MCBs

MCBs, or miniature circuit breakers, are a type of switch used to automatically turn off electrical circuits during abnormal conditions. MCBs often replace fuses in low voltage electrical circuits as they can be more reliable, much more sensitive and are resettable.


How an MCB Works


When continuous overcurrent flows through an MCB, a bimetallic strip is heated and causes it to bend. This bending of the bimetallic strip releases a mechanical latch opening the contacts and turning off the MCB, thereby stopping the current to flow in the circuit. To restart the flow of current the MCB must be manually turned on. This mechanism protects the MCB from faults arising due to overcurrent or overload and is intended to prevent the accidental overloading of the cable in a no-fault situation. The speed of the MCB tripping will vary with the degree of the overload. This is usually achieved by the use of a thermal device in the MCB. The second characteristic is the magnetic fault protection, which is intended to operate when the fault reaches a predetermined level and to trip the MCB within one-tenth of a second. The level of this magnetic trip gives the MCB its type characteristic.


MCBs are used to perform many functions such as local control switches, isolating switches against faults and overload protection devices for installation or specific equipment or appliances.


MCB Types


MCBs have three common types for circuit protection in residential, commercial and industrial applications. The use is classified by a type, which determines the tripping characteristics of the MCB:


Type B - trips between 3 and 5 times the load current


This type will trip instantly at a rate of three to five times its rated current. These are normally used for resistive or small inductive loads where switching surges are very small. Therefore, these are suitable for residential or light commercial installations.


Type C - trips between 5 and 10 times the full load current


This type will trip instantly at a rate of five to ten times its rated current. These are normally used for high inductive loads where switching surges are high such as small motors and fluorescent lighting. In such cases, type C MCBs are preferred to handle higher value of short circuit currents. Therefore, these are suitable for highly inductive commercial and industrial installations.


Type D - trips between 10 and 20 times the full load current


This type will trip instantly at a rate of ten to twenty-five times its rated current. These are normally used for very high inductive loads where high inrush current is very frequent. These are suitable for specific industrial and commercial applications. The common examples of such applications include x-ray machines, UPS systems, industrial welding equipment, large winding motors, etc.


How to select a suitable MCB for the application?


Focus on 3 main points to choose the right MCB for the electrical circuit


  1. Ampere rating

  2. Short circuit breaking capacity

  3. Application type

...
Lees meer Lees minder

Filters

21 - 40 van 2047 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Number of Poles Current Rating Model Number Range Series Tripping Characteristics Rated AC Voltage Rated DC Voltage Breaking Capacity Mounting Style Length Width Depth Application
RS-stocknr. 132-122
Fabrikantnummer2CDS272001R0164
FabrikantABB
€ 56,10
Each
Aantal stuks
2 16 A - System M Pro S200 Type C 440 V 125V 10 kA - 88mm 35mm 75.8mm -
RS-stocknr. 624-0456
FabrikantnummerFAZ-C10/3
FabrikantEaton
€ 90,16
Each
Aantal stuks
3 10 A - XEffect FAZ Type C 400 V - 10 kA - 80mm 52.5mm 73.5mm -
RS-stocknr. 847-3147
FabrikantnummerFAZ-B16/2
FabrikantEaton
€ 38,18
Each
Aantal stuks
2 16 A - XEffect FAZ Type B 240 → 415 V - 10 kA - 36mm 84.7mm 72.6mm -
RS-stocknr. 527-9633
FabrikantnummerS203-D32
FabrikantABB
€ 61,79
Each
Aantal stuks
3 32 A - System M Pro S200 Type D 440 V - 6 kA - - - 75.8mm -
RS-stocknr. 734-9652
FabrikantnummerA9F75206
€ 81,66
Each
Aantal stuks
2 6 A - Acti 9 iC60N Type D 12 → 60 V, 100 → 130 V, 220 → 240 V, 380 → 415 V, 400 V, 440 V 12 → 144V 6 kA - - - - -
RS-stocknr. 734-9251
FabrikantnummerA9F74604
€ 94,20
Each
Aantal stuks
1 + N 4 A - Acti 9 iC60N Type C 12 → 60 V, 100 → 130 V, 220 → 240 V, 230 V - 6 kA - - 36mm - -
RS-stocknr. 922-7122
FabrikantnummerFAZ-C25/3N
FabrikantEaton
€ 121,31
Each
Aantal stuks
3 25 A - XEffect FAZ Type C 240 → 415 V 96V 10 kA - 53.1mm 65.5mm 80mm Appliances, Business Equipment, Control Circuit, Lighting, Supplementary Protection
RS-stocknr. 772-1486
Fabrikantnummer5SY6016-6
FabrikantSiemens
€ 38,28
Each
Aantal stuks
1 + N 16 A - Sentron 5SY6 Type B 230 V - 6 kA - - 18mm 77mm -
RS-stocknr. 488-7457
Fabrikantnummer2CDS251001R0065 - S201B6
FabrikantABB
€ 19,27
Each
Aantal stuks
1 6 A - System M Pro S200 Type B 253 V 72V 6 kA - 88mm 17.5mm 75.8mm -
RS-stocknr. 486-883
FabrikantnummerPXL-B16/1
FabrikantEaton
€ 3,85
Each
Aantal stuks
1 16 A - XPole PXL, S200 Type B 400 V 48V 10 kA - 17.5mm 80mm 60mm -
RS-stocknr. 746-7558
FabrikantnummerS202-B6
FabrikantABB
€ 33,23
Each
Aantal stuks
2 6 A - System M Pro S200 Type B 400 V - 6 kA - 88mm 35mm 69mm -
RS-stocknr. 455-6327
FabrikantnummerS202-C16
FabrikantABB
€ 59,54
Each
Aantal stuks
3 - - System M Pro S200 - - - - - 57.5mm 96.5mm 46.5mm -
RS-stocknr. 814-7438
Fabrikantnummer60105
€ 32,50
Each
Aantal stuks
1 4 A - - C60 Type C 120 → 240 V 60V 10 kA rms @ 240 V ac, 10 kA rms @ 60 V dc - 107mm 18mm 78.5mm -
RS-stocknr. 769-4564
FabrikantnummerFAZ6-C16/2
FabrikantEaton
€ 32,05
Each
Aantal stuks
2 16 A - XEffect FAZ6 Type C 230 → 400 V - 6 kA - 80mm 17.5mm 61.5mm -
RS-stocknr. 259-8313
Fabrikantnummer7216.2000.8
FabrikantKopp
€ 14,29
Each
Aantal stuks
2 16 A - - GREEN ELECTRIC Type B 230 → 400 V 60V 10 kA - - - - -
RS-stocknr. 539-8318
Fabrikantnummer2CDS213001R0325
FabrikantABB
€ 30,27
Each
Aantal stuks
3 32 A - System M Pro S200 Type B 440 V - 6 kA - 85mm 52.5mm 69mm -
RS-stocknr. 539-8374
Fabrikantnummer2CDS213001R0324
FabrikantABB
€ 27,78
Each
Aantal stuks
3 32 A - System M Pro S200 Type C 440 V - 6 kA - 85mm 52.5mm 69mm -
RS-stocknr. 746-7716
FabrikantnummerS202-C16
FabrikantABB
€ 31,50
Each
Aantal stuks
2 16 A - System M Pro S200 Type C 400 V - 6 kA - - - 69mm -
RS-stocknr. 746-7618
FabrikantnummerS203-B50
FabrikantABB
€ 48,51
Each
Aantal stuks
3 50 A - System M Pro S200 Type B 400 V - 6 kA - 88mm - 69mm -
RS-stocknr. 922-6999
FabrikantnummerFAZ-C2/1
FabrikantEaton
€ 21,60
Each
Aantal stuks
1 2 A - XEffect FAZ Type C 240 V 48V 10 kA - 17.8mm 65.5mm 80mm Appliances, Business Equipment, Control Circuit, Lighting, Supplementary Protection
Related Products
Electronic circuit protector type ESX10-T is designed to ...
Description:
Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current ...
SMISSLINE line safety switches with high rated switching ...
Description:
SMISSLINE line safety switches with high rated switching capacityPluggable in any positionFree selection and display of contacting phases (1-pole versions)Pole conductor contacting (L1, L2, L3) visible through inspection windowContact position display visible through inspection windowWith integrated input ...
The ABB S800 series high-performance automatic circuit breakers ...
Description:
The ABB S800 series high-performance automatic circuit breakers set a new standard of excellence, thanks to their high current rating, breaking capacity, selectivity and safety features. They are the ideal solution for protecting your systems. Compact design, excellent current limitation ...
Type B characteristic offers instantaneous short circuit response ...
Description:
Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications. DIN rail mountingComplies with ...