Pressure Switches

Pressure switches work by forming an electrical contact when its input is subjected to a certain amount of fluid or air pressure.

How They Work
Pressure switches can activate with either rising or falling fluid pressure, so are essential components in any pressurized fluid system where automatic supervision is required.

Uses for pressure switches
Pressure switches are used in a variety of systems. For example, a pneumatic pressure switch would be used to automatically switch off an electric air compressor when the desired pressure had been achieved in, for instance, a car tire. Hydraulic pressure switches have a number of applications in the automotive industry, such as measuring oil levels.

Media
The RS Range of Pressure Switches can accommodate the measuring of a variety of media, such as air and gas for pneumatic applications, and everything from oil to sea water in fluid applications.

Pressure Switch Types
There are four key variations of pressure switch available in the RS range.
• Relative or Gauge Pressure Switches are calibrated for a variety of different purposes, and measure pressure relative to a given value.
• Differential Pressure Switches are commonly used for sensing a difference in pressure between two points in a system
• Vacuum Pressure Switches provide electrical feedback to measure a rise or fall of pressure in a system.

...
Lees meer Lees minder

Filters

301 - 302 van 302 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Pressure Range Pressure Reading Type Media Measured Output Type Supply Voltage Minimum Pressure Reading Maximum Pressure Reading Process Connection Analogue Output Electrical Connection Minimum Operating Temperature Maximum Operating Temperature Accuracy Response Time
RS-stocknr. 176-7848
FabrikantnummerXMLP010BC270
€ 130,29
Each
Aantal stuks
0 → 10bar - Air, Fresh Water, Gas, Hydraulic Oil, Refrigeration Fluid Analogue 12 → 24 V dc 0bar 10bar 7/16 - 20 UNF SAE 4 → 20 mA EN 175301-803-A 3 Pin Male Connector -30°C +85°C 0.1 %, ±0.5 (Measurement) % 2 ms
RS-stocknr. 779-4229
FabrikantnummerPS61-60-4MGZ-A-SP
FabrikantGems Sensors
€ 34,85
Each
Aantal stuks
400 → 1100psi - Hydraulic SPST-NO 42 V dc 400psi 1100psi BSP 1/4 - Spade Terminal -9°C +110°C - -
Related Products
These compact pressure switches are designed for OEM ...
Description:
These compact pressure switches are designed for OEM applications. They are equipped with high proof pressure capabilities for demanding hydraulic applications such as forklifts, scissor lifts, and off road equipment. Ranges varying from 15 to 3000 psi (1 to 207 ...
These compact pressure switches are designed for OEM ...
Description:
These compact pressure switches are designed for OEM applications. They are equipped with high proof pressure capabilities for demanding hydraulic applications such as forklifts, scissor lifts, and off road equipment. Ranges varying from 15 to 3000 psi (1 to 207 ...
The 9012G single stage pressure switches are control ...
Description:
The 9012G single stage pressure switches are control circuit rated devices. This series of switches can be used in pneumatic and hydraulic systems and on a variety of machine and process applications to protect the equipment. These pressure switches can ...
Schneider Electric XMLG pressure transmitters and pressure switches ...
Description:
Schneider Electric XMLG pressure transmitters and pressure switches feature a ceramic pressure measuring cell. The deformation caused by the pressure is transmitted to the resistors of a Wheatstone bridge silk-screened on the ceramic. The change in resistance is then processed ...