Hinge Switches

Hinge switches are a type of safety interlock switch fitted at the hinge point of a piece of equipment, such as a door. They work according to the normal function of the hinge, but they are linked up to the power supply and will break the circuit if the door is opened at an inappropriate time. Hinge switches are used to replace traditional door contacts, because they improve safety while still maintaining the same level of operation.

What are hinge switches used for?

Hinge switches are used to prevent tampering with equipment and to protect personnel. They monitor people entering hazardous areas. When somebody attempts to open a protected door, the hinge switch will disconnect the power to the equipment inside, so that nobody gets hurt and the machinery cannot be damaged.

Types of hinge switches

Different hinge switches are designed for use with different pieces of equipment, so they may differ in size and capacity. The trigger angle range can differ substantially, as well as the maximum current and voltage they can be used with. Some hinge switches can be load-bearing, while others are not.


...
Lees meer Lees minder

Filters

41 - 60 van 62 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Range Series Lock Style Normal State Configuration Maximum Current Maximum AC Voltage Maximum DC Voltage Number of Cable Entries Size of Cable Entries Conduit Entry Shaft Length Trigger Angle Range Minimum Operating Temperature Maximum Operating Temperature
RS-stocknr. 873-2196
Fabrikantnummer440H-E22027
€ 36,70
Each
Aantal stuks
Ensign 3 440H Hinge NO (Auxiliary), 2NC (Safety) 6 A 600V 24V - - M16 80mm 5 → 14° -20°C +80°C
RS-stocknr. 305-2004
FabrikantnummerXCSPL561
€ 46,20
Each
Aantal stuks
Preventa XCS Hinge NO/NC 6 A 240V 250V 1 PG11 PG11 72.5mm -25°C +70°C
RS-stocknr. 227-961
Fabrikantnummer3SE5232-0HU22
FabrikantSiemens
€ 40,41
Each
Aantal stuks
SIRIUS 3SE5 Hinge NO/NC 1 (dc) A, 4.2 (ac) A 240V 24V 2 M20 x 1.5 M20 52.8mm - -25°C +65°C
RS-stocknr. 744-8698
Fabrikantnummer570270
FabrikantPilz
€ 131,08
Each
Aantal stuks
PSEN PSENhinge Hinge 2NC - - - - M12 M12 - - -25°C +70°C
RS-stocknr. 691-8190
Fabrikantnummer3SE5112-0LU22
FabrikantSiemens
€ 61,65
Each
Aantal stuks
SIRIUS 3SE5 Hinge 2NO/NC 6 A 400V 230V 1 M20 x 1.5 M20 50mm - -25°C +85°C
RS-stocknr. 360-4403
FabrikantnummerXCSPR752
€ 48,80
Each
Aantal stuks
Preventa XCS Hinge 2NC 6 A 240V 250V 1 M16 x 1.5 M16 30mm -25°C +70°C
RS-stocknr. 193-5799
FabrikantnummerT5C 236-11Z
FabrikantSchmersal
€ 56,05
Each
Aantal stuks
- TC 236 Hinge NO/NC 4 A 230V 24V 1 M20 x 1.5 M20 70mm 12.5° -30°C +80°C
RS-stocknr. 201-3581
FabrikantnummerTV10S-335-11Z
FabrikantSchmersal
€ 74,29
Each
Aantal stuks
- TVS 335 Hinge NO/NC 4 A 230V 24V 1 M20 x 1.5 M20 24mm -25°C +70°C
RS-stocknr. 360-4374
FabrikantnummerXCSPR551
€ 48,80
Each
Aantal stuks
Preventa XCS Hinge NO/NC 6 A 240V 250V 1 PG11 PG11 30mm -25°C +70°C
RS-stocknr. 360-4447
FabrikantnummerXCSTR752
€ 55,70
Each
Aantal stuks
Preventa XCS Hinge NO/2NC 6 A 240V 250V 2 M16 x 11 M16 30mm -25°C +70°C
RS-stocknr. 691-8196
Fabrikantnummer3SE5112-0LU21
FabrikantSiemens
€ 53,28
Each
Aantal stuks
SIRIUS 3SE5 Hinge NO/2NC 6 A 400V 230V 1 M20 x 1.5 M20 19.3mm - -25°C +85°C
RS-stocknr. 607-8380
FabrikantnummerSHS3-U15Z-KA
FabrikantBernstein AG
€ 151,11
Each
Aantal stuks
- SHS Hinge NO/2NC 3 A 230V 24V - - - - - -25°C +70°C
RS-stocknr. 305-2010
FabrikantnummerXCSTL561
€ 55,00
Each
Aantal stuks
Preventa XCS Hinge 2NO/NC 6 A 240V 250V 2 M16 x 11 M16 72.5mm -25°C +70°C
RS-stocknr. 623-3284
FabrikantnummerTVS 410ST1-11/11U
FabrikantSchmersal
€ 137,43
Each
Aantal stuks
- TVS 410 Hinge 2NO/2NC 4 A 230V 24V - M12 M12 - -25°C +65°C
RS-stocknr. 764-4174
Fabrikantnummer3SE5232-0HU22
FabrikantSiemens
€ 46,82
Each
Aantal stuks
SIRIUS 3SE5 Hinge NO/NC 3 A dc, 6 A ac 400V 230V 1 M20 x 1.5 M20 - 10° -25°C +85°C
Nieuw
RS-stocknr. 189-5325
Fabrikantnummer6019390025
FabrikantBernstein AG
€ 143,19
Each
Aantal stuks
- SHS3 Hinge 2NC/NO 5 A 230V 24V 1 - - - ±3° -25°C +70°C
RS-stocknr. 136-3215
Fabrikantnummer6186800324
FabrikantBernstein AG
€ 49,54
Each
Aantal stuks
- I88 - 2NC 5 A 240V - 1 M20 x 1.5 M3 - ±3.5° -30°C +80°C
RS-stocknr. 528-0740
Fabrikantnummer3SE2283-0GA43
FabrikantSiemens
€ 194,40
Each
Aantal stuks
SIRIUS 3SE2 - NO/2NC - - - - M20 x 1.5 M20 - - -30°C +85°C
RS-stocknr. 764-4165
Fabrikantnummer3SE5232-0HU21
FabrikantSiemens
€ 46,82
Each
Aantal stuks
SIRIUS 3SE5 Hinge NO/NC 3 A dc, 6 A ac 400V 400V 1 M20 x 1.5 M20 - 10° -25°C +85°C
RS-stocknr. 814-7037
FabrikantnummerXCSPR553
€ 51,20
Each
Aantal stuks
Preventa XCS Spindle NO/NC 6 A 240V 250V 1 1/2 in NPT - 30mm -25°C +70°C
Related Products
Ideal for light industrial machines fitted with hinged ...
Description:
Ideal for light industrial machines fitted with hinged or rotary protective covers with small opening radius e.g. double gate guards3 outputs5° displaced tripping angle4 position turret headIngress protection; IP67Slow break safety contacts with positive opening operations (positive actuation) N/C contacts ...
Hinge switch for right-side mountingPivot angle 0° → ...
Description:
Hinge switch for right-side mountingPivot angle 0° → 270°Freely adjustable switch pointIntegrated fine adjustment system makes readjusting easy even after the switch point has been setSwitch point can be reset with a change kitWired or plugged connectionAxial or radial connection ...
Introducing the XCS PL range of Safety Switches.As ...
Description:
Introducing the XCS PL range of Safety Switches.As far as safety is involved all dangerous machines in all sectors are involved. Such as packaging, handling, robotics, machine tools, presses and the automotive sector.Increase productivity thanks to the third contact dedicated ...
Introducing the XCS PL series. Ideal for light ...
Description:
Introducing the XCS PL series. Ideal for light industrial machines fitted with hinged or rotary protective covers with small opening radius e.g. double gate guards2 outputs5° displaced tripping angle4 position turret headIngress protection; IP67Slow break safety contacts with positive opening ...