Pneumatic Pin Cylinders

Pneumatic pin (needle) cylinders are compact (space saving) mechanical devices that transform compressed air power into linear forces to drive a mechanical motion. A cylinder consists of a piston, rod and plunger surrounded by a cylindrical bore.

These cylinders occupy less space than other pneumatic cylinders because components like switches can be mounted onto them via panel (on top of device) or embedded mounting (inside device).

Their bodies are made of brass and the rods are constructed of stainless steel for extra durability. They do not require additional lubrication which makes them relatively maintenance free.

What are pneumatic pin cylinders used for?

Pin cylinders are used for precision parts assembling in tight spaces. For example during automated soldering activities where components to be joined (soldered) are located behind panel enclosures and can only be accessed through tiny openings.

Types of pneumatic pin cylinders

  • Single acting means there is one port from where the compressed air flows to push the rod out. The rod is then retracted with a spring mechanism.
  • Double acting means there are two ports from which compressed air can flow out and back in to push and retract the rod.

...
Lees meer Lees minder

Filters

1 - 20 van 58 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Manufacturer Series Action Bore Stroke Piston Speed Maximum Operating Pressure Absolute Maximum Pressure Cushioning Type Force at 7 bar Port Connection Dimensions Weight Minimum Piston Speed Diameter
RS-stocknr. 183-4012
FabrikantnummerCJPB15-15H6
FabrikantSMC
€ 28,67
Each
Aantal stuks
CJP Single 15mm 15mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 50 x 27 x 31mm 92g 50mm/s -
RS-stocknr. 183-4006
FabrikantnummerCJPB15-10H6
FabrikantSMC
€ 29,19
Each
Aantal stuks
CJP Single 15mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 43.5 x 27 x 31mm 82g 50mm/s -
RS-stocknr. 183-3996
FabrikantnummerCJPB10-15H6
FabrikantSMC
€ 21,54
Each
Aantal stuks
CJP Single 10mm 15mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 46 x 19 x 22mm 38g 50mm/s -
RS-stocknr. 183-3974
FabrikantnummerCJPB10-5H6
FabrikantSMC
€ 21,54
Each
Aantal stuks
CJP Single 10mm 5mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 32.5 x 19 x 22mm 28g 50mm/s -
RS-stocknr. 686-2554
FabrikantnummerCUJB10-10S
FabrikantSMC
€ 27,62
Each
Aantal stuks
CUJ Single 10mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M3 x 0.5 29 x 13.5 x 22mm 22.3g 50mm/s -
RS-stocknr. 264-6169
FabrikantnummerCJ1B4-20SU4
FabrikantSMC
€ 20,82
Each
Aantal stuks
CJ1 Single 4mm 20mm 50 → 500mm/s 0.7 MPa - Not Cushioned - U4 5 (Dia.) x 67mm 13.2g 50mm/s 5mm
RS-stocknr. 183-3980
FabrikantnummerCJPB10-10H6
FabrikantSMC
€ 21,54
Each
Aantal stuks
CJP Single 10mm 10mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 39 x 19 x 22mm 33g 50mm/s -
RS-stocknr. 547-619
FabrikantnummerCDJP2B10-5D
FabrikantSMC
€ 31,86
Each
Aantal stuks
CJP2 Double 10mm 5mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 44.5 x 15 x 19mm 27g 50mm/s -
RS-stocknr. 183-3946
FabrikantnummerCJPB6-5H6
FabrikantSMC
€ 16,42
Each
Aantal stuks
CJP Single 6mm 5mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 27.5 x 12 x 13.9mm 10.6g 50mm/s -
RS-stocknr. 686-2536
FabrikantnummerCJPB6-5H4
FabrikantSMC
€ 16,42
Each
Aantal stuks
CJP Single 6mm 5mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 27.5 x 12 x 13.9mm 10.6g 50mm/s -
RS-stocknr. 183-3968
FabrikantnummerCJPB6-15H6
FabrikantSMC
€ 16,42
Each
Aantal stuks
CJP Single 6mm 15mm 50 → 500mm/s 0.7 MPa - Not Cushioned - M5 x 0.8 41.5 x 12 x 13.9mm 15.6g 50mm/s -
RS-stocknr. 547-528
FabrikantnummerCDJP2B10-30D
FabrikantSMC
€ 35,99
Each
Aantal stuks
CJP2 Double 10mm 30mm 50 → 500mm/s 0.7 MPa - Rubber - M3 x 0.5 69.5 x 15 x 19mm 40g 50mm/s -
RS-stocknr. 844-4477
FabrikantnummerNCDJ2B16-500-B
FabrikantSMC
€ 50,20
Each
Aantal stuks
NCJ2 Double 15.88mm 127mm 50 → 750mm/s 0.7 MPa 1MPa Rubber - 10-32 UNF 7.95 x 0.71 x 0.71in 61g 50mm/s -
RS-stocknr. 547-574
FabrikantnummerCDJP2B16-15D
FabrikantSMC
€ 38,26
Each
Aantal stuks
CJP2 Double 16mm 15mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 58.5 x 20 x 24.5mm 50g 50mm/s -
RS-stocknr. 264-6153
FabrikantnummerCJ1B4-15SU4
FabrikantSMC
€ 20,15
Each
Aantal stuks
CJ1 Single 4mm 15mm 50 → 500mm/s 0.7 MPa - Not Cushioned - U4 5 (Dia.) x 58mm 5.6g 50mm/s 5mm
RS-stocknr. 844-4486
FabrikantnummerNCDJ2D10-100-B
FabrikantSMC
€ 32,99
Each
Aantal stuks
NCJ2 Double 9.53mm 25.4mm 50 → 750mm/s 0.7 MPa 1MPa Rubber - 10-32 UNF 3.91 x 0.47 x 0.47in 50.6g 50mm/s -
RS-stocknr. 547-578
FabrikantnummerCDJP2B16-30D
FabrikantSMC
€ 40,83
Each
Aantal stuks
CJP2 Double 16mm 30mm 50 → 500mm/s 0.7 MPa - Rubber - M5 x 0.8 73.5 x 20 x 24.5mm 63g 50mm/s -
RS-stocknr. 890-3241
FabrikantnummerCDJ2B16-100Z-B
FabrikantSMC
€ 54,53
Each
Aantal stuks
- Double 16mm 100mm 50 → 750mm/s 0.7 MPa 1.05MPa Rubber - M5 x 0.8 175 x 18 x 18mm 55g 50mm/s -
RS-stocknr. 264-6125
FabrikantnummerCJ1B4-5SU4
FabrikantSMC
€ 18,29
Each
Aantal stuks
CJ1 Single 4mm 5mm 50 → 500mm/s 0.7 MPa - Not Cushioned - U4 5 (Dia.) x 40mm 3.7g 50mm/s 5mm
Nieuw
RS-stocknr. 202-3150
FabrikantnummerEGZ-6-5
FabrikantFesto
€ 28,10
Each
Aantal stuks
EGZ Single 6mm 5mm - - - - - - - - - -
Related Products
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...
The MHS series parallel style air grippers have ...
Description:
The MHS series parallel style air grippers have been designed for applications requiring a high degree of accuracy in a wide range of environments. They use a wedge cam mechanism for the finger action giving high accuracy. The grippers are ...
The series CU free mount cylinder saves space ...
Description:
The series CU free mount cylinder saves space and allows direct and precise mounting, Options include auto-switch capabilities, free mount choices, recessed switch mounting grooves, non-rotating rod, single and double acting and rubber bumpers standard. Maximum operating pressure 7 bar, ...
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...