RF Detectors

What is an RF Detector?

An RF detector monitors or samples the output of an RF circuit and develops a dc output voltage proportional to the power at that point. RF power, rather than voltage is the primary measure of a wireless signal. In a receiver, signal strength is a key factor in maintain reliable communications.

RF detectors are used primarily to measure and control RF power in wireless systems.

Different types of RF Detectors

There are two basic types

• Logarithmic type: converts the input RF power into a dc voltage proportional to the log of the input
• RMS type: creates a dc output proportional to the RMS value of the signal

Selecting the right RF detector

The type of RF signal to be measured is the most important determining factor in the type of detector to use. For most general power measurement and control applications, the log type is the most useful. For pulsed RF signals, the log type is also best because of the fast response times available. Applications where the signal has a high or varying crest factor (measure of a waveform, ratio of the peak values to RMS value of the signal) the RMS type is better.

Applications include
• Transmit/Receive Power Measurement
• Input Protection
• Return Loss Measurement
• RF Pulse Detection
• Precise RF Power Measurement in Test and Measurement
• Materials Analysis
• Healthcare
• Security systems
• Traffic management

RF detectors are an ideal tool for the measurement of radio frequency (RF) signals as they locate all RF signals.

...
Lees meer Lees minder

Filters

1 - 9 van 9 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Maximum Frequency Minimum Frequency Frequency Sensitivity Output Polarity Connector Type Dimensions Weight Maximum Operating Temperature Minimum Operating Temperature Height Length Model Number p Width
RS-stocknr. 912-8264
FabrikantnummerAD8312ACBZP2
FabrikantAnalog Devices
€ 1,635
Each (On a Reel of 250)
Aantal stuks
- - - - - - - - - - - - -
RS-stocknr. 160-2668
FabrikantnummerHMC611LP4E
FabrikantAnalog Devices
€ 15,934
Each (On a Reel of 50)
Aantal stuks
10GHz 1 MHz - - - 4.1 x 4.1 x 1mm - +85°C -40°C 1mm 4.1mm HMC611LP4E 4.1mm
RS-stocknr. 862-6180
FabrikantnummerHMC611LP4E
FabrikantAnalog Devices
€ 18,88
Each
Aantal stuks
10GHz 1 MHz - - - 4.1 x 4.1 x 1mm - +85°C -40°C 1mm 4.1mm HMC611LP4E 4.1mm
RS-stocknr. 810-0057
FabrikantnummerAD8312ACBZ-P7
FabrikantAnalog Devices
€ 1,62
Each (In a Pack of 2)
Aantal stuks
3.5GHz 50 MHz 49dB Positive - 1.5 x 1 x 0.38mm - +85°C -40°C 0.38mm 1.5mm AD8312 1mm
RS-stocknr. 168-4303
FabrikantnummerAD8312ACBZ-P7
FabrikantAnalog Devices
€ 1,581
Each (On a Reel of 3000)
Aantal stuks
3.5GHz 50 MHz 49dB Positive - 1.5 x 1 x 0.38mm - +85°C -40°C 0.38mm 1.5mm AD8312 1mm
RS-stocknr. 187-3714
FabrikantnummerSNYPER-LTE+ SPECTRUM (EU)
FabrikantSiretta
€ 904,80
Each
Aantal stuks
2.6GHz 700 MHz - - - 76 x 36 x 141mm 200g +50°C -10°C 141mm 76mm SNYPER-LTE Spectrum 36mm
Nieuw
RS-stocknr. 202-4070
FabrikantnummerSNYPER-LTEM GRAPHYTE (GL)
FabrikantSiretta
€ 907,67
Each
Aantal stuks
2.3GHz 0.7 GHz - - - - - - - - - - -
RS-stocknr. 176-7071
FabrikantnummerSNYPER-LTE GRAPHYTE
FabrikantSiretta
€ 1.170,44
Each
Aantal stuks
1800 (2G) MHz, 2100 (3G & 4G) MHz 800 (4G) MHz, 900 (2G & 3G) MHz - - SMA Male 147 x 76 x 36mm 200g +50°C -10°C 36mm 147mm - 76mm
RS-stocknr. 187-3713
FabrikantnummerSNYPER-LTE+ (EU)
FabrikantSiretta
€ 749,36
Each
Aantal stuks
2.6GHz 700 MHz - - - 76 x 36 x 141mm 200g +50°C -10°C 141mm 76mm SNYPER-LTE 36mm
Related Products
Wireless PIR motion sensors function as a presence ...
Description:
Wireless PIR motion sensors function as a presence or absence detector and can turn lights on when a room is occupied or off when the room is empty. All units contain a built in RF transceiver capable of receiving input ...
RS PRO three axis RF field strength meter ...
Description:
RS PRO three axis RF field strength meter IM-195 is a great value instrument designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength. It is capable of measuring frequency range 50 MHz to 3.5 GHz with triple axis ...
SEEIT present an electrosmog power meter the TM-195 ...
Description:
SEEIT present an electrosmog power meter the TM-195 it is designed for measuring RF Radio Frequency and high frequencies. The monitor will range between 50MHz to 3500MHz with triple axis X, Y and Z isotropic sensors. The TM195 can record ...
The ADL5902-EVALZ, from Analog Devices, is an evaluation ...
Description:
The ADL5902-EVALZ, from Analog Devices, is an evaluation board for the ADL5902 device. The ADL5902 us a TruPwr™ true rms responding power detector that has a 65 dB measurement range when driven with a single-ended 50 Ω source.The ADL5902-EVALZ is ...