Crystals, Oscillators & Resonators

We have a wide range of crystals, resonators and oscillators from leading manufacturers such as Abracon, Murata, Interquip, EPCOS and AVX, to suit all applications.

What are Crystals, Oscillators and Resonators?

A Crystal creates an electric charge when pressure is applied to certain materials, such as quartz, and is known as the piezoelectric effect. It’s a passive component that produces a very precise frequency output and is often used with oscillators to provide an accurate timing device in digital integrated circuits.

An Oscillator is an electronic or mechanical device which produces a regular oscillating output in the form of energy, often as a sine or square wave. They are used in microcontrollers, clocks, and computers to name a few.

A Resonator is used to control timing devices by generating a clock signal in oscillating circuits, particularly in microprocessors.

Types available include:

  • Ceramic Resonators – These are used to create a clock signal with a specific frequency to control the timing in oscillating circuits. Commonly used in TVs, phones, medical equipment and computers.
  • Crystal Oscillators – Similar to the Ceramic Resonator, these are normally more cost effective and compact, offering higher stability.
  • Crystal Units – Available in a wide range of frequencies. Crystal units have a very accurate frequency with tight tolerance and offer long term stability, and are used as resonators in crystal oscillator circuits.
  • Silicon Oscillators – Brands include Linear Technology, Maxim, Abracon and Microchip Technology offering a comprehensive range.
  • Sine Wave Oscillators – Used in circuits for test waveforms
  • Voltage Controlled Oscillators – These vary the DC voltage input to help control oscillation frequency. There are two types – Linear, which generates a sinusoidal waveform and Relaxation, which creates a triangular waveform. These are typically used in applications such as frequency synthesisers, electronic jamming equipment and function generators.

What are Crystals, Oscillators and Resonators used for?

These are commonly used as timing devices in applications such as computers, watches, phones, microprocessors, digital circuits and microcontrollers.

Related Products
14 pin Dual-in-Line HCMOS Clock Oscillator. Industry-standard 14 ...
14 pin Dual-in-Line HCMOS Clock Oscillator. Industry-standard 14 pin DIL package for compatibilityHermetically sealed package for reliability and low agingTristate function (Enable/Disable).
Abracon ABS07W series IoT optimized SMD crystals operate ...
Abracon ABS07W series IoT optimized SMD crystals operate at 32.768 kHz frequency with a low plating load of 3 pF. These crystals are optimized for ESR over an extended operating temperature Ranging from -40 ºC to 85 ºC.These crystals are ...
Abracon AB38T series is a commercial grade low ...
Abracon AB38T series is a commercial grade low frequency cylindrical watch crystal 32.768kHz. Real-time clockClock source for communication or A/V equipment.Measuring instruments.
The Murata XCRGB Series are tiny (2.0mm x ...
The Murata XCRGB Series are tiny (2.0mm x 1.6mm x 0.7mm), RoHS compliant hybrid crystal resonators with four connection pads on the base allowing there use on existing 3225 and 2520 board layouts and are available in frequencies ranging from ...