Pneumatic Grippers

Pneumatic grippers are devices designed to hold an object using pneumatic, electric or hydraulic operated jaws or fingers. Grippers can be used as single devices or as a part of pick and place, manufacturing systems. Grippers can be used to pick up/hold various size objects from very small items such as semiconductors to very large items like car chassis or engines. Grippers are frequently added to industrial robots in order to allow robots interactions with objects.

Grippers can be divided into 2 main categories by type of holding objects:
• External – the simplest and most popular method of holding objects. When the gripper jaws close, the closing force of the gripper holds that object.
• Internal – When the access to object’s exterior is required then an internal grip is necessary. Jaws or finger hold the object from the centre. In this case, the opening force of the gripper is used to hold the object.

What to consider when choosing the gripper:
• Shape , orientation and dimensional variation - If the object has two opposing flat surfaces, then 2 jaw parallel gripper is desired since it can handle some dimensional variation. Jaws can also be designed to handle cylindrical objects with the 2 jaw concept. Keep in mind that a retention or encompassing grip requires much less force.
• Weight - Grip force must be adequate to secure the object while the desired operation is performed on the object. The type of jaw design must be part of the force requirement. Keep in mind that you should add a safety factor to the amount of force that you select and air pressure is a factor to keep in mind.
• Accessibility- This applies both to the work being performed on the object and the amount of room for the gripper jaws. If the work is to the exterior of the object then it may require an internal grip. Angular grippers are usually less expensive but require additional space for jaw movement.
• Environmental - Harsh environment or clean room applications require grippers designed for those purposes.
• Retention of the Object - When air pressure is lost, the gripper will relax its grip on the object and the object may be dropped. There are spring assist grippers designed for this type application.

...
Lees meer Lees minder

Filters

61 - 80 van 101 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Manufacturer Series Action Number of Fingers Gripping Type Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Port Connection Weight Size Type
RS-stocknr. 196-1185
FabrikantnummerMRHQ20D-180S-N
FabrikantSMC
€ 973,82
Each
Aantal stuks
MRHQ Double 2 Parallel 0.7 MPa 0.7MPa - - 1.1kg -
RS-stocknr. 700-7310
FabrikantnummerMHS3-25D
FabrikantSMC
€ 493,22
Each
Aantal stuks
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 140g -
RS-stocknr. 700-7288
FabrikantnummerMHF2-16D1
FabrikantSMC
€ 561,85
Each
Aantal stuks
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 445g -
Nieuw
RS-stocknr. 203-1513
FabrikantnummerDHPS-16-A-NO
FabrikantFesto
€ 433,98
Each
Aantal stuks
DHPS-16-A-NO Double 2 Parallel 8 bar - - - - -
Nieuw
RS-stocknr. 203-1493
FabrikantnummerDHPS-6-A
FabrikantFesto
€ 287,04
Each
Aantal stuks
DHPS-6-A Double 2 Parallel 8 bar - - - - -
RS-stocknr. 196-4477
FabrikantnummerMHZJ2-10D
FabrikantSMC
€ 392,42
Each
Aantal stuks
MHZ Double 2 Parallel 0.7 MPa - - M3 x 0.5 60g Standard
Nieuw
RS-stocknr. 203-1500
FabrikantnummerDHWS-40-A-NC
FabrikantFesto
€ 563,27
Each
Aantal stuks
DHWS-40-A-NC Double 2 Angle 8 bar - - - - -
Nieuw
RS-stocknr. 203-1504
FabrikantnummerDHWS-40-A
FabrikantFesto
€ 482,80
Each
Aantal stuks
DHWS-40-A Double 2 Angle 8 bar - - - - -
Nieuw
RS-stocknr. 203-1475
FabrikantnummerDHPS-16-A-NC
FabrikantFesto
€ 433,98
Each
Aantal stuks
DHPS-16-A-NC Double 2 Parallel 8 bar - - - - -
RS-stocknr. 366-3597
FabrikantnummerMHZ2-10DN
FabrikantSMC
€ 316,80
Each
Aantal stuks
MHZ2 Double 2 Parallel 0.7 MPa - - M3 x 0.5 55g -
RS-stocknr. 366-3626
FabrikantnummerMHZ2-25DN
FabrikantSMC
€ 434,49
Each
Aantal stuks
MHZ2 Double 2 Parallel 0.7 MPa - - M5 x 0.8 430g -
Nieuw
RS-stocknr. 203-1503
FabrikantnummerDHPS-20-A-NC
FabrikantFesto
€ 512,16
Each
Aantal stuks
DHPS-20-A-NC Double 2 Parallel 8 bar - - - - -
RS-stocknr. 245-0003
FabrikantnummerMHS3-20D
FabrikantSMC
€ 463,20
Each
Aantal stuks
MHS3 Double 3 Parallel 0.6 MPa - - M5 x 0.8 100g -
RS-stocknr. 196-4471
FabrikantnummerMHK2-12D
FabrikantSMC
€ 389,83
Each
Aantal stuks
MHK2 Double 2 Parallel 0.6 MPa - - M3 x 0.5 75g Standard
Nieuw
RS-stocknr. 203-1658
FabrikantnummerDHWS-16-A-NC
FabrikantFesto
€ 334,88
Each
Aantal stuks
DHWS-16-A-NC Double 2 Angle 8 bar - - - - -
RS-stocknr. 196-4476
FabrikantnummerMHZ2-20C
FabrikantSMC
€ 369,37
Each
Aantal stuks
MHZ Single 2 Parallel 0.7 MPa - - M5 240g Standard
RS-stocknr. 700-7279
FabrikantnummerMHF2-16D
FabrikantSMC
€ 531,76
Each
Aantal stuks
MHF2 Double 2 Low Profile, Parallel 0.7 MPa - - M5 350g -
Nieuw
RS-stocknr. 203-1509
FabrikantnummerDHWS-10-A
FabrikantFesto
€ 239,22
Each
Aantal stuks
DHWS-10-A Double 2 Angle 8 bar - - - - -
RS-stocknr. 196-4473
FabrikantnummerMHS2-25D
FabrikantSMC
€ 373,01
Each
Aantal stuks
MHS Double 2 Parallel 0.6 MPa - - M5 134g Standard
Nieuw
RS-stocknr. 203-1486
FabrikantnummerDHDS-32-A
FabrikantFesto
€ 592,12
Each
Aantal stuks
DHDS-32-A Double 3 - 8 bar - - - - -
Related Products
Double actingOperating pressure 1 – 6 barTemperature range ...
Description:
Double actingOperating pressure 1 – 6 barTemperature range 0°C to 60°COpening angle 30°(open), 10°(closed)Holding moment at 5 bar is 0.1Nm (10mm bore), 0.4Nm (16mm), 0.7Nm (20mm), 1.4Nm (25mm)Repeatability of closing position ±0.01mmMaximum operating frequency 180cpmLubrication not required.
The MHL series from SMC are air grippers ...
Description:
The MHL series from SMC are air grippers ideal for gripping different sized parts. These pneumatic grippers are designed with dual piston construction creating a compact gripper with a large holding force. Wide opening air gripperParallel styleAuto switch capable.
High gripping forceStandard magnetic sensingHigh accuracy mountingIntegral guide ...
Description:
High gripping forceStandard magnetic sensingHigh accuracy mountingIntegral guide constructionRepeat accuracyAbrasion-resistant fingersOperating temperature -10°C → 60°COperating Pressure range for 10 mm bore 2 → 7 barOperating Pressure range for 16 → 25 mm bore 1 → 7 bar.
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...