DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:
  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve
Types of DC MotorsThere are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.
  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and compressors, where reliability and ruggedness are required.

...
Lees meer Lees minder

Filters

81 - 100 van 212 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Length Width Depth Dimensions Current Rating Core Construction Series Standards Met
RS-stocknr. 468-4810
Fabrikantnummer118386
FabrikantMaxon
€ 71,68
Each
Aantal stuks
6 V dc Brushed 0.75 W 13000 rpm 1mm 0.784 mNm 17mm - - 10 (Dia.) x 17 mm 190 mA Ironless - -
RS-stocknr. 323-4903
Fabrikantnummer110124
FabrikantMaxon
€ 68,01
Each
Aantal stuks
18 V dc Brushed 5 W 9970 rpm 2mm 6.25 mNm 31.9mm - - 22 (Dia.) x 31.9 mm 374 mA Ironless - -
RS-stocknr. 495-108
Fabrikantnummer343016
FabrikantMaxon
€ 1.444,30
Each
Aantal stuks
12 → 50 V dc Brushless 60 W 12000 rpm - 5.4 Ncm 120mm 33mm 53mm 120 x 33 x 53 mm - - - -
RS-stocknr. 715-112
Fabrikantnummer82800043
FabrikantCrouzet
€ 123,82
Each
Aantal stuks
24 V dc Brushed 16 W 3100 rpm - 75 mNm - - - - - Iron Core - -
RS-stocknr. 789-3023
Fabrikantnummer89830012
FabrikantCrouzet
€ 169,71
Each
Aantal stuks
24 V dc Brushed 102 W 3000 rpm 8mm 180 mNm 130.5mm - - 63 (Dia.) x 130.5 mm 17.2 A Permanent Magnet - -
RS-stocknr. 752-1995
FabrikantRS PRO
€ 35,16
Each
Aantal stuks
4.5 → 15 V - 7 W 7300 rpm 6mm 114 gcm 78.8mm 37 (Dia.)mm - 37 (Dia.) x 78.8 mm 840 mA Metal - -
RS-stocknr. 238-9759
FabrikantRS PRO
€ 6,72
Each
Aantal stuks
4.5 → 15 V dc - 21.2 W 13360 rpm 3.18mm 154.4 gcm 50mm - - 35.8 (Dia.) x 50 mm 2.85 A Iron Core - -
RS-stocknr. 122-0031
Fabrikantnummer80280013
FabrikantCrouzet
€ 456,67
Each
Aantal stuks
10 to 36 V Brushless 84 W @ 12 V, 199 W @ 24 V, 251 W @ 32 V 800 rpm @ 12 V, 1900 rpm @ 24 V, 2400 rpm @ 32 V 8mm 1000 mNm 57.2mm 137mm 57.2mm 57.2 x 137 x 57.2 mm 12.5 A @ 32 V, 15 A @ 12 V, 15 A @ 24 V - 80280 TNi21 -
RS-stocknr. 512-6012
FabrikantnummerBLDC58-35 MK2
€ 187,64
Each
Aantal stuks
24 V dc Brushless 35 W 3650 rpm 5.99mm 0.11 Nm 62.1mm - - 68 (Dia.) x 62.1 mm 1.9 A - - -
RS-stocknr. 752-1961
FabrikantRS PRO
€ 40,42
Each
Aantal stuks
6 → 15 V - 7.98 W 14.5 rpm 6mm 78.4 gcm 80.5mm 32 (Dia.)mm - 32 (Dia.) x 80.5 mm 990 mA Metal - -
RS-stocknr. 752-1951
FabrikantRS PRO
€ 33,97
Each
Aantal stuks
4.5 → 15 V - 11 W 5216 rpm 6mm 206 gcm 86.6mm 37 (Dia.)mm - 37 (Dia.) x 86.6 mm 1.26 A Metal - -
RS-stocknr. 472-1284
Fabrikantnummer005203
€ 294,11
Each
Aantal stuks
22.5 V dc Brushed 94 W 3000 rpm 6mm 30 Ncm 37.7mm - - 120 (Dia.) x 37.7 mm 6.9 A - - -
RS-stocknr. 235-7831
FabrikantRS PRO
€ 188,42
Each
Aantal stuks
24 V dc Brushed 20 W 5300 rpm - 8.1 Ncm 450mm 40mm - 40 (Dia.) x 450 mm - Iron Core - -
RS-stocknr. 849-6254
Fabrikantnummer269.4102.3B.00
FabrikantDOGA
€ 375,41
Each
Aantal stuks
24 V dc - 236 W 3000 rpm - 0.75 Nm - - - - 15 A - - -
RS-stocknr. 512-6028
FabrikantnummerBLDC58-50 MK2
€ 222,99
Each
Aantal stuks
24 V dc Brushless 50 W 3650 rpm 5.99mm 0.17 Nm 62.1mm - - 68 (Dia.) x 62.1 mm 2.9 A - - -
RS-stocknr. 873-4809
Fabrikantnummer2657W024CXR
FabrikantFaulhaber
€ 194,68
Each
Aantal stuks
24 V dc Brushed 45.7 W 5110 rpm 4mm 40 mNm 69.4mm - - 26 (Dia.) x 69.4 mm 1.2 A Graphite 2657 -
RS-stocknr. 262-2135
Fabrikantnummer134384
FabrikantMaxon
€ 76,28
Each
Aantal stuks
6 V dc Brushed 5 W 6720 rpm - 0.633 Ncm - - - - - Ironless - -
RS-stocknr. 873-4795
Fabrikantnummer2224U012SR
FabrikantFaulhaber
€ 89,21
Each
Aantal stuks
12 V dc Brushed 4.05 W 4390 rpm 2mm 6.7 mNm 32.3mm - - 22 (Dia.) x 32.3 mm 520 mA Metal 2224 -
RS-stocknr. 834-7584
FabrikantRS PRO
€ 68,93
Each
Aantal stuks
9 → 15 V dc - - - - - 62mm 41mm 25mm 62 x 41 x 25 mm 12 (Continuous) A - 919D -
RS-stocknr. 225-9591
FabrikantRS PRO
€ 325,85
Each
Aantal stuks
24 V dc Brushed 221 W 3000 rpm 11.99mm 82 Ncm 95.5mm - - 215.1 (Dia.) x 95.5 mm 13.4 A - - RoHS
Related Products
Sirius 3RM1 motor starters are compact 22.5 mm ...
Description:
Sirius 3RM1 motor starters are compact 22.5 mm wide devices that combine various functions in a single enclosure.They consist of combinations of relay contacts, power semiconductors (hybrid technology), and an electronic overload relay for switching induction under normal operating conditions. ...
The intelligent compact drive MCD EPOS P combines ...
Description:
The intelligent compact drive MCD EPOS P combines a brushless Maxon EC motor and a freely programmable digital positioning control unit EPOS with field-bus connections CAN and RS232. The standalone version of MCD EPOS can autonomously control single and multiple ...
The LR80 is a compact, high torque, direct-drive ...
Description:
The LR80 is a compact, high torque, direct-drive piezoelectric rotary motor for friction drive without backlash.Lack of gear-heads reduces the overall size so that LR80 often fits where other motors will not. In place, it delivers up to 80 mNm ...
The APM10 is a monitor- and protection unit ...
Description:
The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogue process signal for use in PLC's and other controllers. Transmitter for kW, 3 phase symmetrical loadFor connecting to a 3 phase net of ...