Stainless Steel Solder Fittings

Solder fittings, also known as capillary fittings, are short sections of smooth pipe designed to slide over the outside of the mating tube. Solder wire is fed then around the edge of the fitting and heated to seal it. Stainless steel solder fittings benefit from the metal’s strength, resistance to corrosion and ease of cleaning.

What are stainless steel solder fittings used for?

Stainless steel solder fittings are used in many industries, including those which require pipes and fittings to transport and come in contact with food, beverages, or other products, and thus have strict hygiene practices. These include the food, dairy, brewing, biotechnology, pharmaceutical and chemical industries.

Types of stainless steel solder fittings

Elbow fittings are fittings that produce curves at specific degrees (such as 90- and 45-degree curves) depending on the model.

Tee fittings are T-shaped, and are designed to connect three pipes.

Straight fittings are available in several different forms. Some serve as connectors for two adjacent pipes, but others are end caps that are attached to the end of a single pipe.


...
Lees meer Lees minder

Filters

1 - 20 van 83 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Fitting Direction Fitting Type Outer Diameter
RS-stocknr. 918-6273
FabrikantRS PRO
€ 0,685
Each (In a Pack of 10)
Aantal stuks
Straight - -
RS-stocknr. 265-4081
FabrikantRS PRO
€ 29,05
Each
Aantal stuks
90° Elbow 76.2mm
RS-stocknr. 918-6291
FabrikantRS PRO
€ 1,116
Each (In a Pack of 10)
Aantal stuks
Straight - 54mm
RS-stocknr. 918-6251
FabrikantRS PRO
€ 4,11
Each
Aantal stuks
Straight - 24mm
RS-stocknr. 918-6100
FabrikantRS PRO
€ 9,29
Each
Aantal stuks
Straight - 63mm
RS-stocknr. 918-6298
FabrikantRS PRO
€ 1,036
Each (In a Pack of 10)
Aantal stuks
Straight - 42mm
RS-stocknr. 918-6103
FabrikantRS PRO
€ 6,71
Each
Aantal stuks
Straight - 44mm
RS-stocknr. 918-6184
FabrikantRS PRO
€ 4,90
Each
Aantal stuks
Straight - 29mm
RS-stocknr. 918-6235
FabrikantRS PRO
€ 12,41
Each
Aantal stuks
Straight - 53mm
RS-stocknr. 265-4069
FabrikantRS PRO
€ 17,01
Each
Aantal stuks
90° Elbow 50.8mm
RS-stocknr. 918-6289
FabrikantRS PRO
€ 0,965
Each (In a Pack of 10)
Aantal stuks
Straight - 36mm
RS-stocknr. 918-6267
FabrikantRS PRO
€ 7,76
Each
Aantal stuks
Straight - 41mm
RS-stocknr. 918-6172
FabrikantRS PRO
€ 4,21
Each
Aantal stuks
Straight - 19mm
RS-stocknr. 918-6336
FabrikantRS PRO
€ 7,83
Each
Aantal stuks
Straight - 35mm
RS-stocknr. 265-4261
FabrikantRS PRO
€ 47,71
Each
Aantal stuks
- Equal Tee 76.2mm
RS-stocknr. 918-6311
FabrikantRS PRO
€ 7,11
Each
Aantal stuks
Straight - 48mm
RS-stocknr. 265-4277
FabrikantRS PRO
€ 12,18
Each
Aantal stuks
- Pulled Tee 25.4mm
RS-stocknr. 918-6342
FabrikantRS PRO
€ 13,67
Each
Aantal stuks
Straight - 61mm
RS-stocknr. 918-6106
FabrikantRS PRO
€ 7,59
Each
Aantal stuks
Straight - 54mm
RS-stocknr. 265-4104
FabrikantRS PRO
€ 8,85
Each
Aantal stuks
90° Elbow 25.4mm
Related Products
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
The Parker Hannifin range of stainless steel Instrumentation ...
Description:
The Parker Hannifin range of stainless steel Instrumentation tubing, tube fittings, valves, regulators and manifolds are manufactured to meet the demand for precision-engineered instrumentation components of the highest quality. All products meet or exceed the relevant worldwide standards.,A-LOK® double ferrule ...