Solder Pastes

Solder paste is a type of solder used when manufacturing PCBs to connect surface mount components to pads on the board. The paste is a mixture of small solder spheres with flux.
The paste initially adheres components in place because of its stickiness. You then use heat to melt the paste to form a mechanical bond and an electrical connection.
Solder paste is applied to the board by stencil printing and the components are put in place by a pick and place machine or by hand.
Why use a solder paste?
Defects in circuit-board assembly are caused due to issues in the solder-paste printing process or due to defects in the solder paste. This can give short circuits, incomplete circuits, and head on pillow defects.
How to use Solder paste
• Remove oil, grease, polishing compound and any excessive oxides from the joint. Make sure that the joint is smooth, flat and free from any burs.
• Apply the solder paste to the top joint. The paste will not fill large gaps so make sure that the pieces to be soldered actually touch.
• Apply heat to the piece away from the joint, keep the heat source moving too prevent overheating the paste.
• Once the paste flows remove the heat source

Typical Applications
Solder pastes are used in mass production of PCBs and prototype PCB assembly.

...
Lees meer Lees minder

Filters

1 - 20 van 30 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Lead Free Trade Name Package Type Package Size
RS-stocknr. 184-9985
Fabrikantnummer291264
FabrikantMulticore
€ 17,03
Each
Aantal stuks
- - Syringe 25g
RS-stocknr. 226-170
Fabrikantnummer685686
FabrikantMulticore
€ 29,99
Each
Aantal stuks
Yes Loctite RP15 Syringe 25g
RS-stocknr. 835-2699
FabrikantnummerSKU-0018
FabrikantBare Conductive
€ 6,31
Each
Aantal stuks
- Electric Paint Pen 10ml
RS-stocknr. 184-9991
Fabrikantnummer291266
FabrikantMulticore
€ 29,83
Each
Aantal stuks
- - Syringe 75g
RS-stocknr. 506-4289
Fabrikantnummer653555
FabrikantMulticore
€ 56,22
Each
Aantal stuks
- - Tub 500g
RS-stocknr. 832-9775
Fabrikantnummer1817240
FabrikantHenkel
€ 72,07
Each
Aantal stuks
Yes Loctite HF212 SAC0307 AGS Jar 500g
RS-stocknr. 506-4302
Fabrikantnummer698840
FabrikantMulticore
€ 72,10
Each
Aantal stuks
Yes - Tub 500g
RS-stocknr. 555-232
FabrikantnummerGEL FLUX MOB 39 - SERINGUE DE 10CC
FabrikantMBO
€ 19,65
Each
Aantal stuks
- - Syringe 10cm³
RS-stocknr. 229-040
Fabrikantnummer685688
FabrikantMulticore
€ 38,16
Each
Aantal stuks
Yes Loctite RP15 Cartridge 75g
RS-stocknr. 832-9766
Fabrikantnummer1817229
FabrikantHenkel
€ 97,53
Each
Aantal stuks
Yes Loctite HF212 97SC AGS Jar 500g
RS-stocknr. 832-9750
Fabrikantnummer1791137
FabrikantHenkel
€ 116,21
Each
Aantal stuks
Yes Loctite HF212 97SC DAP Jar 500g
RS-stocknr. 835-2693
FabrikantnummerSKU-0216
FabrikantBare Conductive
€ 18,95
Each
Aantal stuks
- Electric Paint Jar 50ml
RS-stocknr. 226-158
Fabrikantnummer534278
FabrikantMulticore
€ 73,48
Each
Aantal stuks
Yes - Tub 500g
RS-stocknr. 146-6200
FabrikantnummerSMDLTLFP10T5
FabrikantCHIPQUIK
€ 33,04
Each
Aantal stuks
Yes - Syringe 35g
RS-stocknr. 146-6193
FabrikantnummerSMD291SNL10
FabrikantCHIPQUIK
€ 24,05
Each
Aantal stuks
Yes - Syringe 35g
RS-stocknr. 146-6197
FabrikantnummerSMD4300AX10
FabrikantCHIPQUIK
€ 22,02
Each
Aantal stuks
- - Syringe 35g
RS-stocknr. 146-6195
FabrikantnummerSMD291SNL250T3
FabrikantCHIPQUIK
€ 53,55
Each
Aantal stuks
Yes - Jar 250g
RS-stocknr. 146-6190
FabrikantnummerSMD291AX250T3
FabrikantCHIPQUIK
€ 40,70
Each
Aantal stuks
- - Jar 250g
RS-stocknr. 146-6202
FabrikantnummerSMDLTLFP50T3
FabrikantCHIPQUIK
€ 21,42
Each
Aantal stuks
Yes - Jar 50g
RS-stocknr. 146-6199
FabrikantnummerSMDLTLFP
FabrikantCHIPQUIK
€ 17,13
Each
Aantal stuks
Yes - Syringe 15g
Related Products
Tack Flux no clean in a 30cc syringe ...
Description:
Tack Flux no clean in a 30cc syringe w/plunger & tip. Low viscosity no-clean synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflow applicationsNon-corrosive, non-conductive, no-cleanTack flux will not run all over PCB when ...
Tack Flux no-clean water-washable 10cc syringe w/plunger & ...
Description:
Tack Flux no-clean water-washable 10cc syringe w/plunger & tip. Low viscosity no-clean water-washable synthetic paste flux. Has a pleasant odor. Ideal for all rework, solder, de-solder and reflowapplicationsNon-corrosive, non-conductive, no-clean, water-washableTack flux will not run all over PCB when appliedHas ...
Solder Paste no clean 63Sn/37Pb in 5cc syringe ...
Description:
Solder Paste no clean 63Sn/37Pb in 5cc syringe 15g w/plunger & tip. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesDispense gradeCompatible with enclosed print headsPasses BONO test.
Solder Paste no clean 63Sn/37Pb in 10cc syringe ...
Description:
Solder Paste no clean 63Sn/37Pb in 10cc syringe 35g w/plunger & tip. Printing speeds up to 100mm/secLong stencil lifeWide process windowClear residueLow voidingExcellent wetting compatibility on most board finishesDispense gradeCompatible with enclosed print headsPasses BONO test.