Pneumatic Air Dryers

Compressed air dryers, also known as pneumatic air dryers, are systems that are used to remove water vapour from compressed air. They are primarily used in pneumatic systems in industrial and commercial environments.

When air is compressed, the level of water and contaminants is increased also. It is essential to filter water in a compressed air system to ensure that it does not damage the equipment. Air dryers are also used to prevent downtime and increase the life of equipment.

Why are air dryers important?

Moisture can be dangerous for many pneumatic systems because it causes the wear and corrosion of parts. This can result in an increase in energy use. At some point, the damage caused by moisture in compressed air means that components need to be replaced or repaired. Pneumatic air dryers are designed to keep moisture out of your system and to save you from downtime or the cost of machine repairs.

Types of Air Dryer:

  • Refrigerant dryers, or refrigerated dryers, are a popular type of air dryer. Refrigerant drying works by cooling the compressed air and therefore converting any water vapour into condensation. This is a method used to separate the water and moisture from the air. This water is removed, away from the compressor. Refrigerated air dryers then heat the compressed air back to room temperature before it is released into the rest of the system.
  • Desiccant dryers, also known as adsorption dryers, use a specific material called desiccant to dry compressed air and remove the water vapour. They are a heatless-type of air dryer. Adsorption type dryers enable water to stick to the desiccant material which has a large surface area. Desiccant material does need to be dried or regenerated, however. So you will often find two towers containing desiccant which will take it in turns to dry the compressed air, while the other regenerates.

...
Lees meer Lees minder

Filters

1 - 20 van 25 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Manufacturer Series Type Inlet Port Size Outlet Port Size Dew Point Maximum Flow Rate Typical Flow Rate Electrical Supply Outlet Port - Thread Size Maximum Ambient Operating Temperature Minimum Ambient Operating Temperature Minimum Process Operating Temperature Ambient Operating Temperature Range Inlet Port - Thread Size
RS-stocknr. 667-9299
FabrikantnummerIDG1-F02
FabrikantSMC
€ 172,38
Each
Aantal stuks
IDG Membrane G 1/4 G 1/4 -20°C - 2.5 (Purge) L/min, 10 (Outlet) L/min - - +55°C -5°C -5°C -5 → +55°C -
RS-stocknr. 884-9241
FabrikantnummerIDG30LA-F03
FabrikantSMC
€ 969,70
Each
Aantal stuks
IDG Membrane G 3/8 G 3/8 -40°C 75 (Outlet) L/min, 93 (Inlet) L/min 75L/min - 3/8 +50°C -5°C -5°C -5 → +50°C 3/8
RS-stocknr. 843-6993
FabrikantnummerAMG-EL250
FabrikantSMC
€ 27,49
Each
Aantal stuks
AMG Element Assembly - - - - - - - +60°C +5°C +5°C +5 → +60°C -
RS-stocknr. 667-9286
FabrikantnummerIDFA3E-23
FabrikantSMC
€ 786,49
Each
Aantal stuks
IDFA Refrigerant Rc 3/8 Rc 3/8 - - 12 m³/h @ 3 °C, 15 m³/h @ 7 °C, 17 m³/h @ 10 °C - - +40°C +2°C +5°C +2 → +40°C -
RS-stocknr. 196-4429
FabrikantnummerHECR002-A5-F
FabrikantSMC
€ 3.843,50
Each
Aantal stuks
HECR Air Cooled - - - 2000L/min - 100 → 240V ac - - - - - 1/4in
RS-stocknr. 122-6786
FabrikantnummerCD0005
FabrikantParker
€ 572,10
Each
Aantal stuks
CD Membrane NPT 1/4 NPT 1/4 -22°C - - - 1/4in +49°C +2°C +4°C +2 → +49°C 1/4in
RS-stocknr. 667-9309
FabrikantnummerIDG3-F01
FabrikantSMC
€ 264,25
Each
Aantal stuks
IDG Membrane G 1/8 G 1/8 -20°C - 6 (Purge) L/min, 25 (Outlet) L/min - - +55°C -5°C -5°C -5 → +55°C -
RS-stocknr. 196-4430
FabrikantnummerHRS012-AF-20
FabrikantSMC
€ 4.488,54
Each
Aantal stuks
HRS Thermo Chiller - Rc 1/2 - 29L/min 7L/min 200 → 230V ac 1/2in - - - - -
RS-stocknr. 873-2550
FabrikantnummerIDG30A-F03
FabrikantSMC
€ 1.088,98
Each
Aantal stuks
IDG Membrane G 3/8 G 3/8 -20°C 360 (Inlet)L/min 300 (Outlet)L/min - 3/8 +50°C -5°C -5°C -5 → +50°C 3/8
RS-stocknr. 667-9315
FabrikantnummerIDG20-F02
FabrikantSMC
€ 804,18
Each
Aantal stuks
IDG Membrane G 1/4 G 1/4 -20°C - 50 (Purge) L/min, 200 (Outlet) L/min - - +55°C -5°C -5°C -5 → +55°C -
RS-stocknr. 196-4431
FabrikantnummerHRS050-AF-20
FabrikantSMC
€ 7.717,87
Each
Aantal stuks
HRS Thermo Chiller - Rc 1/2 - 42L/min 28L/min 200 → 230V ac 1/2in - - - - -
RS-stocknr. 884-9232
FabrikantnummerIDG30A-F03
FabrikantSMC
€ 969,70
Each
Aantal stuks
IDG Membrane G 3/8 G 3/8 -20°C 300 (Outlet) L/min, 360 (Inlet) L/min - - 42950 25°C -5°C -5°C -5 → +50°C 42950
RS-stocknr. 700-8783
FabrikantnummerIDG5-F01-S
FabrikantSMC
€ 368,56
Each
Aantal stuks
IDG Membrane G 1/8 G 1/8 -20°C - 12 (Purge) L/min, 50 (Outlet) L/min - - +55°C -5°C -5°C -5 → +55°C -
RS-stocknr. 667-9306
FabrikantnummerIDG10-F02
FabrikantSMC
€ 691,22
Each
Aantal stuks
IDG Membrane G 1/4 G 1/4 -20°C - 25 (Purge) L/min, 100 (Outlet) L/min - - +55°C -5°C -5°C -5 → +55°C -
RS-stocknr. 202-3160
FabrikantnummerMS6-LDM1-1/4-P20
FabrikantFesto
€ 870,02
Each
Aantal stuks
MS - - - - 200L/min - - 0.5 - - - - -
RS-stocknr. 196-4432
FabrikantnummerHRS050-AF-20-M
FabrikantSMC
€ 8.692,93
Each
Aantal stuks
HRS Thermo Chiller - Rc 1/2 - 42L/min 28L/min 200 → 230V ac 1/2in - - - - -
RS-stocknr. 202-3254
FabrikantnummerMS6-LDM1-1/2-P40
FabrikantFesto
€ 1.021,12
Each
Aantal stuks
MS - - - - 400L/min - - 0.5 - - - - -
RS-stocknr. 203-1279
FabrikantnummerLDM1-1/2-D-MAXI-600
FabrikantFesto
€ 1.828,68
Each
Aantal stuks
D Membrane Dryer G 1/2 G 1/2 +20 K 600L/min - - 1/2 +50°C +2°C - - -
RS-stocknr. 202-3159
FabrikantnummerMS6-LDM1-1/2-P20
FabrikantFesto
€ 870,02
Each
Aantal stuks
MS - - - - 200L/min - - 0.5 - - - - -
RS-stocknr. 196-4433
FabrikantnummerHRSE018-A-23
FabrikantSMC
€ 4.179,84
Each
Aantal stuks
HRSE Thermo Chiller - Rc 1/2 - 7L/min - 230V ac 1/2in - - - - -