Cutters

Cutters are a hand held tool for cutting different materials.
Typical Types of Cutters
• Diagonal cutters are also known as side cutters. They are ideal for gripping, splicing or cutting wires, and strip insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife.
• End cutters also known as nippers are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat bladed head which lets you cut close against the surface without digging into it.
• Wire rope cutters for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable.
• Bolt cutters are designed to send a large amount of torque to the cutting head to make cutting metal locks easy.
• Snipe nose or needle nose cutters are designed to hold and cut.

...
Lees meer Lees minder

Filters

21 - 40 van 227 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Hard Wire Cutting Capacity Iron Wire
RS-stocknr. 815-6394
Fabrikantnummer77 32 120 H ESD
FabrikantKnipex
€ 118,95
Each
Aantal stuks
- - Electronics Diagonal Cutters 120 mm 14mm - - Yes Carbide 0.6mm - - 0.6mm -
RS-stocknr. 442-0925
Fabrikantnummer26 12 200 SB
FabrikantKnipex
€ 25,20
Each
Aantal stuks
- - Snipe Nose Cutting Pliers 200 mm 73mm - - - Vanadium Electric Steel 3.2mm - - 2.2mm -
RS-stocknr. 601-0665
Fabrikantnummer62 12 120
FabrikantKnipex
€ 35,20
Each
Aantal stuks
- - Electronics Diagonal Cutters 120 mm 10mm - - - Tool Steel 1mm - - - -
RS-stocknr. 834-7997
Fabrikantnummer3-961-15
€ 50,40
Each
Aantal stuks
- - Electronics Diagonal Cutters 120 mm - - - Yes Chrome Vanadium Steel 1.3mm - - 0.5mm -
RS-stocknr. 910-7157
FabrikantnummerT3883
FabrikantCK
€ 12,03
Each
Aantal stuks
- - Electronics Diagonal Cutters 132 mm - - - Yes - - 1.3mm - - -
RS-stocknr. 910-7175
FabrikantnummerT3888
FabrikantCK
€ 14,14
Each
Aantal stuks
- - Electronics Diagonal Cutters 135 mm - - - Yes - - 1.6mm - - -
RS-stocknr. 540-2013
FabrikantRS PRO
€ 19,45
Each
Aantal stuks
- - Electronics Diagonal Cutters 138 mm - - - Yes - 1.02mm 1.02mm - - -
RS-stocknr. 288-875
Fabrikantnummer64 52 115 RS
FabrikantKnipex
€ 44,85
Each
Aantal stuks
- - Electronics End Cutting Nipper 115 mm 10mm - - - Tool Steel 1.3mm - - - -
RS-stocknr. 847-2958
FabrikantRS PRO
€ 19,03
Each
Aantal stuks
- - Electronics Diagonal Cutters 130 mm 16mm - - Yes - 0.8mm - - - -
RS-stocknr. 763-8154
Fabrikantnummer73 02 160
FabrikantKnipex
€ 35,40
Each
Aantal stuks
- - Diagonal 160 mm - - - - Chrome Vanadium Steel 12mm - - 2.7mm -
RS-stocknr. 755-4116
Fabrikantnummer425.MT
FabrikantFacom
€ 54,13
Each
Aantal stuks
- - Electronics Diagonal Cutters 110 mm 13mm - - - - 1.3mm 0.1 → 1.3mm - - -
RS-stocknr. 158-5732
Fabrikantnummer78 13 125
FabrikantKnipex
€ 22,15
Each
Aantal stuks
- - Electronics Diagonal Cutters 125 mm - - - - - - - - - -
RS-stocknr. 847-2983
FabrikantnummerE5352
FabrikantIdealtek
€ 50,85
Each
Aantal stuks
- - Electronics Diagonal Cutters 125 mm 12.5mm - - Yes Ball Bearing Steel 1.2mm - - - -
RS-stocknr. 540-1975
FabrikantRS PRO
€ 16,13
Each
Aantal stuks
- - Electronics Diagonal Cutters 144 mm 27mm - - Yes - 1.02mm 1.02mm - - -
RS-stocknr. 297-2654
Fabrikantnummer197
FabrikantStanley
€ 122,39
Each
Aantal stuks
- - Diagonal 229 mm - - - - - 0.06in - - - -
RS-stocknr. 763-8163
Fabrikantnummer73 05 160
FabrikantKnipex
€ 41,50
Each
Aantal stuks
- - Diagonal 160 mm - - - - Chrome Vanadium Steel 12mm - - 2.7mm -
RS-stocknr. 847-8079
Fabrikantnummer8316-160 JC
FabrikantGedore
€ 30,50
Each
Aantal stuks
8316 JC - Side Cutter 160 mm 19mm - - - Steel 1.6mm - - - -
RS-stocknr. 815-6397
Fabrikantnummer77 02 120 H ESD
FabrikantKnipex
€ 109,50
Each
Aantal stuks
- - Electronics Diagonal Cutters 120 mm 14mm - - Yes Carbide 1mm - - 1mm -
RS-stocknr. 288-910
Fabrikantnummer78 91 125 RS
FabrikantKnipex
€ 24,05
Each
Aantal stuks
- - Electronics Diagonal Cutters 125 mm - - - - - - - - - -
RS-stocknr. 239-6101
Fabrikantnummer22204630
FabrikantErem by Weller
€ 67,00
Each
Aantal stuks
- - Angled Tip Cutter 4.25 in 15.01mm - - - - 0.024in - - - -
Related Products
RS Pro G12 Series insulated diagonal cutter. Ideal ...
Description:
RS Pro G12 Series insulated diagonal cutter. Ideal for working up to 1000 V ac or 1500 V dc. Suitable for cutting soft and hard wire. • Special tool steel • Chrome finish • DuoTech soft grip handles • VDE ...
The TriCut electric installation pliers, designed for 3 ...
Description:
The TriCut electric installation pliers, designed for 3 practical functions; cutting, skinning and stripping. Featuring a specially angled head to ensure that cables are stripped and skinned lengthwise along the cable. Using an ergonomic approach, which saves users from applying ...
Professional hand BiCut industrial cutters with diagonal blade. ...
Description:
Professional hand BiCut industrial cutters with diagonal blade. These clever high-performance cutting pliers give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job of two pairs of ...
VDE Insulated diagonal cutters designed for professionals working ...
Description:
VDE Insulated diagonal cutters designed for professionals working with electrical components. These professional BiCut industrial cutting pliers, give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job ...