Cable Tray Accessories

Cable trays are components used in the wiring of buildings to support insulated cables. They offer an alternative to open wiring or electrical conduit systems and are necessary for cable management in commercial and industrial construction. Cable tray accessories are the fittings and add-ons accompanying cable tray components.


What are cable tray accessories used for?

A functional tray system consists of various clamping, supporting and splicing accessories. Other add-ons include plastic nuts, bolts, swift clips, wire baskets, couplers, tees, crosses and brackets. These fittings are used in conjunction with cable trays to support cables in ventilation holes, assist with directional change of piping systems, and cable channelling around obstacles.


Types of cable tray accessories 

The type of table tray used determines which cable tray accessories are needed.

  • Solid-bottom trays provides maximum cable protection. Cutters are required to make enter and exit openings.
  • Ventilated trays have openings in the bottom, but may need slots or holes to be punched into the tray for smaller cables. 
  • Ladder trays have support the cables with a traverse bar and require solid cover fittings to protect cables from dust, water and falling objects.

...
Lees meer Lees minder

Filters

101 - 102 van 102 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Accessory Type Material Corrosion Protection Type Depth Duty Type For Use With Series Standards Met Tray and Basket Type Width
RS-stocknr. 125-1628
€ 15,286
Each (In a Pack of 8)
Aantal stuks
Cover PVC - 3m - PVC Cable Tray PCT EN 61537 Cable Tray 75 mm
RS-stocknr. 163-3083
FabrikantnummerLTH50G
FabrikantLegrand
€ 3,02
Each
Aantal stuks
Trapeze Hanger Hot Dip Galvanised Steel - - Heavy Duty, Light Duty, Medium Duty M10 Threaded Rod LTH - Cable Tray 50 mm
Related Products
The Cablofil International compact cantilever arm cable tray ...
Description:
The Cablofil International compact cantilever arm cable tray is a universal mounting arm from the CM series. It is made of 316 stainless steel material. This arm is compact, easy to use. • Medium duty• Provides corrosion protection• Support steel ...
The Cablofil International cable tray is a bend ...
Description:
The Cablofil International cable tray is a bend connector from the CM series. It used in pairs on side rails for steel cable tray. Quick and easy to use, the connectors are plated with ecologic zinc. • Easy to mount• ...
Cantilever arms enable horizontal runs of cable tray ...
Description:
Cantilever arms enable horizontal runs of cable tray to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel They are available in ten sizes to accommodate all tray widths Cantilever arms are of fabricated construction with ...
There are three alternative methods of fitting trapeze ...
Description:
There are three alternative methods of fitting trapeze hangers to threaded rods as shown below. All three methods are applicable to trapeze hangers for 600-900 mm widths.