Battery Holders & Mounts

What is it?
A battery holder is a cavity or compartment used to house one or more batteries in a piece of equipment safely. The battery holder has flat metal or spring coiled contacts that press against the battery terminals making an electrical contact.
What does it do?
A battery holder provides a convenient method of containing the cells neatly in a casing. The holder or mount is moulded into the shape of the battery it houses.
Types
Battery holders are available in various shapes, styles and materials. The main ones are:
Chassis mount
Chassis mount battery holders can be made of metal or plastic. They are fixed to a panel, chassis or plate via fixing holes in the back of the casing base or by tabs at the side. The holders can be open faced or enclosed. Chassis mount holders and mounts accept AA, AAA, C, D AA and 9 V PP3 cell sizes.
Panel mount
Panel mount battery holders are made of plastic. They are designed to slot into a pre-prepared hole in a panel. There are two main fixing methods,
• Flange panel fixing
Secured to the panel via a flange with pre-drilled holes. These holders are draw style holders with a flip front or pull out draw compartment. They hold single larger cells like 9 V PP3 or multiple 2, 3 and 4 cylindrical AAA, AA, C and D cells.
• Screw fixing
Secured to the panel with screw thread gasket and nut. These holders are long cylindrical holders with a cap. The cap can be finger operated or slotted cap (for screwdriver release).
PCB Mount
PCB mount battery holders can be made of metal or plastic. They are designed to mount directly on to a printed circuit board. The holders have sharp pins protruding from the base of the holder. Pins are pushed through the holes on a PCB board and soldered. These battery mounts are usually open faced. PCB holders can hold single coin cells or multiple 2, 3 and 4 cylindrical AAA, AA, C, D cells
Strap and lead
Strap and lead types are a battery connector rather than a holder or mount. They are two press studs fixed into a plastic flat base. The base has two short lengths of flexible wire with tinned ends for connection. Strap and lead styles are used with 9 V PP3 cells.

...
Lees meer Lees minder

Filters

1 - 20 van 192 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs For Battery Size Number of Cells Mount Type Maximum Cell Diameter Dimensions Terminal Contact Type Body Material Lead Length Mounting Flange Dimensions Terminal Contact Material
RS-stocknr. 489-021
FabrikantRS PRO
€ 0,484
Each (In a Pack of 5)
Aantal stuks
9V PP3 1 Wire Lead Strap & Lead - 27 x 13 x 80mm Press Stud PP - - -
RS-stocknr. 489-021A
FabrikantRS PRO
€ 0,231
Each (In a Pack of 100)
Aantal stuks
9V PP3 1 Strap & Lead Strap & Lead - 27 x 13 x 80mm Press Stud PP - - -
RS-stocknr. 410-1444
Fabrikantnummer2487
FabrikantKeystone
€ 1,697
Each (In a Pack of 3)
Aantal stuks
AA 3 (AA) Chassis Battery Holder - 68.5 x 48 x 18.5mm Coil Spring ABS 152.4mm - Spring Steel
RS-stocknr. 219-7960
Fabrikantnummer3003
FabrikantKeystone
€ 0,874
Each (In a Pack of 5)
Aantal stuks
CR2016, CR2025, CR2032 1 PCB Contact 20mm 19.9 x 21.1 x 6.7mm Top Spring Arm - - - Phosphor Bronze
RS-stocknr. 611-9598
FabrikantRS PRO
€ 2,04
Each
Aantal stuks
AA 2 PCB Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PP - - Nickel Plated Steel
RS-stocknr. 611-9576
FabrikantRS PRO
€ 1,78
Each
Aantal stuks
AA 1 PCB Battery Holder - 57.2 x 16.4 x 14.8mm Coil Spring PP - - Nickel Plated Steel
RS-stocknr. 594-628
FabrikantRS PRO
€ 0,97
Each
Aantal stuks
AA 4 Chassis Battery Holder - 57 x 30 x 30mm Coil Spring PP - - -
RS-stocknr. 172-4325
Fabrikantnummer1028
FabrikantKeystone
€ 2,86
Each
Aantal stuks
AA 1 (AA) PCB Battery Holder - 59.9 x 16.3 x 15.2mm Leaf Spring PBT - - Stainless Steel
RS-stocknr. 219-7954
Fabrikantnummer3002
FabrikantKeystone
€ 0,654
Each (In a Pack of 5)
Aantal stuks
CR2016, CR2025, CR2032 1 PCB Contact 20mm - Top Spring Arm - - - Phosphor Bronze
RS-stocknr. 279-4965
Fabrikantnummer2468
FabrikantKeystone
€ 1,58
Each
Aantal stuks
AAA 2 PCB Battery Holder - 53 x 24.6 x 13mm Coil Spring PP - - Nickel Plated Spring Steel
RS-stocknr. 109-4719
Fabrikantnummer204
FabrikantKeystone
€ 0,279
Each (In a Pack of 10)
Aantal stuks
A23, A27, AAA, N 1 Snap-In Contact - 6.4 x 9.1mm Leaf Spring - - - Spring Steel
RS-stocknr. 410-1450
Fabrikantnummer2490
FabrikantKeystone
€ 3,98
1 Pack of 3
Pack(s)
AA 2 (AA) Chassis Battery Holder - 68.3 x 35.4 x 18mm Coil Spring ABS 152.4mm - Spring Steel
RS-stocknr. 367-4222
Fabrikantnummer1060
FabrikantKeystone
€ 2,00
Each
Aantal stuks
CR2025 1 PCB Battery Holder 20mm 28.4 x 16 x 5.5mm Top Spring Arm Glass Filled LCP - - Phosphor Bronze
RS-stocknr. 512-3580
FabrikantRS PRO
€ 0,71
Each
Aantal stuks
AA 2 Chassis Battery Holder - 57.6 x 31.2 x 15mm Coil Spring PE - - -
RS-stocknr. 279-5457
Fabrikantnummer84-6
FabrikantKeystone
€ 4,10
1 Bag of 5
Bag(s)
9V PP3 1 Strap & Lead Strap & Lead - 13 x 8.5 x 25mm Press Stud ABS 152.4mm - Brass
RS-stocknr. 614-2374
Fabrikantnummer2481
FabrikantKeystone
€ 2,43
Each
Aantal stuks
AAA 4 PCB Battery Holder - 53 x 50.3 x 13mm Coil Spring PP - - Spring Steel
RS-stocknr. 481-4077
Fabrikantnummer2464RB
FabrikantKeystone
€ 2,57
Each
Aantal stuks
AA 3 PCB Battery Holder - 58 x 48.3 x 17mm Coil Spring PP - - Spring Steel
RS-stocknr. 219-7926
Fabrikantnummer3000
FabrikantKeystone
€ 0,684
Each (In a Pack of 5)
Aantal stuks
CR1216, CR1220 1 PCB Contact 12mm - Top Spring Arm - - - Phosphor Bronze
RS-stocknr. 172-5845
Fabrikantnummer1294
FabrikantKeystone
€ 3,48
Each
Aantal stuks
9V PP3 1 PCB Battery Holder - 53.9 x 29.6 x 20.3mm Solder Tag Glass Filled Nylon - 23.8 x 37.4mm Steel
RS-stocknr. 279-4959
Fabrikantnummer2466
FabrikantKeystone
€ 1,09
Each
Aantal stuks
AAA 1 PCB Battery Holder - 50 x 13 x 12.7mm Coil Spring PP - - Spring Steel
Related Products
Single cell PCB mounting battery holders20A nickel silver ...
Description:
Single cell PCB mounting battery holders20A nickel silver rated contacts (spring steel for 1/2 AA) solder tags, 5A PCB pinsPins can be cropped and the 110 connectors on the top can be usedInterconnecting lugs allow multiple assemblies.
Panel mounting cylindrical battery holders for standard cell ...
Description:
Panel mounting cylindrical battery holders for standard cell sizesQuick and easy replacement of batteriesAll holders are moulded in black plasticBayonet fixing front cap with a coin slot for easy removalA supplementary rear support tag should be used on dual cell ...
Battery holders correspond to the models with solder ...
Description:
Battery holders correspond to the models with solder lugs in terms of design and dimensionsFeature solder pins for the printed circuit board.
Intended mainly to hold lithium batteries used for ...
Description:
Intended mainly to hold lithium batteries used for memory back-up."Snap-in" type contacts make it easy to hold during wave soldering.Identification of polarity and locating pin for direction of fitting.Low profile for space saving.Option of adding a side cover 1029C or ...