DC Motors

DC motors are the most widely used type of motor with initial costs typically less than AC systems for low-power units. DC motors can be used for a wide range of applications from small tools and appliances, through to electric vehicles, lifts and hoists. For more about DC motors.

DC Motors speed can be controlled by varying the supply voltage and are available in a wide range of voltages, however the most popular type are 12 V and 24 V, with some of the advantages being:


  • Easy installation
  • Speed control over a wide range
  • Quick Starting, Stopping, Reversing and Acceleration
  • High Starting Torque
  • Linear speed-torque curve


Types of DC Motors


There are two common types of DC motor, brushless and brushed. In both brushless and brushed motors, magnets drive the spinning (rotary) motion of the motor shaft.

  • Brushed Motors These are a more traditional type of motor and are typically used in cost-sensitive applications, where control systems are relatively simple, such as in consumer applications and more basic industrial equipment.
  • Brushless Motors Brushless motors alleviate some of the issues associated with brushed motors such as short life span for high use applications and are mechanically much simpler in design (not having brushes). The advantages of brushless motors are longer life, little maintenance and high efficiency (85-90%). These types of motors are generally used in speed and positional control with applications such as fans, pumps and air compressors, where reliability and ruggedness are required.


 Applications

DC Motors can be used in applications such as conveyor belts and turntables, or in industrial machines where constant ar low-speed torque is needed.


...
Lees meer Lees minder

Filters

1 - 20 van 41 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Supply Voltage DC Motor Type Power Rating Output Speed Shaft Diameter Maximum Output Torque Gearhead Type Length Gear Ratio Dimensions Current Rating Width Depth Core Construction
RS-stocknr. 380-8633
FabrikantDOGA
€ 164,47
Each
Aantal stuks
12 V dc Geared 20 W 40 rpm - 5 Nm Worm 178mm - 178 x 60 x 100.6 mm 5 A 60mm 100.6mm -
RS-stocknr. 380-8649
Fabrikantnummer111.3761.30.00E
FabrikantDOGA
€ 172,95
Each
Aantal stuks
24 V dc Brushed Geared 20 W 40 rpm 9mm 5 Nm Worm 178mm - 178 x 60 x 100.6 mm 2.5 A 60mm 100.6mm -
RS-stocknr. 773-6784
Fabrikantnummer111.9199.20.00
FabrikantDOGA
€ 173,20
Each
Aantal stuks
12 V Brushed Geared - 100 rpm 10mm 3 Nm, 20 Nm Worm 178mm - 178 x 60 x 100.6 mm 6 A, 48 A 60mm 100.6mm Iron Core
RS-stocknr. 773-6790
Fabrikantnummer316.9731.30.00
FabrikantDOGA
€ 134,30
Each
Aantal stuks
24 V dc Brushed Geared - 65 rpm 9mm 1.5 Nm, 10 Nm Worm 177.5mm - 177.5 x 48 x 88.8 mm 3 A, 11 A 48mm 88.8mm Iron Core
RS-stocknr. 773-6787
Fabrikantnummer111.9199.30.00
FabrikantDOGA
€ 181,87
Each
Aantal stuks
24 V dc Brushed Geared - 100 rpm 10mm 3 Nm, 20 Nm Worm 178mm - 178 x 60 x 100.6 mm 3 A, 24 A 60mm 100.6mm Iron Core
RS-stocknr. 773-6771
Fabrikantnummer111.9031.20.00
FabrikantDOGA
€ 165,02
Each
Aantal stuks
12 V dc Brushed Geared - 70 rpm 9mm 3 Nm, 25 Nm Worm 178mm - 178 x 60 x 100.6 mm 6 A, 34 A 60mm 100.6mm Iron Core
RS-stocknr. 773-6775
Fabrikantnummer111.9031.30.00
FabrikantDOGA
€ 173,23
Each
Aantal stuks
24 V dc Brushed Geared - 70 rpm 9mm 3 Nm, 25 Nm Worm 178mm - 178 x 60 x 100.6 mm 3 A, 17 A 60mm 100.6mm Iron Core
RS-stocknr. 849-6263
Fabrikantnummer321.1000.3B.00
FabrikantDOGA
€ 507,72
Each
Aantal stuks
24 V - 500 W 2700 rpm - 1.9 Nm - - - - 27 A - - -
RS-stocknr. 668-5521
Fabrikantnummer111.3763.30.00E
FabrikantDOGA
€ 223,16
Each
Aantal stuks
24 V dc Geared 16 W 25 rpm - 6 Nm Worm 178mm - 178 x 60 x 100.6 mm 2 A 60mm 100.6mm -
RS-stocknr. 380-8655
FabrikantDOGA
€ 273,53
Each
Aantal stuks
24 V dc Brushed Geared 38 W 240 rpm - 1.5 Nm Worm 166mm - - 4 A 60mm - -
RS-stocknr. 773-6793
Fabrikantnummer319.4846.20.00
FabrikantDOGA
€ 345,60
Each
Aantal stuks
12 V Brushed Geared - 100 rpm 12mm 4 Nm, 40 Nm Worm 206.5mm - 206.5 x 60 x 122.7 mm 6 A, 60 A 60mm 122.7mm Iron Core
RS-stocknr. 773-6781
Fabrikantnummer316.9731.20.00
FabrikantDOGA
€ 120,94
Each
Aantal stuks
12 V dc Brushed Geared - 65 rpm 9mm 1.5 Nm Worm 177.5mm - 177.5 x 48 x 88.8 mm 6 A, 22 A 48mm 88.8mm Iron Core
RS-stocknr. 849-6241
Fabrikantnummer162.4101.30.00
FabrikantDOGA
€ 120,74
Each
Aantal stuks
24 V - 63 W 3000 rpm - 0.2 Nm - 118.5mm - 60 (Dia.) x 118.5 mm 4 A 60 (Dia.)mm - -
RS-stocknr. 849-6250
Fabrikantnummer269.4102.2B.00
FabrikantDOGA
€ 240,40
Each
Aantal stuks
12 V - 236 W 3000 rpm - 0.5 Nm - - - - 20 A - - -
RS-stocknr. 668-5534
Fabrikantnummer258.1710.30.00
FabrikantDOGA
€ 360,11
Each
Aantal stuks
24 V dc Brushed Geared 40 W 25 rpm 14mm 80 Nm Worm 235.8mm - 235.8 x 79 x 131.3 mm 5 A 79mm 131.3mm -
RS-stocknr. 380-8661
FabrikantDOGA
€ 137,28
Each
Aantal stuks
12 V dc Brushed Geared 8 W 40 rpm 9mm 2 Nm Worm 177.5mm - - 3.4 A, 12 A 48mm 88.8mm -
RS-stocknr. 849-6244
Fabrikantnummer162.4116.3B.00
FabrikantDOGA
€ 95,19
Each
Aantal stuks
24 V - 63 W 3000 rpm - 0.2 Nm - 118.5mm - 60 (Dia.) x 118.5 mm 4 A 60 (Dia.)mm - -
RS-stocknr. 668-5528
Fabrikantnummer111.3763.20.00E
FabrikantDOGA
€ 213,80
Each
Aantal stuks
12 V dc Brushed Geared 16 W 25 rpm 9mm 6 Nm Worm 178mm - 178 x 60 x 100.6 mm 4 A 60mm 100.6mm Iron Core
RS-stocknr. 380-8683
FabrikantDOGA
€ 143,44
Each
Aantal stuks
24 V dc Brushed Geared 8 W 40 rpm 9mm 2 Nm Worm 177.5mm - - 1.7 A, 6 A 48mm 88.8mm -
RS-stocknr. 668-5531
Fabrikantnummer259.3710.30.00
FabrikantDOGA
€ 526,66
Each
Aantal stuks
24 V dc Brushed Geared 46 W 22 rpm 14mm 20 Nm Worm 275mm - 275 x 95 x 162.5 mm 6 A 95mm 162.5mm -