Brass & Copper Push Fit Fittings

Copper Pipe Fittings
Copper is used as it can tolerate very high temperatures and as such, is used widely for central heating applications

Different types of Fittings

Adapters
Adapters are used to extend runs, or to simply change the connection type at the end of a pipe

Bushings
Bushings are used to join pipes of different sizes, usually by reducing a larger fitting down to a smaller pipe.

Couplings
A coupling is used to extend the run of a pipe, or change pipe sizes

Elbows
If you need to change the direction of flow, elbows are likely your best bet. Produced primarily in 90 and 45 degree angles (unique sizes like 22.5 and 60 are also available), elbows can be threaded or sweated, and are one of the most crucial fittings used in plumbing

Tees
When more than one branch is required of a water supply, tees are the way to go. Essentially a long coupling with an outlet on the side, these fittings feature their outlets at 90° from the inlet, and are sized according to their "run" (the horizontal, or straight-through dimension of the fitting), and the side outlet (the "top" of the fitting, 90 degrees off the run). When the run of a tee is smaller than the side outlet, it's often referred to as a "bull head" fitting.

Caps and Plugs
A cap, as its name suggests, is a cap that goes over the end of a pipe, creating a dead end. Plugs also stop up a pipe or tube system, but are plugged, like a stopper, into the end of the pipe.

Cross type Fitting
Cross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.

...
Lees meer Lees minder

Filters

1 - 20 van 26 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Fitting Direction Fitting Type Push Fit Pipe Size Threaded Connection Threaded Tee Connection Demountable Connection Gender Tee Gender Thread Size Thread Size Tee Thread Standard Thread Standard Tee Material
RS-stocknr. 199-2360
Fabrikantnummer15MC(1/2)BRASS
FabrikantJohn Guest
€ 7,51
Each
Aantal stuks
Straight Coupler 15mm 1/2 in BSP Male - Yes - Male 1/2in - BSP - Brass
RS-stocknr. 340-6776
FabrikantnummerMM052206N
FabrikantJG Speedfit
€ 9,963
Each (In a Pack of 3)
Aantal stuks
Straight Stem Adapter 22mm 3/4 in R Male - - - Male 3/4in - R - Brass
RS-stocknr. 340-6748
FabrikantnummerPM15WB
FabrikantJG Speedfit
€ 15,19
Each
Aantal stuks
90° Wall Plate Elbow Adapter 15mm - - - - - 1/2in - BSP - Brass
RS-stocknr. 199-2376
Fabrikantnummer22MC(3/4)BRASS
FabrikantJohn Guest
€ 13,86
Each
Aantal stuks
Straight Coupler 22mm 3/4 in BSP Male - Yes - Male 3/4in - BSP - Brass
RS-stocknr. 468-6197
Fabrikantnummer15HSV
FabrikantJohn Guest
€ 18,29
Each
Aantal stuks
- Service Valve 15mm - - Yes - - 1/2in - BSP - Brass
RS-stocknr. 712-6720
FabrikantnummerTX12S/TX092 15
FabrikantPegler Yorkshire
€ 6,10
Each (In a Pack of 2)
Aantal stuks
90° Street Elbow 15mm - - Yes - - - - - - Brass
RS-stocknr. 712-6724
FabrikantnummerTX24/TX130 15
FabrikantPegler Yorkshire
€ 8,59
Each
Aantal stuks
- Equal Tee 15mm - - Yes - - - - - - Brass
RS-stocknr. 712-6727
Fabrikantnummer65114
FabrikantPegler Yorkshire
€ 4,96
Each (In a Pack of 2)
Aantal stuks
Straight Coupler 15mm - - Yes - - - - - - Brass
RS-stocknr. 712-6730
Fabrikantnummer65524
FabrikantPegler Yorkshire
€ 9,24
Each
Aantal stuks
90° Elbow 22mm - - Yes - - - - - - Brass
RS-stocknr. 712-6774
FabrikantnummerTX21/TX041 15
FabrikantPegler Yorkshire
€ 6,94
Each
Aantal stuks
Obtuse Elbow 15mm - - Yes - - - - - - Brass
RS-stocknr. 340-6754
FabrikantnummerPM22WB
FabrikantJG Speedfit
€ 17,86
Each
Aantal stuks
90° Wall Plate Elbow Adapter 22mm - - - - - 3/4in - BSP - Brass
RS-stocknr. 712-6736
FabrikantnummerTX480 15
FabrikantPegler Yorkshire
€ 15,57
Each
Aantal stuks
- Service Valve 15mm - - Yes - - - - - - Brass
RS-stocknr. 712-6742
FabrikantnummerTX61/TX301 15
FabrikantPegler Yorkshire
€ 4,57
Each (In a Pack of 2)
Aantal stuks
- End Stop 15mm - - Yes - - - - - - Brass
RS-stocknr. 712-6733
FabrikantnummerTX3/TX243G 15
FabrikantPegler Yorkshire
€ 6,47
Each (In a Pack of 2)
Aantal stuks
Straight Taper Coupler 15mm 1/2 in R Male - Yes - Male 1/2in - R - Brass
RS-stocknr. 712-6777
FabrikantnummerTX3/TX243G 22X3/4
FabrikantPegler Yorkshire
€ 15,55
Each
Aantal stuks
Straight Taper Coupler 22mm 3/4 in R Male - Yes - Male 3/4in - R - Brass
RS-stocknr. 340-6760
FabrikantnummerMM051504N
FabrikantJG Speedfit
€ 6,507
Each (In a Pack of 3)
Aantal stuks
Straight Stem Adapter 15mm 1/2 in R Male - - - Male 1/2in - R - Brass
RS-stocknr. 712-6714
FabrikantnummerTX12/TX090 15
FabrikantPegler Yorkshire
€ 5,815
Each (In a Pack of 2)
Aantal stuks
90° Elbow 15mm - - Yes - - - - - - Brass
RS-stocknr. 712-6768
Fabrikantnummer65874
FabrikantPegler Yorkshire
€ 6,86
Each
Aantal stuks
- End Stop 22mm - - Yes - - - - - - Brass
RS-stocknr. 712-6749
FabrikantnummerTX2/TX270G 15X1/2
FabrikantPegler Yorkshire
€ 10,12
Each
Aantal stuks
Straight Coupler 15mm 1/2 in G Female - Yes - Female 1/2in - G - Brass
RS-stocknr. 468-6210
Fabrikantnummer15SVSTC
FabrikantJohn Guest
€ 16,74
Each
Aantal stuks
- Service Valve 15mm - - Yes - - 1/2in - BSP - Brass
Related Products
Series couplers are adapted for all applications working ...
Description:
Series couplers are adapted for all applications working with water and compressed air. Flow : 2200 Nl/min (78 cfm)Straight throughMaximum working pressure: 20 bar, 2 MPa 290 psiWorking temperature: -20 → +100 °C"O" - ring: NBRSpring: Stainless steel.
Assembled with a probe, forms a quick acting ...
Description:
Assembled with a probe, forms a quick acting coupler adapted to applications using water and compressed air. Flow : 2200 Nl/min (78 cfm)Straight throughMaximum working pressure: 20 bar, 2 MPa 290 psiWorking temperature: -20 → +100 °C"O" - ring: NBRSpring: ...
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...