Hydraulic Lever Actuated Directional Control Valves - CETOP Mounting

Filters

1 - 2 van 2 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Spool Type CETOP Mounting Lever Operation Manufacturer Series Maximum Flow Rate Maximum Operating Pressure Maximum Operating Temperature Minimum Operating Temperature Number of Ports Number of Positions Valve Direction Type
RS-stocknr. 823-825
FabrikantnummerR900469302
FabrikantBosch Rexroth
€ 485,04
Each
Aantal stuks
J CETOP 3 Spring Return 5X 60L/min 160 (Port T) bar, 315 (Port A/B/P) bar +80°C -30°C 4-way 3 4-Way/3 Position
RS-stocknr. 823-819
FabrikantnummerR900467936
FabrikantBosch Rexroth
€ 334,11
Each
Aantal stuks
E CETOP 3 Spring Return 5X 60L/min 160 (Port T) bar, 315 (Port A/B/P) bar +80°C -30°C 4-way 3 4-Way/3 Position
Related Products
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...
ZNS series CETOP 03 counterbalance use a leak ...
Description:
ZNS series CETOP 03 counterbalance use a leak free poppet valve to provide reliable and smooth operation of a hydraulic actuator when overrunning. A pilot valve operated by the inlet flow controls the return flow and ensures smooth and cavitation ...
Single acting and double acting in-line flow control ...
Description:
Single acting and double acting in-line flow control valves. Single acting valves allow flow control in one direction and free flow in the opposite direction. Double acting valves allow flow control in both directions. Needle adjustment for full shut-off or ...
CETOP mounting hydraulic pressure relief valves suitable for ...
Description:
CETOP mounting hydraulic pressure relief valves suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 10 to 800 mm²/second viscosity. Sandwich plate designClosed at rest with relief to tank when the pre-set pressure is ...