Pneumatic Pressure Regulator Function Fittings

Pneumatic technology uses pressured gas to drive some sort of mechanical motion. The most common gas used in pneumatic technology is dry air. The air must be dry as moisture has different compressive qualities. Pneumatic technology is very similar to hydraulic technology, however the fluid used to drive the motion here is always a liquid.

Pneumatic systems are operated using a central pneumatic device (such as an air motor or compressor) and utilise manual or automatic solenoid valves to control the airflow around the system.

Pneumatic systems contain many components, pneumatic pressure regulator function fittings being one example.

What are pneumatic pressure regulator function fittings used for?

Pneumatic pressure regulator function fittings are used to ensure the pressure in the system stays within the desired range. If the pressure gets too high or too low the fittings are activated and the flow is adjusted to prevent an over or under pressure.

Types of pneumatic pressure regulator function fittings

Pneumatic pressure regulator function fittings come in a variety of diameters, fits, grades and pressure ranges.


...
Lees meer Lees minder

Filters

1 - 11 van 11 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Manufacturer Series Threaded Inlet Port Tube Inlet Port Outlet Port Type Tube Outlet Port Maximum Input Pressure Minimum Outlet Pressure Threaded Inlet Port Thread Standard Maximum Outlet Pressure Threaded Inlet Port Gender Threaded Inlet Port Size Inlet Port Type
RS-stocknr. 398-5538
Fabrikantnummer7300 08 10
FabrikantLegris
€ 45,27
Each
Aantal stuks
7300 G 1/8 Male - Tube 8mm 16bar - G - Male 1/8 in Threaded
RS-stocknr. 398-5522
Fabrikantnummer7300 06 13
FabrikantLegris
€ 39,90
Each
Aantal stuks
7300 G 1/4 Male - Tube 6mm 16bar - G - Male 1/4 in Threaded
RS-stocknr. 398-5500
Fabrikantnummer7300 04 10
FabrikantLegris
€ 42,16
Each
Aantal stuks
7300 G 1/8 Male - Tube 4mm 16bar - G - Male 1/8 in Threaded
RS-stocknr. 398-5516
Fabrikantnummer7300 06 10
FabrikantLegris
€ 42,85
Each
Aantal stuks
7300 G 1/8 Male - Tube 6mm 16bar - G - Male 1/8 in Threaded
RS-stocknr. 387-4854
Fabrikantnummer016H6703
FabrikantEliwell
€ 52,00
Each
Aantal stuks
016H G 1/4 Male - - - - 0bar G 7bar Male 1/4 in Threaded
RS-stocknr. 203-8539
FabrikantnummerLR-1/8-QS-4
FabrikantFesto
€ 46,33
Each
Aantal stuks
LR-1/8-QS-4 - G1/8 Threaded 4mm - - - - - 1/8: Threaded
RS-stocknr. 398-5544
Fabrikantnummer7300 08 13
FabrikantLegris
€ 45,94
Each
Aantal stuks
7300 G 1/4 Male - Tube 8mm 16bar - G - Male 1/4 in Threaded
RS-stocknr. 203-8564
FabrikantnummerLR-1/8-QS-8
FabrikantFesto
€ 52,81
Each
Aantal stuks
LR-1/8-QS-8 - 8mm Threaded 8mm - - - - - 1/8: Threaded
RS-stocknr. 203-8671
FabrikantnummerLR-1/8-QS-6
FabrikantFesto
€ 49,80
Each
Aantal stuks
LR-1/8-QS-6 - G1/8 Threaded 6mm - - - - - 1/8: Threaded
RS-stocknr. 203-8670
FabrikantnummerLR-1/4-QS-6
FabrikantFesto
€ 54,01
Each
Aantal stuks
LR-1/4-QS-6 - 6mm Threaded 6mm - - - - - 1/4 Threaded
RS-stocknr. 203-8520
FabrikantnummerLR-1/4-QS-8
FabrikantFesto
€ 57,48
Each
Aantal stuks
LR-1/4-QS-8 - 8mm Threaded 8mm - - - - - 1/4 Threaded
Related Products
A range of compact flow regulators with recessed ...
Description:
A range of compact flow regulators with recessed screw adjustment. Ideal for use in confined spaces or on small cylindersHelps prevent unwanted or accidental flow adjustmentAvailable as cylinder mounting exhaust version or pilot valve supply versionCompatible with Nylon or Polyurethane ...
Festo LRMA series pressure regulator maintains a constant ...
Description:
Festo LRMA series pressure regulator maintains a constant output pressure on the secondary side independent of pressure fluctuations on the primary side and air consumption. The primary pressure at the screw-in thread is reduced when air is exhausted from the ...
The Festo MS series pressure regulator is used ...
Description:
The Festo MS series pressure regulator is used for manifold assembly with a thread connection size of G1/4. It is a directly-controlled diaphragm regulator design structure and angled outlet block with QS push-in connector. The regulator has a working pre. ...
The Festo MS series indirectly controlled regulator has ...
Description:
The Festo MS series indirectly controlled regulator has a thread connection size of G3/8 . The piloted precision diaphragm design structure regulator design structure has a working pressure up to 12 bar. Actuator lock - rotary knob with lockAssembly position ...