210mm |
Series | STRIPAX |
- RS-stocknr.:
- 286-1009
- Fabrikantnummer:
- 9020000000
- Fabrikant:
- Weidmüller