Rack Rails

Rack rails, sometimes called rack strips, are pieces of hardware used to mount equipment and accessories within server cabinets (also called 19-inch racks). Server rails are essential for mounting your server and holding it in position within the rack, whilst providing accessibility for maintenance.
Rack rails are usually supplied in pairs as two rails are needed to mount each piece of network hardware. Rack rails have a strong, robust construction and are typically made from steel or aluminium. The rails can be specifically designed for the rack or equipment that you are using, while others are for universal use.

There are two common types of rack rail:
Sliding rails are telescopic and allow you to extend your server system out of its rack, similar to a cupboard or drawer in a house.
Static rails, also called fixed rack rails, remain within the server cabinet and do not extend like the sliding rails. However, there is often more flexibility in design with this style.

Features & Benefits

Easier access and maintenance to hardware and equipment
Rack rails promote airflow around the server and prevent hardware from overheating.
Some offer installation and support without the need for tools – really quick and easy to install
Adjustable depth configurations
Some offer space where you can integrate something else, such as a keyboard, without taking up any additional space
Types of slides
Sliding rack rails come with different methods for extension:

Ball Slides: Ball bearing slides are the most common type of linear slide. They use ball bearings for a smooth and precise movement along a single-axis linear design. Usually constructed from aluminium or galvanised steel, they typically have two rows of ball bearings supported by four rods on either side of the base.
Roller Slides:Roller slides have a criss-cross design to support heavier loads and allow for a smooth controlled motion. Roller slides tend to be made from aluminium with the rollers constructed from durable steel to ensure the cylindrical bearings can roll efficiently and in a linear motion.
Fitting a Rack Rail:
Rack rails are installed into server racks or cabinets usually by screwing into place. The rails come with the relevant holes to allow for the screws to attach to the racking. For sliding rack rails, the fixed part is attached to the rack or cabinet, and the telescopic section can then move freely.

...
Lees meer Lees minder

Filters

81 - 100 van 142 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Type Maximum Load Material Depth Width Height Slide Length Closed Extension Hold-In Detent Lockout Rack Units Horizontal Pitch Colour Series
RS-stocknr. 876-5893
FabrikantnummerDZ9308-0032L-RS
FabrikantAccuride
€ 154,09
Each
Aantal stuks
- 218kg Steel - 19.1 mm, 19.1 76mm 812.8mm 100% - - - - - DZ9308
RS-stocknr. 876-5963
FabrikantnummerDB3832-0040EC-B-RS
FabrikantAccuride
€ 31,91
1 Pair
Pair(s)
- 44kg - - 12.7 mm, 12.7 46mm 400mm 100% - - - - - DB3832
RS-stocknr. 472-5450
FabrikantnummerDS5322-0055-2
FabrikantAccuride
€ 108,39
1 Pair
Pair(s)
Telescopic Slide 110kg Stainless Steel 592mm 20.70mm 53.1mm 550mm 100+% Yes - - - - DS5322
RS-stocknr. 367-8892
FabrikantnummerDZ3607-0014
FabrikantAccuride
€ 78,30
1 Pair
Pair(s)
Telescopic Slide 90kg Steel 356mm 19.1mm 53.1mm 356mm 100% Yes Yes - - - DZ3607
RS-stocknr. 207-872
FabrikantnummerCAXCSG345
FabrikantCAMDENBOSS
€ 26,91
1 Pair
Pair(s)
Support Guide - Dichromate, Steel 345mm 44.5mm 44.5mm 650mm - - - - - - -
RS-stocknr. 472-5444
FabrikantnummerDS5322-0040-2
FabrikantAccuride
€ 130,83
1 Pair
Pair(s)
Telescopic Slide 100kg Stainless Steel 442mm 20.70mm 53.1mm 400mm 100+% Yes - - - - DS5322
RS-stocknr. 310-5013
FabrikantnummerDZ3307-0024
FabrikantAccuride
€ 89,07
1 Pair
Pair(s)
Telescopic Slide 61kg Steel 635mm 12.7mm 50.8mm 610mm 100+% - Yes - - - DZ3307
RS-stocknr. 190-4160
FabrikantnummerDZ2807-0030
FabrikantAccuride
€ 63,50
1 Pair
Pair(s)
- 27kg - 27mm 1.575m 17mm 762mm 100% - Yes 1U, 2U - - DZ2807
RS-stocknr. 876-5926
FabrikantnummerDZ5321-0050EC-RS
FabrikantAccuride
€ 86,09
1 Pair
Pair(s)
- 70kg Steel - 19.1 mm, 19.1 53mm 500mm 100% - - - - - DZ5321
RS-stocknr. 261-7492
FabrikantnummerDZ0204-0022
FabrikantAccuride
€ 54,28
1 Pair of 1
Pair(s)
Telescopic Slide 40kg Steel 405mm 9.5mm 35.3mm 559mm 75% - Yes - - - DZ0204
RS-stocknr. 187-9250
Fabrikantnummer8617830
FabrikantRittal
€ 51,96
Each (In a Pack of 2)
Aantal stuks
Support Rail - Sheet Steel 26mm 48mm - - - - - - - - -
RS-stocknr. 261-7391
FabrikantnummerDZ0301-0014
FabrikantAccuride
€ 92,04
1 Pair of 1
Pair(s)
Telescopic Slide 67kg Steel 378mm 19.1mm 35.3mm 356mm 100+% - - - - - DZ0301
RS-stocknr. 227-1945
FabrikantnummerDZ2601-0050
FabrikantAccuride
€ 69,03
1 Pair
Pair(s)
Telescopic Slide 35kg Steel 505mm 12.7mm 26.3mm 500mm 100% Yes - - - - DZ2601
RS-stocknr. 187-9248
Fabrikantnummer8617820
FabrikantRittal
€ 43,85
Each (In a Pack of 2)
Aantal stuks
Support Rail - Sheet Steel 26mm 48mm - - - - - - - - -
RS-stocknr. 580-067
FabrikantnummerDZ0204-0024
FabrikantAccuride
€ 60,50
1 Pair
Pair(s)
Telescopic Slide 35kg Steel 432mm 9.5mm 35.3mm 610mm 75% - Yes - - - DZ0204
RS-stocknr. 187-9241
Fabrikantnummer8617710
FabrikantRittal
€ 8,113
Each (In a Pack of 4)
Aantal stuks
- - Sheet Steel 18mm 39mm - - - - - - - - -
RS-stocknr. 472-5220
FabrikantnummerDZ63450-4
FabrikantAccuride
€ 36,74
Each
Aantal stuks
Telescopic Slide Kit - - 220mm 15mm 57.2mm - - - - - - - DZ64020
RS-stocknr. 190-4157
FabrikantnummerDZ2807-0024
FabrikantAccuride
€ 58,70
1 Pair
Pair(s)
- 31kg - 27mm 1.27m 17mm 610mm 100% - Yes 1U, 2U - - DZ2807
RS-stocknr. 190-4151
FabrikantnummerDZ2807-0014
FabrikantAccuride
€ 50,70
1 Pair
Pair(s)
- 43kg - 27mm 762mm 17mm 356mm 100% - Yes 1U, 2U - - DZ2807
RS-stocknr. 472-5416
FabrikantnummerDZ3832-0035DO
FabrikantAccuride
€ 33,11
1 Pair
Pair(s)
Telescopic Slide 49kg Steel 356mm 12.7mm 45.7mm 350mm 100% Yes - - - - DZ3832
Related Products
A range of RS Pro flexible metric racks ...
Description:
A range of RS Pro flexible metric racks made from Duracon, aluminium fixing rails and clamping plates and screws (Sold Separately). These racks can be mounted directly onto the application surface or by using the aluminium fixing rails. • Racks ...
Strong steel construction, 35.3mm high, electro zinc plated ...
Description:
Strong steel construction, 35.3mm high, electro zinc plated and clear chromatePrecision high performance bearingsMounting brackets and fittings supplied separatelyRecommended fixings M4 cheese head screws (2.5mm high x 9.6mm diameter maximum) to DIN 85Front disconnect and lockout features available for Models ...
100% extension slide with lift off disconnectionLoad rating ...
Description:
100% extension slide with lift off disconnectionLoad rating 120kgDimensions: W 20.7mm, H 69mmHigh grade stainless steel construction (1.4301x5GN, 1810)Recommended screws: M4 cheese head DIN 85.
Suitable for all sub-racks and casesFor Euro-board format ...
Description:
Suitable for all sub-racks and casesFor Euro-board format board sizes - 100x160mm/100x220mm – 3USide panels have grooves for the insertion of boards into a standardised HP grid (guide rails not required)Rear panel closedFront panel 2.5mm aluminium front: anodised rear yellow ...