Spur Gears

The most common type of gears are spur gears, also known as straight-cut gears, and can be found in a multitude of applications. They have been specifically designed to transmit large amounts of power by placing them on parallel shafts which rotate in opposite directions.
Spur gears have an involute profile with straight teeth which project radially and are parallel to the rotation of the axis. This allows for a smoother operation between each gear and permits greater mounting distances. Spur gears can have a central hub or be hubless.
The standard pressure angles in spur gears are 14.5, 20 and 25 degrees, and refer to the angle that force is transmitted between the meshing gears.
Spur gears are capable of meshing with other gears, with many gears being used to create large gear reductions. When they are meshed the gear with the most teeth is referred to as the “gear”, whereas the one with smaller teeth is referred to as the “pinion”.
So what are the advantages?
• High transmission efficiency
• Compact and very easy to install
• Constant velocity ratio
• No slippage – unlike belt drives
• Highly reliable
• Can transmit large amounts of power
Types of spur gears
Plastic spur gears are commonly made from acetal or nylon and have many positive characteristics including being lightweight, non-rusting and quiet. They enable low cost and large production capabilities, and are also able to operate without lubrication. For hygiene reasons, plastic spur gears are an excellent choice for use in industries dealing with food production and medical equipment.
Metal spur gears have more strength, load-carrying capacity and heat resilience than their plastic counterpart. They are more dimensionally stable compared to plastic and can be made from many metals such as aluminium, brass and stainless steel.
Common applications
• Metal cutting machines
• Power plants
• Marine engines
• Mechanical clocks and watches
• Fuel pumps
• Washing machines
• Gear motors and gear pumps
• Rack and pinion mechanisms
• Material handling equipment
• Automobile gear boxes
• Steel mills
• Rolling mills
Spur gears are however very loud and so will not be found in vehicles. When the teeth collide with each other there is an impact noise which is really loud compared to the helical gears found in cars.

...
Lees meer Lees minder

Filters

41 - 60 van 313 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Module Number of Teeth Material Bore Diameter Hub Diameter Pitch Diameter Face Width
RS-stocknr. 878-7843
FabrikantRS PRO
€ 27,73
Each
Aantal stuks
0.5 50 Steel 4mm 10mm 25mm 4mm
RS-stocknr. 521-7641
FabrikantRS PRO
€ 11,44
Each
Aantal stuks
1 60 POM 8mm 18mm 60mm 6mm
RS-stocknr. 521-7001
FabrikantRS PRO
€ 3,00
Each
Aantal stuks
0.5 16 POM 3mm 6mm 8mm 3mm
RS-stocknr. 521-6222
FabrikantRS PRO
€ 9,19
Each
Aantal stuks
1 16 Steel 8mm 18mm 16mm 10mm
RS-stocknr. 521-7247
FabrikantRS PRO
€ 3,42
Each
Aantal stuks
0.8 15 POM 3mm 6mm 12mm 4mm
RS-stocknr. 521-6733
FabrikantRS PRO
€ 25,88
Each
Aantal stuks
1 22 Stainless Steel 8mm 18mm 22mm 10mm
RS-stocknr. 521-6597
FabrikantRS PRO
€ 19,13
Each
Aantal stuks
2 20 Steel 12mm 32mm 40mm 20mm
RS-stocknr. 521-6474
FabrikantRS PRO
€ 21,27
Each
Aantal stuks
1.5 32 Steel 10mm 40mm 48mm 15mm
RS-stocknr. 521-6301
FabrikantRS PRO
€ 10,98
Each
Aantal stuks
1 30 Steel 10mm 25mm 30mm 10mm
RS-stocknr. 521-6266
FabrikantRS PRO
€ 9,48
Each
Aantal stuks
1 24 Steel 8mm 20mm 24mm 10mm
RS-stocknr. 521-6575
FabrikantRS PRO
€ 18,09
Each
Aantal stuks
2 18 Steel 12mm 30mm 36mm 20mm
RS-stocknr. 521-7073
FabrikantRS PRO
€ 3,47
Each
Aantal stuks
0.5 32 POM 5mm 10mm 16mm 3mm
RS-stocknr. 878-7847
FabrikantRS PRO
€ 33,89
Each
Aantal stuks
0.5 60 Steel 4mm 10mm 30mm 4mm
RS-stocknr. 521-6294
FabrikantRS PRO
€ 13,84
Each
Aantal stuks
1 28 Steel 8mm 22mm 28mm 10mm
RS-stocknr. 878-7862
FabrikantRS PRO
€ 11,47
Each
Aantal stuks
0.8 18 Steel 5mm 12 14.4mm 6
RS-stocknr. 521-6244
FabrikantRS PRO
€ 10,85
Each
Aantal stuks
1 20 Steel 8mm 16mm 20mm 10mm
RS-stocknr. 521-6806
FabrikantRS PRO
€ 103,44
Each
Aantal stuks
1 100 Stainless Steel 12mm 60mm 100mm 10mm
RS-stocknr. 521-6323
FabrikantRS PRO
€ 16,20
Each
Aantal stuks
1 36 Steel 10mm 28mm 36mm 10mm
RS-stocknr. 521-7562
FabrikantRS PRO
€ 6,36
Each
Aantal stuks
1 35 POM 6mm 14mm 35mm 6mm
RS-stocknr. 878-7856
FabrikantRS PRO
€ 10,39
Each
Aantal stuks
0.8 12 Steel 4mm 11.2 9.6mm 6
Related Products
The RS PRO 2:1 metric moulded bevel gear ...
Description:
The RS PRO 2:1 metric moulded bevel gear is made from white HOSTAFORM®C. It has a pitch module of 1 and 15 teeth.Other Information:What are bevel gears?Bevel Gear is a cone-shaped gear, which transmits power between two intersecting axels.Why choose ...
The RS PRO 4:1 metric moulded bevel gear ...
Description:
The RS PRO 4:1 metric moulded bevel gear is made from white HOSTAFORM®C. It has a pitch module of 1.5 and 10 teeth.Other Information:What are bevel gears?Bevel Gear is a cone-shaped gear, which transmits power between two intersecting axels.Why choose ...
Injection moulded acetal co-polymer bevel gears. Tensile strength ...
Description:
Injection moulded acetal co-polymer bevel gears. Tensile strength 75N/mm2Hardness (Rockwell R) 110-120Pitch angle 63° 26' (gear) 26° 34' (pinion)Face angle 65° 36' (gear) 30° 29' (pinion).
Injection moulded acetal copolymer spur gears providing a ...
Description:
Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm2Hardness (Rockwell R) 110-12020° Pressure angle.