ESD Continuous Monitors

ESD continuous monitors, or constant monitors, continuously check for electrostatic discharge (ESD) on work surfaces. This is important for preventing damage to sensitive electronic equipment or to monitor discharge in areas where there is a danger of igniting flammable liquids or gases. Other grounding components such as wrist straps, ESD safe matsand ESD grounding cordscan be attached to the monitors, connecting work surfaces and operators.

LEDs (light emitting diodes) indicate different colours to alert users if there is a discharge, sometimes accompanied by an audible alarm.

What are ESD continuous monitors used for?

ESD continuous monitors save set-up time, ensuring integrity of the entire ground loop, meaning wrist straps and other ESD accessories don’t need to be checked individually at the start of a shift.

Types of ESD continuous monitors

Some monitors not only detect static electricity, but also actively eliminate it by balancing ions. This type of continuous monitor is called an ’ioniser’, ’ionising bar’ or ’static bar’.

Monitors can be connected to one or two wrist straps and one or two work surfaces, plus grounding. Terminal types and supply voltages vary. Some products include EOS (electrical overstress) detection and/or charge detection.

Lees meer Lees minder


1 - 8 van 8 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Terminal Type Supply Voltage Height Number of Operators Length Number of Worksurfaces Width Supervisor Monitoring Parking Station Charge Detection EOS Detection Complies with EN 61340-5-1
RS-stocknr. 126-8845
€ 275,70
Aantal stuks
Jack 100 → 240V ac 22 mm 1 66mm 1 61mm No No Yes Yes Yes
RS-stocknr. 685-8760
FabrikantDesco EMIT
€ 77,66
Aantal stuks
- 220V ac - - - - - - - - - Yes
RS-stocknr. 685-8763
€ 429,97
Aantal stuks
Phone 220V ac - 2 - 2 - Yes Yes No No Yes
RS-stocknr. 168-5578
€ 249,20
Aantal stuks
Snap, 10 mm Jack, 10 mm Snap 24 V dc, 100 → 240 V ac 23 mm 1 70mm 1 53mm - - - Yes -
RS-stocknr. 700-8843
€ 402,79
Aantal stuks
Crimp 24V dc 13 mm - 87.5mm - 16.6mm - - - - -
RS-stocknr. 126-8851
FabrikantRS PRO
€ 266,63
Aantal stuks
Banana 5V dc 30 mm 1 61mm 1 69mm Yes No No Yes Yes
RS-stocknr. 174-6529
€ 297,76
Aantal stuks
- 100 → 240V ac/dc 23 mm 1 98mm 1 53mm - Yes - - -
RS-stocknr. 918-5618
€ 205,21
Aantal stuks
Snap 100 → 120V ac 35 mm 1 165mm 1 79mm No No No No Yes
Related Products
The SCS ESD grounding cord is the 2300 ...
The SCS ESD grounding cord is the 2300 series, dual conductor coil card. It has 3.4mm right angle mono plug which is designed to use with dual wire wristband and dual wire continuous monitors. If one conductor is damaged, the ...
Dual wire wrist strap from Menda. Dual wire ...
Dual wire wrist strap from Menda. Dual wire wrist strap provides redundancy - even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire. Used with resistive loop technology to continuously monitor and verify ...