Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.
Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.
Pneumatic systems contain many components(for example tubing, fittings, adapters) and pneumatic fittings maintenance kits aid in the maintenance of these systems.
What are pneumatic fittings maintenance kits used for?
Pneumatic fittings maintenance kits contain a variety of adaptors, fittings and accessories which will keep your pneumatic system in good working order and allow you to quickly repair the system in the event of breakdown.
Types of pneumatic fittings maintenance kits
Pneumatic fittings maintenance kits may contain tube-to-tube fittings, elbows, stand pipes, PTFE (polytetrafluoroethylene) tape, tube cutters and blanking plugs.
4 mm Blanking Plug, 4 mm Equal Connector, 4 mm Equal Tee, 4 mm x 6 mm Reducer, 4 mm x G1/4 Male Stud Fitting, 4 mm x G1/8 Male Stud Fitting, 4 mm x G1/8 Stud Elbow, 6 mm Blanking Plug, 6 mm Equal Connector, 6 mm Equal Elbow, 6 mm Equal Tee, 6 mm x 8 mm Reducer, 6 mm x G1/4 Male Stud Fitting, 6 mm x G1/4 Stud Elbow, 6 mm x G1/8 Male Stud Fitting, 6 mm x G1/8 Stud Elbow, 8 mm Blanking Plug, 8 mm Equal Connector, 8 mm Equal Elbow, 8 mm Equal Tee, 8 mm x G1/4 Male Stud Fitting, 8 mm x G1/4 Stud Elbow, 8 mm x G1/8 Stud Elbow, Nylon Tube Cutter
0605 12 12 Fluoropolymer Tape, 3000 71 00 Tube Cutter, 4 mm (Dia.) Blanking Plugs x 20, 4 mm (Dia.) Equal & Unequal Tee x 10, 4 mm (Dia.) Male Stud Coupling x 10, 4 mm (Dia.) Male Stud Elbow x 20, 4 mm (Dia.) Reducer x 10, 4 mm (Dia.) Tube to Tube Connector x 10, 6 mm (Dia.) Blanking Plugs x 20, 6 mm (Dia.) Equal & Unequal Elbow x 10, 6 mm (Dia.) Equal & Unequal Tee x 10, 6 mm (Dia.) Male Stud Coupling x 10, 6 mm (Dia.) Male Stud Elbow x 20, 6 mm (Dia.) Reducer x 10, 6 mm (Dia.) Tube to Tube Connector x 10, 8 mm (Dia.) Blanking Plugs x 20, 8 mm (Dia.) Equal & Unequal Elbow x 10, 8 mm (Dia.) Equal & Unequal Tee x 10, 8 mm (Dia.) Male Stud Coupling x 10, 8 mm (Dia.) Male Stud Elbow x 20, 8 mm (Dia.) Tube to Tube Connector x 10
0605 12 12 Fluoropolymer Tape, 3000 71 00 Tube Cutter, 4 mm (Dia.) Blanking Plugs x 20, 4 mm (Dia.) Equal & Unequal Tee x 10, 4 mm (Dia.) Male Stud Coupling x 20, 4 mm (Dia.) Male Stud Elbow x 10, 4 mm (Dia.) Reducer x 10, 4 mm (Dia.) Tube to Tube Connector x 10, 6 mm (Dia.) Blanking Plugs x 20, 6 mm (Dia.) Equal & Unequal Elbow x 10, 6 mm (Dia.) Equal & Unequal Tee x 10, 6 mm (Dia.) Male Stud Coupling x 20, 6 mm (Dia.) Male Stud Elbow x 10, 6 mm (Dia.) Reducer x 10, 6 mm (Dia.) Tube to Tube Connector x 10, 8 mm (Dia.) Blanking Plugs x 20, 8 mm (Dia.) Equal & Unequal Elbow x 10, 8 mm (Dia.) Equal & Unequal Tee x 10, 8 mm (Dia.) Male Stud Coupling x 20, 8 mm (Dia.) Male Stud Elbow x 10, 8 mm (Dia.) Tube to Tube Connector x 10
Description:
Adaptors for connecting pneumatic hose at right-angles. Bolts
made from zinc-passivated steel and plastic bodiesNitrile ’O’ ringsMax operating pressure 20 barTemperature range -20 to 80°C.
Description:
Nickel-plated brass body material. Enhances the aesthetic appearance
of installations and complements existing push-in fitting ranges. The items are corrosion resistant.
Description:
Shut off a circuit end. Assembly with a
flat wrench or an Allen wrench. Available in metric or parallel versions. Perfect sealing due to an integral 'O' ring seal.
