Heatsink Mounting Accessories

Heatsink mounting accessories support the attachment of heatsinks to their components. Heatsinks are passive heat exchangers: they take the heat generated by electrical or mechanical devices and transfer it to a disposable medium, often liquid coolant or air. There's a wide selection of heatsink mounting accessories, including clips, adhesive tape, retaining springs, hi-flow insulators and graphite pads. Choosing the right mounting accessories can improve your heatsink’s performance.

Types of heatsink mounting accessories

A range of heatsink mounting accessories is available, depending on your needs. Spring clips can be used with all sizes of vertical-mount heatsinks where transistors have no mounting tabs. Heatsink spring mount rivets are used to fasten a heatsink to a processor on a printed circuit board. They provide continuous pressure to a heatsink to improve the conductivity. For an alternative to screw mounting and clip mounting, adhesive tape allows a double-sided high bond-strength attachment.

Why use heatsink mounting accessories?

Heatsink mounting accessories provide greater reliability within your cooling system and ensure it can operate to its best ability. The right accessories can also contribute to reduced energy use and lower costs.


...
Lees meer Lees minder

Filters

1 - 20 van 63 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Accessory Type For Use With
RS-stocknr. 712-8225
FabrikantRS PRO
€ 2,17
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS-stocknr. 402-456
FabrikantnummerW4605 KIT
FabrikantWinslow
€ 5,05
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS-stocknr. 189-7912
FabrikantnummerTF3/2
€ 2,28
Each
Aantal stuks
Socket TO-3
RS-stocknr. 263-239
FabrikantRS PRO
€ 2,17
1 Kit
Kit(s)
Transistor Mount Kit TO-3
RS-stocknr. 504-0766
FabrikantnummerICKSMDBOX
€ 117,63
Each
Aantal stuks
Heat Sink Box SMD
RS-stocknr. 722-6921
FabrikantnummerTHFU 1
€ 0,126
Each (In a Pack of 25)
Aantal stuks
Retaining Spring LAM Heatsink, SK Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
RS-stocknr. 298-500
FabrikantRS PRO
€ 2,17
Each
Aantal stuks
Transistor Mount Kit SOT-93, TO-126, TO-128, TO-202, TO-220, TO-3P
RS-stocknr. 707-4815
FabrikantRS PRO
€ 16,98
Each
Aantal stuks
Thermal Interface Tape Heatsink
RS-stocknr. 477-4856
FabrikantnummerBP100-0.005-00-00-12
FabrikantBergquist
€ 20,56
Each
Aantal stuks
Adhesive Tape Heatsink
RS-stocknr. 131-1238A
FabrikantRS PRO
€ 0,51
Each (In a Pack of 25)
Aantal stuks
Spring Clip TO-218, TO-220, TO-247, TO-3P
RS-stocknr. 131-1216
FabrikantRS PRO
€ 0,352
Each (In a Pack of 5)
Aantal stuks
Gull Wing Clip TO-220
RS-stocknr. 504-0615
FabrikantnummerTHFM10
€ 1,34
Each (In a Pack of 10)
Aantal stuks
Retaining Spring TO-218, TO-220, TO-247, TO-264
RS-stocknr. 131-1238
FabrikantRS PRO
€ 0,502
Each (In a Pack of 5)
Aantal stuks
Spring Clip TO-218, TO-220, TO-247, TO-3P
RS-stocknr. 707-4819
FabrikantRS PRO
€ 18,08
Each
Aantal stuks
Thermal Interface Tape Heatsink
RS-stocknr. 477-4840
FabrikantnummerBP100-0.005-00-1112
FabrikantBergquist
€ 34,91
Each
Aantal stuks
Adhesive Tape Heatsink
RS-stocknr. 712-4440
FabrikantnummerMAX03G
FabrikantAAVID THERMALLOY
€ 0,364
Each (In a Pack of 5)
Aantal stuks
Clip -
RS-stocknr. 362-9705
FabrikantnummerPISTOLET FILLER
FabrikantBergquist
€ 218,39
Each
Aantal stuks
Gap Filler Dispenser Gun Insulators
RS-stocknr. 707-4828
FabrikantRS PRO
€ 22,26
Each
Aantal stuks
Thermal Interface Tape Heatsink
RS-stocknr. 893-5402
FabrikantnummerCP4A-114C-108E
FabrikantOhmite
€ 77,49
Each
Aantal stuks
Heatsink Four Pass Cold Plate SOT-227 Package Resistor, TA1K0 Ohmite Resistor, TA2K0 Ohmite Resistor, TAP600 Ohmite Resistor, TAP800 Ohmite Resistor
RS-stocknr. 893-5399
FabrikantnummerCP4A-114A-108E
FabrikantOhmite
€ 71,956
Each (In a Pack of 10)
Aantal stuks
Heatsink Four Pass Cold Plate SOT-227 Package Resistor, TA1K0 Ohmite Resistor, TA2K0 Ohmite Resistor, TAP600 Ohmite Resistor, TAP800 Ohmite Resistor
Related Products
Dry thermally conductive graphite washers for use where ...
Description:
Dry thermally conductive graphite washers for use where electrical conductivity together with excellent heat transfer are requiredThermal performance is comparable to that of metal-oxide-filled silicone grease but with no shrinkage or drying out over long periods of timeLow electrical resistance ...
The insulation covers consist of polyamide reinforced by ...
Description:
The insulation covers consist of polyamide reinforced by glass fibre, and the compensation sockets are made from nickel-plated brass. The push-fit sockets compensate for the varying flange heights of different transistor types.
Designed to replace grease as a thermal interfaceEasy ...
Description:
Designed to replace grease as a thermal interfaceEasy to handle in the manufacturing environmentTack free and scratch resistantFlame rating UL 94 V-0.
In some applications, the GAP Pad exerts a ...
Description:
In some applications, the GAP Pad exerts a pressure unable to cope with risks of deterioration. For other applications, it is impossible to apply due to inaccessibility. To solve these problems, Bergquist has created a "GAP Pad liquid", thermal filler ...