Multimeter Test Leads

Multimeter test leads are considered to be an integral part of electrical measurement, for example connecting your digital multimeter to the unit under test. If the test leads are in poor condition this can lead to inaccurate readings and could result in a health and safety concern if live wires are being read as being de-energised.

A lead kit for measuring high voltage and high energy circuits, such as distribution system voltages (240V- 600V), needs to be in good condition with the proper markings and ratings. You should always take precautionary steps to verify the condition and rating of the leads before testing to ensure safety in the workplace.

There are test lead sets designed to meet the requirements of nearly all applications.

Checks before you start:

  • Confirm that the multimeter and multimeter test leads are rated for the category and voltage level appropriate for the electrical environment they will be used in. Electrical measurement category ratings are defined by the safety standard, IEC61010 and have four ratings, CAT I, CAT II, CAT III and CAT IV.
  • Inspect the leads to make sure they are safe to use and able to conduct electrical signals accurately. This includes checking that the leads are properly insulated with no cracks through the cables and also checking the connectors are clean and debris-free.
  • Complete a visual inspection first then conduct simple ohms measurement to confirm they are electrically reliable and able to carry a signal within allowable loss parameters.

  • ...
    Lees meer Lees minder

    Filters

    1 - 20 van 42 producten worden weergegeven
    Resultaten per pagina
    Omschrijving Prijs Lead Type Product Type Connector Type Fused Lead Length Current Rating Safety Category Voltage Safety Category Minimum Operating Temperature Maximum Operating Temperature Calibrated Safety Category Level
    RS-stocknr. 741-4358
    FabrikantnummerTL175
    FabrikantFluke
    € 30,00
    Each
    Aantal stuks
    Test Lead Kit - Shrouded - - 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V -20°C +55°C - CAT III, CAT IV
    RS-stocknr. 726-3615
    FabrikantnummerTL71-1
    FabrikantFluke
    € 30,00
    Each
    Aantal stuks
    Test Lead Kit - Right Angle - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-stocknr. 705-1276
    FabrikantnummerTL175E
    FabrikantFluke
    € 33,00
    Each
    Aantal stuks
    Test Lead - 4 mm Banana Plug - 1.2m 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V - - - CAT II, CAT III
    RS-stocknr. 450-2358
    FabrikantnummerTL224
    FabrikantFluke
    € 33,00
    Each
    Aantal stuks
    Silicone Test Lead Set - Banana Plug - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-stocknr. 726-3624
    FabrikantnummerTL75-1
    FabrikantFluke
    € 25,00
    Each
    Aantal stuks
    Test Lead Kit - Banana Plug - 1.22m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-stocknr. 468-7415
    FabrikantnummerTL76
    FabrikantFluke
    € 43,00
    Each
    Aantal stuks
    Test Lead Kit - Banana Plug, Shrouded 4 mm - 1.5m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-stocknr. 324-5975
    FabrikantnummerTL81A
    FabrikantFluke
    € 165,00
    Each
    Aantal stuks
    Electronic Test Lead Kit - Crocodile Clip, Hook Clip - 1m 3 A, 5 A, 10 A 300V CAT II 300 V - - - CAT II
    RS-stocknr. 493-3285
    FabrikantnummerTP88
    FabrikantFluke
    € 15,00
    1 Set
    Set(s)
    Rigid Back Probe Pin Set - 2 mm - 2in - 60V dc - - - - -
    RS-stocknr. 412-119
    FabrikantnummerFLUKE TLK287
    FabrikantFluke
    € 175,00
    Each
    Aantal stuks
    Electronic Master Test Lead Kit - Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug - - 2 A, 5 A, 10 A 300 V, 1000 V CAT II 300 V, CAT III 1000 V - - - CAT II, CAT III
    RS-stocknr. 726-3633
    FabrikantnummerTL220-1
    FabrikantFluke
    € 83,00
    Each
    Aantal stuks
    Industrial Test Lead Kit - Crocodile Clip, Right Angle to Right Angle - 1.6m 10A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-stocknr. 412-129
    FabrikantnummerFLUKE TLK289 EUR
    FabrikantFluke
    € 175,00
    Each
    Aantal stuks
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - 1.5m 3 A, 10 A 600 V, 1000 V CAT III 1000 V, CAT IV 600 V - - - CAT III, CAT IV
    RS-stocknr. 436-866
    FabrikantnummerTLK289
    FabrikantFluke
    € 162,00
    Each
    Aantal stuks
    Industrial Test Lead Kit - Crocodile Clip, Hook Clip, Shrouded 4 mm - - - - - - - - -
    RS-stocknr. 731-8982
    FabrikantnummerTL80A-1
    FabrikantFluke
    € 79,00
    Each
    Aantal stuks
    Electronic Test Lead Kit - Crocodile Clip - 1m 3 A, 5 A 300V CAT II 300 V - - - CAT II
    RS-stocknr. 705-1285
    FabrikantnummerTP175E
    FabrikantFluke
    € 23,00
    Each
    Aantal stuks
    Test Probe - Lantern - - 10A 1000V CAT II, CAT II 1000 V, CAT III 1000 V -20°C +55°C - CAT II, CAT III
    RS-stocknr. 468-7358
    FabrikantnummerL215
    FabrikantFluke
    € 97,00
    Each
    Aantal stuks
    SureGrip Kit with Probe Light & Extender - - - - - - - - - - -
    RS-stocknr. 442-8294
    Fabrikantnummer80K-40
    FabrikantFluke
    € 309,00
    Each
    Aantal stuks
    High Voltage Probe - Banana Plug - - 20µA 40000V CAT I 40000 V - - - CAT I
    RS-stocknr. 442-8301
    Fabrikantnummer80K-6
    FabrikantFluke
    € 172,00
    Each
    Aantal stuks
    High Voltage Probe - Banana Plug - - - 6000V CAT I 6000 V 0°C +50°C - CAT I
    RS-stocknr. 480-2399
    Fabrikantnummer80BK-A
    FabrikantFluke
    € 39,00
    Each
    Aantal stuks
    Integrated DMM Probe - Banana Jack - - - - - - - - -
    RS-stocknr. 726-3630
    FabrikantnummerTP220-1
    FabrikantFluke
    € 21,00
    Each
    Aantal stuks
    Test Probe Kit - - - - 10A 1000V CAT II 1000 V - - - CAT II
    RS-stocknr. 911-9721
    Fabrikantnummer80K-6
    FabrikantFluke
    € 242,00
    Each
    Aantal stuks
    High Voltage Probe - Banana Plug - - - 6000V CAT I 6000 V 0°C +50°C RSCAL CAT I