DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:
  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve
Types of DC MotorsThere are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.
  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and compressors, where reliability and ruggedness are required.

...
Lees meer Lees minder

Filters

201 - 206 van 206 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Length Width Depth Dimensions Current Rating Core Construction Series Standards Met
RS-stocknr. 192-5988
Fabrikantnummer28L28-416E.49
FabrikantPortescap
€ 188,40
Each
Aantal stuks
24 V dc - 11 W 5600 rpm 3mm 21 mNm 43.5mm - - 28 (Dia.) x 43.5 mm 530 mA Ironless - -
RS-stocknr. 181-7556
Fabrikantnummer625457
FabrikantMaxon
€ 268,50
Each
Aantal stuks
24 V Brushless 75 W 6870 RPM, 7950 RPM 4mm 107 mNm 64mm 30mm - 30 Dia. x 64 mm 3.64 A - DCX -
RS-stocknr. 181-7550
Fabrikantnummer500267
FabrikantMaxon
€ 319,80
Each
Aantal stuks
48 V Brushless 260 W 5000 RPM 10mm 964 mNm, 13100 (Stall) mNm 39.9mm 90mm - 90 Dia. x 39.9 mm 56.9 A - - -
RS-stocknr. 236-1717
Fabrikantnummer82830502
FabrikantCrouzet
€ 153,02
Each
Aantal stuks
24 V - 50 W 2770 rpm 8mm 170 mNm 103mm - - 63.2 (Dia.) x 103 mm 3 A Iron Core - -
RS-stocknr. 323-4846
Fabrikantnummer110045
FabrikantMaxon
€ 64,80
Each
Aantal stuks
12 V dc Brushed 2 W 12300 rpm 1.5mm 2.17 mNm 25.4mm - - 16 (Dia.) x 25.4 mm 243 mA Ironless - -
RS-stocknr. 236-1694
Fabrikantnummer82800502
FabrikantCrouzet
€ 85,74
Each
Aantal stuks
24 V dc Brushed 22 W 3070 rpm 6mm 70 mNm 84.8mm - - 50.2 (Dia.) x 84.8 mm 1.71 A Iron Core - -
Related Products
Sirius 3RM1 motor starters are compact 22.5 mm ...
Description:
Sirius 3RM1 motor starters are compact 22.5 mm wide devices that combine various functions in a single enclosure.They consist of combinations of relay contacts, power semiconductors (hybrid technology), and an electronic overload relay for switching induction under normal operating conditions. ...
The intelligent compact drive MCD EPOS P combines ...
Description:
The intelligent compact drive MCD EPOS P combines a brushless Maxon EC motor and a freely programmable digital positioning control unit EPOS with field-bus connections CAN and RS232. The standalone version of MCD EPOS can autonomously control single and multiple ...
The LR80 is a compact, high torque, direct-drive ...
Description:
The LR80 is a compact, high torque, direct-drive piezoelectric rotary motor for friction drive without backlash.Lack of gear-heads reduces the overall size so that LR80 often fits where other motors will not. In place, it delivers up to 80 mNm ...
The APM10 is a monitor- and protection unit ...
Description:
The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogue process signal for use in PLC's and other controllers. Transmitter for kW, 3 phase symmetrical loadFor connecting to a 3 phase net of ...