Punch Sets

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metal working, a set of punch tools allows the operator to drive objects into the material, or form an impression on a work piece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.The RS range of punch sets includes several different types to suit your needs.Centre PunchA common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.Drift PunchSometimes referred to as a pokey, this punch tool is often used for enlarging preciously made holes. It can also be used for aligning holes prior to bolting.Parallel Pin PunchA parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.Spring Pin PunchSpring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches, and are specially shaped to remove roll pins without causing damage or becoming jammed. Wad PunchWad punches have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.Anti-VibrationWith shock absorbing rubber handle, this punch not only offers the user maximum safety and comfort, but also prevents clipping.

...
Lees meer Lees minder

Filters

1 - 20 van 70 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS-stocknr. 541-7223
FabrikantRS PRO
€ 35,53
Each
Aantal stuks
- - 10 - Wad
RS-stocknr. 494-076
Fabrikantnummer4-18-299
FabrikantStanley
€ 29,07
Each
Aantal stuks
Starter Punch: 140; Centre Punch: 101; 114; Pin Punch: 152; Cold Chisel: 141; 152; 171 mm - 12 - -
RS-stocknr. 381-4896
FabrikantRS PRO
€ 22,63
1 Set
Set(s)
4 in - 5 - Centre
RS-stocknr. 505-8688
FabrikantRS PRO
€ 23,22
Each
Aantal stuks
150 mm - 6 - Parallel Pin
RS-stocknr. 220-0662
Fabrikantnummer249.GPB
FabrikantFacom
€ 42,92
1 Set
Set(s)
55 mm - 5 - Anti-Vibration
RS-stocknr. 381-4903
FabrikantRS PRO
€ 37,37
1 Set
Set(s)
4 in 1/16 in, 1/4 in, 1/8 in, 3/16 in, 3/32 in, 5/16 in, 5/32 in, 7/32 in 8 - Parallel Pin
RS-stocknr. 264-2426
Fabrikantnummer47A
FabrikantStanley
€ 52,60
1 Set
Set(s)
4-3/8; 4-13/16; 5-1/4; 5-9/16; 5-7/8; 6-3/8; 6-3/4 in 1/4; 1/4; 5/16; 5/16; 3/8; 7/16; 1/2 in 7 - -
RS-stocknr. 626-1497
FabrikantRS PRO
€ 26,93
Each
Aantal stuks
40 mm, 50 mm 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm 6 - Drift
RS-stocknr. 452-9634
Fabrikantnummer217.GJ1
FabrikantFacom
€ 148,07
1 Box of 1
Box(es)
60; 40; 100; 20; 20 mm Steel Tips: 10; 12; 14; 16; 18: Brass Tips: 12; 16; 20: Polyamide Tips: 12; 16; 20: Brass Tips For Extension: 12; 16; 18; Polyamide Tip For Extension: 12; 16; 18 mm 19 - Anti-Vibration
RS-stocknr. 125-3901
Fabrikantnummer316D
FabrikantGedore
€ 21,72
Each
Aantal stuks
- 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm 6 - Parallel Pin
RS-stocknr. 456-3640
FabrikantRS PRO
€ 22,53
Each
Aantal stuks
150 mm - 6 - Parallel Pin
RS-stocknr. 733-738
Fabrikantnummer351WRS
FabrikantEclipse
€ 22,06
1 Set
Set(s)
100 mm - 4 - Centre
RS-stocknr. 530-722
FabrikantnummerMODM.CG
FabrikantFacom
€ 149,95
Each
Aantal stuks
- Drift Punches: 2; 3; 4; 5; 6; 8; Nail Punches: 4; 5; 6; 8 mm 11 - -
RS-stocknr. 784-5932
Fabrikantnummer249.GJ7
FabrikantFacom
€ 78,73
Each
Aantal stuks
140 mm, 150 mm, 190 mm, 200 mm, 210 mm, 216 mm, 230 mm 8 mm, 10 mm, 12 mm, 14 mm 7 - Anti-Vibration
RS-stocknr. 772-4396
Fabrikantnummer119L
FabrikantGedore
€ 41,23
Each
Aantal stuks
175 mm - 6 - -
RS-stocknr. 282-805
FabrikantnummerJ46
FabrikantStanley Proto
€ 184,30
Each
Aantal stuks
4 3/4 → 10 in 3/16 → 7/8 in 26 - -
RS-stocknr. 510-153
FabrikantnummerDX620
FabrikantStarrett
€ 30,67
Each
Aantal stuks
89 mm - 5 - -
RS-stocknr. 281-3527
Fabrikantnummer249.G
FabrikantFacom
€ 52,07
Each
Aantal stuks
55 mm - 5 - Anti-Vibration
RS-stocknr. 381-4919
FabrikantRS PRO
€ 33,20
1 Set
Set(s)
205 mm 3.2 mm, 4.8 mm, 6.3 mm, 8 mm, 9.5 mm 5 - Parallel Pin
RS-stocknr. 772-4400
Fabrikantnummer106 D
FabrikantGedore
€ 34,39
Each
Aantal stuks
150 mm 10 mm 6 60° -
Related Products
A set of 100 alpha-numeric characters (3 mm ...
Description:
A set of 100 alpha-numeric characters (3 mm height) made from high quality hardened tool steel (characters hardened to 58-62 Rockwell C) to give clear, consistent marking throughout a long life. The set includes 12 blanks which may be used ...
Hand punches for permanent identification markingHardened and tempered ...
Description:
Hand punches for permanent identification markingHardened and tempered to give long life and maximum securityCapable of indenting material up to 40 Rockwell C hardnessSupplied in sturdy plastic boxes.
Our RS high quality, shock resistant tool steel ...
Description:
Our RS high quality, shock resistant tool steel range of dot letter and number punch sets are one of the simplest forms of marking. The punch sets are robust and give clear, permanent and consistent results on different materials where ...
Each punch is hardened, tempered and ground with ...
Description:
Each punch is hardened, tempered and ground with a chemically blackened knurled body. 6 punches for inserting and extracting spring tension pins.Raised pilot end for locating into pinsSuitable for spiral wrapped spring tension pinsMade from tool steel with hardened tipsSupplied ...