Rack Rails

Rack rails, sometimes called rack strips, are pieces of hardware used to mount equipment and accessories within server cabinets (also called 19-inch racks). Server rails are essential for mounting your server and holding it in position within the rack, whilst providing accessibility for maintenance.
Rack rails are usually supplied in pairs as two rails are needed to mount each piece of network hardware. Rack rails have a strong, robust construction and are typically made from steel or aluminium. The rails can be specifically designed for the rack or equipment that you are using, while others are for universal use.

There are two common types of rack rail:
Sliding rails are telescopic and allow you to extend your server system out of its rack, similar to a cupboard or drawer in a house.
Static rails, also called fixed rack rails, remain within the server cabinet and do not extend like the sliding rails. However, there is often more flexibility in design with this style.

Features & Benefits

Easier access and maintenance to hardware and equipment
Rack rails promote airflow around the server and prevent hardware from overheating.
Some offer installation and support without the need for tools – really quick and easy to install
Adjustable depth configurations
Some offer space where you can integrate something else, such as a keyboard, without taking up any additional space
Types of slides
Sliding rack rails come with different methods for extension:

Ball Slides: Ball bearing slides are the most common type of linear slide. They use ball bearings for a smooth and precise movement along a single-axis linear design. Usually constructed from aluminium or galvanised steel, they typically have two rows of ball bearings supported by four rods on either side of the base.
Roller Slides:Roller slides have a criss-cross design to support heavier loads and allow for a smooth controlled motion. Roller slides tend to be made from aluminium with the rollers constructed from durable steel to ensure the cylindrical bearings can roll efficiently and in a linear motion.
Fitting a Rack Rail:
Rack rails are installed into server racks or cabinets usually by screwing into place. The rails come with the relevant holes to allow for the screws to attach to the racking. For sliding rack rails, the fixed part is attached to the rack or cabinet, and the telescopic section can then move freely.

...
Lees meer Lees minder

Filters

61 - 80 van 142 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Type Maximum Load Material Depth Width Height Slide Length Closed Extension Hold-In Detent Lockout Rack Units Horizontal Pitch Colour Series
RS-stocknr. 876-5916
FabrikantnummerDA4160-0090-RS
FabrikantAccuride
€ 565,40
1 Pair
Pair(s)
- 250kg Aluminium - 26.5, 26.5 mm 80mm 900mm 100% - - - - - DA4160
RS-stocknr. 261-7486
FabrikantnummerDZ0204-0020
FabrikantAccuride
€ 48,63
1 Pair
Pair(s)
Telescopic Slide 50kg Steel 381mm 9.5mm 35.3mm 508mm 75% - Yes - - - DZ0204
RS-stocknr. 876-5950
FabrikantnummerDZ2431-0035-RS
FabrikantAccuride
€ 30,31
1 Pair
Pair(s)
Telescopic Rail 20kg Steel - 16mm 20mm 350mm 100% - - - - - DZ2431
RS-stocknr. 187-9212
Fabrikantnummer8619440
FabrikantRittal
€ 34,10
Each (In a Pack of 2)
Aantal stuks
- - Steel - 1.154m - - - - - - - - -
RS-stocknr. 310-4981
FabrikantnummerDZ3307-0018
FabrikantAccuride
€ 77,26
1 Pair
Pair(s)
Telescopic Slide 66kg Steel 483mm 12.7mm 50.8mm 457mm 100+% - Yes - - - DZ3307
RS-stocknr. 261-7521
FabrikantnummerDZ0305-0018
FabrikantAccuride
€ 118,10
1 Pair
Pair(s)
Telescopic Slide 70kg Steel 479mm 19.1mm 35.3mm 457mm 100+% - Yes - - - DZ0305
RS-stocknr. 190-4158
FabrikantnummerDZ2807-0026
FabrikantAccuride
€ 60,30
1 Pair
Pair(s)
- 29kg - 27mm 1.371m 17mm 660mm 100% - Yes 1U, 2U - - DZ2807
RS-stocknr. 261-7470
FabrikantnummerDZ0204-0018
FabrikantAccuride
€ 62,37
1 Pair
Pair(s)
Telescopic Slide 55kg Steel 329mm 9.5mm 35.3mm 457mm 75% - Yes - - - DZ0204
RS-stocknr. 367-8909
FabrikantnummerDZ3607-0016
FabrikantAccuride
€ 82,63
1 Pair
Pair(s)
Telescopic Slide 100kg Steel 406mm 19.1mm 53.1mm 406mm 100% Yes Yes - - - DZ3607
RS-stocknr. 261-7414
FabrikantnummerDZ0301-0020
FabrikantAccuride
€ 117,53
1 Pair
Pair(s)
Telescopic Slide 60kg Steel 530mm 19.1mm 35.3mm 508mm 100+% - - - - - DZ0301
RS-stocknr. 187-9277
Fabrikantnummer8619460
FabrikantRittal
€ 53,51
Each (In a Pack of 2)
Aantal stuks
- - Steel - 1.754m - - - - - - - - -
RS-stocknr. 876-5935
FabrikantnummerDZ5321-0055EC-RS
FabrikantAccuride
€ 90,25
1 Pair
Pair(s)
- 85kg Steel - 19.1, 19.1 mm 53mm 550mm 100% - - - - - DZ5321
RS-stocknr. 261-7357
FabrikantnummerDZ0201-0026
FabrikantAccuride
€ 54,71
1 Pair
Pair(s)
Telescopic Slide 30kg Steel 481mm 9.5mm 35.3mm 660mm 75% - - - - - DZ0201
RS-stocknr. 190-4154
FabrikantnummerDZ2807-0020
FabrikantAccuride
€ 55,50
1 Pair
Pair(s)
- 36kg - 27mm 1.067m 17mm 508mm 100% - Yes 1U, 2U - - DZ2807
RS-stocknr. 220-585
FabrikantnummerDZ0201-0024
FabrikantAccuride
€ 56,87
1 Pair
Pair(s)
Telescopic Slide 35kg Steel 429mm 9.5mm 35.3mm 610mm 75% - - - - - DZ0201
RS-stocknr. 153-3724
Fabrikantnummer7888612
FabrikantRittal
€ 31,55
1 Pair
Pair(s)
Brush Strip - Plastic - 800mm - - - - - - - Black -
RS-stocknr. 187-9215
Fabrikantnummer8619410
FabrikantRittal
€ 22,38
Each (In a Pack of 2)
Aantal stuks
- - Steel - 554mm - - - - - - - - -
RS-stocknr. 437-1918
Fabrikantnummer20822048
FabrikantSchroff
€ 27,29
1 Bag of 4
Bag(s)
Connector Bar - Aluminium, Clear Chromate Conversion Coating 427mm - - 431.8mm - - - - 84HP - -
RS-stocknr. 190-4150
FabrikantnummerDZ2807-0012
FabrikantAccuride
€ 49,10
1 Pair
Pair(s)
- 45kg - 27mm 661mm 17mm 305mm 100% - Yes 1U, 2U - - DZ2807
RS-stocknr. 220-591
FabrikantnummerDZ0301-0016
FabrikantAccuride
€ 101,89
1 Pair
Pair(s)
Telescopic Slide 65kg Steel 429mm 19.1mm 35.3mm 406mm 100+% - - - - - DZ0301
Related Products
A range of RS Pro flexible metric racks ...
Description:
A range of RS Pro flexible metric racks made from Duracon, aluminium fixing rails and clamping plates and screws (Sold Separately). These racks can be mounted directly onto the application surface or by using the aluminium fixing rails. • Racks ...
Strong steel construction, 35.3mm high, electro zinc plated ...
Description:
Strong steel construction, 35.3mm high, electro zinc plated and clear chromatePrecision high performance bearingsMounting brackets and fittings supplied separatelyRecommended fixings M4 cheese head screws (2.5mm high x 9.6mm diameter maximum) to DIN 85Front disconnect and lockout features available for Models ...
100% extension slide with lift off disconnectionLoad rating ...
Description:
100% extension slide with lift off disconnectionLoad rating 120kgDimensions: W 20.7mm, H 69mmHigh grade stainless steel construction (1.4301x5GN, 1810)Recommended screws: M4 cheese head DIN 85.
Suitable for all sub-racks and casesFor Euro-board format ...
Description:
Suitable for all sub-racks and casesFor Euro-board format board sizes - 100x160mm/100x220mm – 3USide panels have grooves for the insertion of boards into a standardised HP grid (guide rails not required)Rear panel closedFront panel 2.5mm aluminium front: anodised rear yellow ...