brands

attributes.Package_Type

attributes.ProductType

attributes.Impedance_at_25_MHz

attributes.Impedance_at_50_MHz

attributes.Impedance_at_100_MHz

attributes.Packaging

attributes.Impedance_at_300_MHz

attributes.Impedance_at_500_MHz

attributes.Impedance_at_1_GHz

attributes.Current_Rating

attributes.MountType

attributes.SubType

attributes.Type

attributes.Dimensions

attributes.Length

attributes.Minimum_Operating_Temperature

attributes.Pin_Count

attributes.Depth

attributes.Maximum_Operating_Temperature

attributes.Height

attributes.MaximumDcResistance

attributes.StandardsApprovals

attributes.Diameter

Bourns Ferrite Bead 1.5 mm (Surface) (1812) (EMI Filter & Protection), 50 Ω impedance at 25 MHz, 130 Ω impedance at 100

Bourns Ferrite Bead 1.5 mm (Surface) (1812) (EMI Filter & Protection), 65 Ω impedance at 25 MHz, 120 Ω impedance at 100

Bourns Ferrite Bead 0.7 mm (Surface) (0805) (EMI Filter & Protection), 100 Ω impedance at 25 MHz, 220 Ω impedance at 100

Bourns Ferrite Bead 1.6 mm (Surface) (1806) (EMI Filter & Protection), 35 Ω impedance at 25 MHz, 60 Ω impedance at 100

Bourns Ferrite Bead 1.6 mm (Surface) (1806) (EMI Filter & Protection), 45 Ω impedance at 25 MHz, 80 Ω impedance at 100


Ferrite Beads also known as ferrite chokes are passive devices and they are used to constrict high-frequency signals in electronic components. The ferrite becomes resistive over its intended frequency range and uses up the noise energy in the form of heat.

### How do the ferrite beads work?

The ferrite bead is connected in series with the power supply rail and is often combined with the capacitors to ground on either side of the bead. This then forms a low-pass filter network, further reducing the high-frequency power supply noise. Use SPICE (Simulation Program with Integrated Circuit Emphasis) or another similar tool to ensure any anti-resonance peaks caused by ferrite or PCB inductive structure does not violate the target impedance limit.

### Ferrite Beads come in two categories:
- High-Q Beads - typically used as resonators and must not be used in power isolation circuits
- Low-Q Beads - these are also called absorptive beads and they are lossy and make good filter networks because they are designed to absorb high-frequency noise currents and dissipate it as heat

### What to consider when choosing Ferrite Beads?
- Make sure that any voltage drop does not cause the target supply rail to fall below the recommended operating conditions of the device
- The ferrite bead is inductive, therefore do not use it with High-Q decoupling capacitors
- Applying ferrite beads correctly can be an effective and inexpensive way to reduce high-frequency noise and switching transients

### Where are Ferrite Beads used?
- Eliminating high-frequency EMI noise on any circuit design
- Electronic devices such as mobile phones
- Computers and laptops
- TV tuners
- Audio Players
- DVD's
- Gaming Systems


Ferrite Beads

EMI Filters & Protection

Passive Components

1228569899

1419482333

1422205366

1492797549

1805640584

1950438482

2099506070

2277269800

2972144945

3379516231

3437032725

3893962904

4269790141

482906937

607105215

630592386

836591139

1337321341

1713511683

1953764780

215561600

2212326362

245755136

2675376924

2694081498

2854130884

3031041232

3141911626

3479376779

3503142162

3537785963

3606191116

3676807775

3696367266

3871454867

3929125222

3980878867

4085774260

4185424055

4239710393

730636658

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

Buy Bourns Ferrite Beads. Browse our latest Ferrite Beads  offers. Free Next Day Delivery.

Bourns Ferrite Beads | RS

Bourns Ferrite Beads

105 Producten voor Bourns Ferrite Beads

Populaire zoekopdrachten

Gerelateerde Links