PCB Drill Bits

PCB drill bits are used with power tools to remove material and create holes. PCB drill bits come in many sizes and shapes and can create different kinds of holes in many different materials.


Why getting the right drill bit is important


Soft materials can usually be drilled safely with almost any bit. However, hard or brittle materials like glass and acrylic require specially designed PCB drill bits to produce accurate, clean holes. This is especially important when it comes to drilling holes in printed circuit boards because they're made of highly abrasive fibreglass. 


How to use your PCB drill bit to make the perfect hole


Virtually all PCB drill bits are designed to spin clockwise. While this isn't a problem on a drill press, many hand drivers are reversible; if your drill bit is spinning but not cutting, make sure it's going in the right direction. 


Before you start drilling be sure to fully tighten the bit in the drill. Then you can let the tool do most of the work and simply apply some steady pressure. 


...
Lees meer Lees minder

Filters

1 - 20 van 68 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Diameter Material
RS-stocknr. 457-645
FabrikantRS PRO
€ 29,40
1 Tube of 5
Tube(s)
0.6mm Carbide
RS-stocknr. 457-633
FabrikantRS PRO
€ 28,90
1 Tube of 5
Tube(s)
0.8mm Carbide
RS-stocknr. 457-582
FabrikantRS PRO
€ 6,22
Each
Aantal stuks
0.5mm Carbide
RS-stocknr. 457-655
FabrikantRS PRO
€ 29,40
1 Tube of 5
Tube(s)
1mm Carbide
RS-stocknr. 457-594
FabrikantRS PRO
€ 23,17
1 Tube of 5
Tube(s)
0.5mm Carbide
RS-stocknr. 457-649
FabrikantRS PRO
€ 29,40
1 Tube of 5
Tube(s)
0.7mm Carbide
RS-stocknr. 457-617
FabrikantRS PRO
€ 3,66
1 Tube of 5
Tube(s)
1mm Steel
RS-stocknr. 457-651
FabrikantRS PRO
€ 5,72
1 Tube of 5
Tube(s)
0.8mm Steel
RS-stocknr. 457-588
FabrikantRS PRO
€ 2,84
1 Tube of 5
Tube(s)
0.6mm Steel
RS-stocknr. 457-598
FabrikantRS PRO
€ 3,22
1 Tube of 5
Tube(s)
0.9mm Steel
RS-stocknr. 457-605
FabrikantRS PRO
€ 11,88
1 Tube of 5
Tube(s)
1.5mm Steel
RS-stocknr. 457-611
FabrikantRS PRO
€ 11,88
1 Tube of 5
Tube(s)
1.2mm Steel
RS-stocknr. 457-639
FabrikantRS PRO
€ 23,17
1 Tube of 5
Tube(s)
0.9mm Carbide
RS-stocknr. 457-661
FabrikantRS PRO
€ 29,36
1 Tube of 5
Tube(s)
1.5mm Carbide
RS-stocknr. 457-572
FabrikantRS PRO
€ 7,19
Each
Aantal stuks
0.8mm Carbide
RS-stocknr. 457-601
FabrikantRS PRO
€ 4,74
1 Tube of 5
Tube(s)
1.3mm Steel
RS-stocknr. 457-677
FabrikantRS PRO
€ 29,36
1 Tube of 5
Tube(s)
1.3mm Carbide
RS-stocknr. 457-673
FabrikantRS PRO
€ 23,84
1 Tube of 5
Tube(s)
1.2mm Carbide
RS-stocknr. 753-8678
FabrikantnummerDU80.10
FabrikantCIF
€ 2,842
Each (In a Box of 10)
Aantal stuks
2mm Carbide
RS-stocknr. 753-8631
FabrikantnummerDU80
FabrikantCIF
€ 4,73
Each
Aantal stuks
2mm Carbide
Related Products
All drill bits are suitable for use in ...
Description:
All drill bits are suitable for use in hammer drills. Drill with special cutting geometry and diamond-cut carbide tipMulti-purpose; suitable for virtually all materials, including stone, concrete, concrete, steel, but also porcelain, ceramic, glass, wood and PVCAsymmetric spiral design with ...
These HSS straight shank, right hand cutting long ...
Description:
These HSS straight shank, right hand cutting long series twist drills are capable of drilling up to 10x the drill diameter before the flute needs to be cleared, to avoid fouling. They are made to BS328/DIN340 RN and ISO standards, ...
This Metric Extra Length Twist Drill Bit from ...
Description:
This Metric Extra Length Twist Drill Bit from our own RS PRO brand is an industrial grade drill bit in super high speed HSS steel for accurate and easy drilling of all metals, special and hardened steels and alloys. • ...
HSCo drill for small diameter drilling in most ...
Description:
HSCo drill for small diameter drilling in most materials up to x2.5 diameterAll drills supplied on 1mm shankManufactured to DIN1899 Standards.