End Mills

An end mill is a type of cutting tool that is used in milling applications.
They have cutting edges on the end and sides of the shank enabling them to cut in all directions.
The purpose of an end mill
The end mill remove material by their movement within the milling machine or from the cutter’s shape.
The number of flutes (spirals on the end mill) give different results
• 2 flute allows maximum space for chip ejection and is used for general milling operations
• 3 flute is an excellent choice for slotting, it has a larger cross section and is used in general milling operations
• 4, 5, 6 and 8 flute can improve the surface finish if the feed rate remains the same. A greater number of flutes reduces chip load and produces a much finer finish
End cut types
• Centre cutting end mills have one or more cutting edges at the tip to allow the user to plunge, drill or ramp into a cut.
• Non-Centre cutting end mills have peripheral teeth that allow the user to side cut or contour an external surface.

Shank Types
• End mills with a plain shank are used with a collet style holder and are the most common shank type
• End mills with a Weldon shank have one or two flats with set screws in the holder that tighten on the flanks of flats to hold the mill to prevent it from rotating

Typical applications
End mills are used for profiling milling, face milling, tracer milling, semi-finishing and finishing.

...
Lees meer Lees minder

Filters

1 - 20 van 87 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Cutter Diameter Cut Length Number of Flutes Material Overall Length Shank Type Shank Diameter Centre Cutting Diameter Tolerance
RS-stocknr. 523-0436
FabrikantRS PRO
€ 8,53
Each
Aantal stuks
1mm 2mm 3 HSCo 24.5 mm Weldon 6 mm - -
RS-stocknr. 666-6693
FabrikantnummerS9043.0
FabrikantDormer
€ 14,00
Each
Aantal stuks
3mm 12mm 4 Solid Carbide 38 mm Plain 3 mm Yes H12
RS-stocknr. 728-7831
FabrikantnummerC2471/8
FabrikantDormer
€ 38,59
Each
Aantal stuks
1/8in 10mm 4 HSS-E-PM 54 mm Weldon 6 mm - K10
RS-stocknr. 728-7844
FabrikantnummerC2471/4
FabrikantDormer
€ 55,84
Each
Aantal stuks
1/4in 16mm 4 HSS-E-PM 66 mm Weldon 10 mm - K10
RS-stocknr. 359-6784
FabrikantnummerC273-2.00
FabrikantDormer
€ 27,51
Each
Aantal stuks
2mm 10mm 4 HSCo 54 mm Weldon 6 mm Yes K10
RS-stocknr. 666-6713
FabrikantnummerS9048.0
FabrikantDormer
€ 25,50
Each
Aantal stuks
8mm 19mm 4 Solid Carbide 63 mm Plain 8 mm Yes H12
RS-stocknr. 666-6710
FabrikantnummerS90410.0
FabrikantDormer
€ 35,30
Each
Aantal stuks
10mm 22mm 4 Solid Carbide 72 mm Plain 10 mm Yes H12
RS-stocknr. 523-0537
FabrikantRS PRO
€ 7,69
Each
Aantal stuks
2mm 4.5mm 3 HSS 29 mm Weldon 6 mm - -
RS-stocknr. 523-0600
FabrikantRS PRO
€ 7,69
Each
Aantal stuks
6mm 16mm 3 HSS 48 mm Weldon 6 mm - -
RS-stocknr. 666-6700
FabrikantnummerS9046.0
FabrikantDormer
€ 18,80
Each
Aantal stuks
6mm 19mm 4 Solid Carbide 57 mm Plain 6 mm Yes H12
RS-stocknr. 728-7989
FabrikantnummerC2478.0
FabrikantDormer
€ 51,30
Each
Aantal stuks
8mm 19mm 4 HSCo 69 mm Weldon 10 mm Yes K10
RS-stocknr. 523-0521
FabrikantRS PRO
€ 8,59
Each
Aantal stuks
1.5mm 4mm 3 HSS 28 mm Weldon 6 mm - -
RS-stocknr. 666-6697
FabrikantnummerS9044.0
FabrikantDormer
€ 16,00
Each
Aantal stuks
4mm 14mm 4 Solid Carbide 50 mm Plain 4 mm Yes H12
RS-stocknr. 728-7986
FabrikantnummerC24710.0
FabrikantDormer
€ 50,94
Each
Aantal stuks
10mm 22mm 4 HSCo 72 mm Weldon 10 mm Yes K10
RS-stocknr. 728-7897
FabrikantnummerC2731/4
FabrikantDormer
€ 108,70
Each
Aantal stuks
1/4in 30mm 4 HSS-E-PM 80 mm Weldon 10 mm - K10
RS-stocknr. 523-0571
FabrikantRS PRO
€ 7,69
Each
Aantal stuks
4mm 9.5mm 3 HSS 39 mm Weldon 6 mm - -
RS-stocknr. 728-8005
FabrikantnummerC24716.0
FabrikantDormer
€ 90,19
Each
Aantal stuks
16mm 32mm 4 HSCo 92 mm Weldon 16 mm Yes K10
RS-stocknr. 728-7998
FabrikantnummerC24714.0
FabrikantDormer
€ 75,12
Each
Aantal stuks
14mm 26mm 4 HSCo 83 mm Weldon 12 mm Yes K10
RS-stocknr. 728-7995
FabrikantnummerC24712.0
FabrikantDormer
€ 60,19
Each
Aantal stuks
12mm 26mm 4 HSCo 83 mm Weldon 12 mm Yes K10
RS-stocknr. 728-7888
FabrikantnummerC2734.0
FabrikantDormer
€ 44,51
Each
Aantal stuks
4mm 19mm 4 HSCo 63 mm Weldon 6 mm Yes K10
Related Products
A range of standard length and long series ...
Description:
A range of standard length and long series Clarkson Osborn FC3 throw-away milling cutters. Manufactured from High Speed Cobalt steel (HSSE) and intended for use in Clarkson FC3 Holders and adaptors.
HSCo-XP flatted shank end mill for machining profiles ...
Description:
HSCo-XP flatted shank end mill for machining profiles and steps, as well as finishing operations in most materials. Manufactured from Powder Metallurgy Cobalt Steel for increased wear resistance and tool lifeSuperior edge strength and rigidity resulting in improved surface finish ...
HSCo-XP flatted shank for machining profiles and steps, ...
Description:
HSCo-XP flatted shank for machining profiles and steps, as well as finishing operations in most materials. Manufactured from Powder Metallurgy Cobalt Steel for increased wear resistance and tool lifeSuperior edge strength and rigidity resulting in improved surface finish and slot ...
PENTA HF High Feed Milling Cutter for high ...
Description:
PENTA HF High Feed Milling Cutter for high metal removal rates when face milling. Insert geometry and approach angle reduces power requirementsOption of cylindrical shank or bore cutterSuitable for PDKX 09 / PDMX 09 / PDKT 09 / PDMW 09 ...