Flat Wood Drill Bits

Flat wood drill bits (also known as wood spade bits) are used for rough boring into wood. These are flat bits, with a centring point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. How they work? The flat wood drills bits are intended for high-speed use, with an electric hand power drill. These drill bits work by either side cutting away the timber. They are capable of drilling fairly large holes and they give a flat bottomed hole.Types of Flat Wood Drill BitsFlat wood drill bits come in a range of cutting sizes and lengths. Some bits are equipped with long shanks and have a small hole drilled through the flat part, allowing them to past through timber quicker. Widths of the blade can range from 6 mm to 36 mm.

...
Lees meer Lees minder

Filters

1 - 17 van 17 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Bit Size Overall Length Material
RS-stocknr. 848-3595
FabrikantnummerP-52093
FabrikantMakita
€ 20,16
Each
Aantal stuks
12 → 32mm 150 mm -
RS-stocknr. 184-8099
FabrikantRS PRO
€ 3,94
Each
Aantal stuks
20mm 152.4 mm Chrome Vanadium Steel
RS-stocknr. 707-2759
FabrikantnummerDT4763-QZ
FabrikantDeWALT
€ 7,79
Each
Aantal stuks
12mm 152 mm Robust Steel
RS-stocknr. 788-3782
Fabrikantnummer2608597622
FabrikantBosch
€ 9,51
Each
Aantal stuks
6mm 235 mm -
RS-stocknr. 184-8128
FabrikantRS PRO
€ 6,88
Each
Aantal stuks
32mm 152.4 mm Chrome Vanadium Steel
RS-stocknr. 788-3786
Fabrikantnummer2608597641
FabrikantBosch
€ 18,93
Each
Aantal stuks
10mm 450 mm -
RS-stocknr. 707-2740
FabrikantnummerDT4762-QZ
FabrikantDeWALT
€ 6,23
Each
Aantal stuks
10mm 152 mm Robust Steel
RS-stocknr. 788-3795
Fabrikantnummer2608597642
FabrikantBosch
€ 20,31
Each
Aantal stuks
12mm 450 mm -
RS-stocknr. 707-2756
FabrikantnummerDT4768-QZ
FabrikantDeWALT
€ 6,81
Each
Aantal stuks
20mm 152 mm Robust Steel
RS-stocknr. 707-2765
FabrikantnummerDT4769-QZ
FabrikantDeWALT
€ 7,12
Each
Aantal stuks
22mm 152 mm Robust Steel
RS-stocknr. 184-8106
FabrikantRS PRO
€ 5,09
Each
Aantal stuks
25mm 152.4 mm Chrome Vanadium Steel
RS-stocknr. 184-8083
FabrikantRS PRO
€ 3,31
Each
Aantal stuks
16mm 152.4 mm Chrome Vanadium Steel
RS-stocknr. 184-8184
FabrikantRS PRO
€ 4,78
Each
Aantal stuks
22mm 152.4 mm Chrome Vanadium Steel
RS-stocknr. 788-3798
Fabrikantnummer2608597643
FabrikantBosch
€ 22,43
Each
Aantal stuks
14mm 450 mm -
RS-stocknr. 707-2762
FabrikantnummerDT4775-QZ
FabrikantDeWALT
€ 8,72
Each
Aantal stuks
32mm 152 mm Robust Steel
RS-stocknr. 707-2768
FabrikantnummerDT4771-QZ
FabrikantDeWALT
€ 7,64
Each
Aantal stuks
25mm 152 mm Robust Steel
RS-stocknr. 707-2752
FabrikantnummerDT4766-QZ
FabrikantDeWALT
€ 6,30
Each
Aantal stuks
16mm 152 mm Robust Steel
Related Products
Countersinks manufactured from premium quality high-speed steel for ...
Description:
Countersinks manufactured from premium quality high-speed steel for increased hardness/toughness, improved cutting edge strength and extended tool life. These counter sinks are designed for the production of 90° countersinks in most metals and features ground flats for positive location in ...
Hammer drill with TURBOKEIL centre point and MS5 ...
Description:
Hammer drill with TURBOKEIL centre point and MS5 spiralsChrome-nickel-molybdenum steel, shot-peened and austemperedPerfect spot-drilling and optimum drilling results, even in reinforced concreteOptimum power transmission and controlled clearing of drilling dustSuitable for all hammer drills with SDS-Plus and HILTI ...
• Hammer drill with TURBOKEIL centre point and ...
Description:
• Hammer drill with TURBOKEIL centre point and MS5 spirals• Chrome-nickel-molybdenum steel, shot-peened and austempered• Perfect spot-drilling and optimum drilling results, even in reinforced concrete• Optimum power transmission and controlled clearing of drilling dust• Suitable for all ...
• Hardened cutting edge (6tpi alternate set) welded ...
Description:
• Hardened cutting edge (6tpi alternate set) welded to a tough alloy steel body• Bonded construction reduces possibility of shattering• For use with ferrous and non ferrous metals, plastics and wood to a depth of 32 mm• 14 to 30 ...