Bearing Pullers

A bearing puller is a tool specifically designed to remove or install bearings from rotating machine shafts or from blind bearing holes. Dependant on the size of the puller, the application can vary dramatically, ranging from transmission to complicated industry machinery.

Where can a Bearing Puller be used?

One of the main uses of a bearing puller in within a car, removing a caged set of ball and tapered bearings from a rotary shaft. Different types of bearing pullers will depend on the application they are used for:

Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.

Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring operated centre point and a safety valve, minimising puller overload.

Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.

Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.

How Bearing Pullers work

Usually a hand powered tool or tool kit that features a handle on the turn screw, or a male hex end to match a drive socket. There are mechanical pullet sets, hydraulic puller sets, gear puller sets and standard bearing pullers available that mimic the same actions of the hand powered gear puller.

Features of a Puller Kit
  • Pullers are often made from tool grade steel, which means that they are harder than the materials that they are being used on. This ensures that they do not break when they are pulling bearings.
  • Reversible for internal or external uses
  • Two or three claw design
  • Spring loaded centre point

...
Lees meer Lees minder

Filters

1 - 20 van 26 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Capacity Hydraulic Force Operation Number of Pieces Case Material For Use With Jaw Reach
RS-stocknr. 732-4735
FabrikantnummerTMMK 10-35
FabrikantSKF
€ 1.034,93
Each
Aantal stuks
10 → 35 mm - Hand - - - -
RS-stocknr. 612-5688
FabrikantnummerTMMA 60
FabrikantSKF
€ 390,40
Each
Aantal stuks
36 → 150 mm - Hydraulic - - - -
RS-stocknr. 189-538
FabrikantnummerTMIP 7-28
FabrikantSKF
€ 507,53
1 Kit
Kit(s)
7 → 9 mm, 10 → 12 mm, 15 → 17 mm, 20 → 28 mm - Hand 6 - - -
RS-stocknr. 190-601
FabrikantnummerTMHC 110 E
FabrikantSKF
€ 1.033,34
1 Kit
Kit(s)
- 11.2t Hydraulic - - - -
RS-stocknr. 612-5694
FabrikantnummerTMMD100
FabrikantSKF
€ 777,83
Each
Aantal stuks
10 → 100 mm - Hand 22 - - -
RS-stocknr. 124-8442
FabrikantnummerTMBS150E
FabrikantSKF
€ 819,48
Each
Aantal stuks
- - Hand 14 - - -
RS-stocknr. 922-6226
FabrikantnummerTMMR 8F/SET
FabrikantSKF
€ 1.357,38
1 Kit
Kit(s)
- - Hand 10 - - -
RS-stocknr. 845-8353
FabrikantnummerTMMP 3X185
FabrikantSKF
€ 161,12
Each
Aantal stuks
185 mm 2.7t Hand - High Quality Carbon Steel - -
RS-stocknr. 124-8444
FabrikantnummerTMHS100
FabrikantSKF
€ 548,49
Each
Aantal stuks
- - Hydraulic - - - -
RS-stocknr. 845-8356
FabrikantnummerTMMP 2X65
FabrikantSKF
€ 62,30
Each
Aantal stuks
65 mm 0.7t Lever Press - High Quality Carbon Steel - -
RS-stocknr. 885-5322
Fabrikantnummer729101/400MPA
FabrikantSKF
€ 4.441,36
Each
Aantal stuks
200 cm³ 400MPa Hand - - - -
RS-stocknr. 124-8437
FabrikantnummerTMIP30-60
FabrikantSKF
€ 634,11
Each
Aantal stuks
30 → 60 mm - Gear 2 - - -
RS-stocknr. 845-8359
FabrikantnummerTMMP 2X170
FabrikantSKF
€ 120,31
Each
Aantal stuks
170 mm 2t Hand - High Quality Carbon Steel - -
RS-stocknr. 732-4788
FabrikantnummerTMMA 75H
FabrikantSKF
€ 720,83
Each
Aantal stuks
- 8.4t Hydraulic - - - -
RS-stocknr. 124-8454
FabrikantnummerTMMR60F
FabrikantSKF
€ 63,79
Each
Aantal stuks
68 (External) mm, 87 (Internal) mm - Hand - - - -
RS-stocknr. 124-8467
FabrikantnummerTMMR160F
FabrikantSKF
€ 147,41
Each
Aantal stuks
163 (Internal) mm, 164 (External) mm - Hand - - - -
RS-stocknr. 124-8431
FabrikantnummerTMHP10E
FabrikantSKF
€ 795,64
Each
Aantal stuks
- - Hydraulic 15 - - -
RS-stocknr. 124-8460
FabrikantnummerTMMR250F
FabrikantSKF
€ 192,96
Each
Aantal stuks
254 mm - Hand - - - -
RS-stocknr. 124-8452
FabrikantnummerTMMR200F
FabrikantSKF
€ 161,52
Each
Aantal stuks
204 mm - Hand - - - -
RS-stocknr. 124-8470
FabrikantnummerTMSC-10
FabrikantSKF
€ 136,58
Each
Aantal stuks
- - Hand - Steel - -