Pneumatic Drain Valves

Pneumatic drain valves are devices used in pneumatic air preparationto remove condensates from pneumatic or compressed air systems.

Why are pneumatic drain valves important?

Pneumatic drain valves play a crucial role in compressed air systems by removing condensates from the system without it needing to be shut down.

This is important because condensates can damage or reduce the efficiency of your system if not removed. For example, moisture can wash lubrication off tools and production equipment, meaning maintenance and downtime are required. Excess moisture can also cause rust and scale can form in the system.

Features and benefits of pneumatic drain valves

You can choose from different types of pneumatic drain valves depending on the application you need them for. Features and benefits may include:

  • Air valve design – uses a magnetic force to ensure both a positive opening and closing that will prevent any air loss.
  • Ball support and positioning system – prevents sealing failure around the valve stem.
  • Manual test button – provides confirmation of valve operation.

...
Lees meer Lees minder

Filters

1 - 2 van 2 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Manufacturer Series Inlet Port Outlet Port Supply Voltage Body Material Seal Material Dimensions IP Rating Inlet Port Thread Standard Height Outlet Port - Thread Size Inlet Port - Thread Size Maximum Operating Pressure Minimum Operating Pressure
RS-stocknr. 725-125
FabrikantRS PRO
€ 156,54
Each
Aantal stuks
V9112 R 3/8 R 3/8 240V Brass Nitrile Rubber 123 x 96mm IP65 R 123mm 3/8in 3/8in 16 bar 0bar
RS-stocknr. 210-244
FabrikantnummerEAD402-F04
FabrikantSMC
€ 54,65
Each
Aantal stuks
EAD402 G 3/8 G 1/2 - - - 82 (Dia.) x 184mm - G 184mm - - 9.9 bar -
Related Products
The single station gauge isolator valve by Parker ...
Description:
The single station gauge isolator valve by Parker has been designed to prevent pressure gauge damage and extend gauge life.When installed between gauge and pressure line, it protects the pressure gauge from continuous hydraulic pressure, surges or shock loads.Operated by ...
A fully automatic drip leg drain for removing ...
Description:
A fully automatic drip leg drain for removing liquids from pneumatic/compressed air systems. Manufactured from zinc alloy with a transparent polycarbonate bowl. A G1/8 connection on the bottom of the bowl allows the collected liquids to be piped away and ...
Chromium plated finished brass body with 15 mm ...
Description:
Chromium plated finished brass body with 15 mm compression x 1//2 in.BSP male connections Maximum Water Temperature 120°C.Working Pressure (Non-Shock) 10bar. Lubricated long life gland packing. Glands can be removed without draining downThese valves are suitable for use with BS2871 ...
Suitable for heating systems and other hot water ...
Description:
Suitable for heating systems and other hot water systems (not potable water), which require the efficient automatic removal of air from waterThe vacuum break on the bottom of the valve prevents an air lock forming and encourages air to be ...