PCB Drill Bits

PCB drill bits are used with power tools to remove material and create holes. PCB drill bits come in many sizes and shapes and can create different kinds of holes in many different materials.


Why getting the right drill bit is important


Soft materials can usually be drilled safely with almost any bit. However, hard or brittle materials like glass and acrylic require specially designed PCB drill bits to produce accurate, clean holes. This is especially important when it comes to drilling holes in printed circuit boards because they're made of highly abrasive fibreglass. 


How to use your PCB drill bit to make the perfect hole


Virtually all PCB drill bits are designed to spin clockwise. While this isn't a problem on a drill press, many hand drivers are reversible; if your drill bit is spinning but not cutting, make sure it's going in the right direction. 


Before you start drilling be sure to fully tighten the bit in the drill. Then you can let the tool do most of the work and simply apply some steady pressure. 


...
Lees meer Lees minder

Filters

1 - 20 van 32 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Diameter Material
RS-stocknr. 753-8631
FabrikantnummerDU80
FabrikantCIF
€ 4,73
Each
Aantal stuks
2mm Carbide
RS-stocknr. 753-8678
FabrikantnummerDU80.10
FabrikantCIF
€ 2,842
Each (In a Box of 10)
Aantal stuks
2mm Carbide
RS-stocknr. 753-8606
FabrikantnummerDU68
FabrikantCIF
€ 4,54
Each
Aantal stuks
0.8mm Carbide
RS-stocknr. 753-8644
FabrikantnummerDU68.10
FabrikantCIF
€ 2,75
Each (In a Box of 10)
Aantal stuks
0.8mm Carbide
RS-stocknr. 753-8628
FabrikantnummerDU74
FabrikantCIF
€ 4,70
Each
Aantal stuks
1.4mm Carbide
RS-stocknr. 890-3632
FabrikantnummerDUFD5
FabrikantCIF
€ 8,14
Each
Aantal stuks
1.5mm Tungsten Carbide
RS-stocknr. 890-3648
FabrikantnummerDU5
FabrikantCIF
€ 14,15
Each
Aantal stuks
3mm Carbide
RS-stocknr. 753-8666
FabrikantnummerDU74.10
FabrikantCIF
€ 2,75
Each (In a Box of 10)
Aantal stuks
1.4mm Carbide
RS-stocknr. 753-8650
FabrikantnummerDU71.10
FabrikantCIF
€ 2,75
Each (In a Box of 10)
Aantal stuks
1.1mm Carbide
RS-stocknr. 890-3635
FabrikantnummerDU16
FabrikantCIF
€ 31,30
Each
Aantal stuks
2.4mm Tungsten Carbide
RS-stocknr. 753-8619
FabrikantnummerDU70
FabrikantCIF
€ 4,54
Each
Aantal stuks
1mm Carbide
RS-stocknr. 753-8593
FabrikantnummerDU66
FabrikantCIF
€ 4,54
Each
Aantal stuks
0.6mm Carbide
RS-stocknr. 753-8647
FabrikantnummerDU66.10
FabrikantCIF
€ 19,835
Each (In a Box of 10)
Aantal stuks
0.6mm Carbide
RS-stocknr. 753-8656
FabrikantnummerDU70.10
FabrikantCIF
€ 2,75
Each (In a Box of 10)
Aantal stuks
1mm Carbide
RS-stocknr. 753-8612
FabrikantnummerDU71
FabrikantCIF
€ 4,54
Each
Aantal stuks
1.1mm Carbide
RS-stocknr. 753-8638
FabrikantnummerDU91
FabrikantCIF
€ 4,65
Each
Aantal stuks
3.17mm Carbide
RS-stocknr. 753-8603
FabrikantnummerDU67
FabrikantCIF
€ 4,50
Each
Aantal stuks
0.7mm Carbide
RS-stocknr. 753-8672
FabrikantnummerDU85.10
FabrikantCIF
€ 2,842
Each (In a Box of 10)
Aantal stuks
2.5mm Carbide
RS-stocknr. 382-002
FabrikantnummerDW101010
FabrikantCIF
€ 30,32
Each
Aantal stuks
0.1mm Carbide
RS-stocknr. 753-8616
FabrikantnummerDU72
FabrikantCIF
€ 4,45
Each
Aantal stuks
1.2mm Carbide