3M Aluminium Oxide Flap Wheel P120 Grit, 75mm x 45mm x 6mm

  • RS-stocknr. 162-3890
  • Fabrikantnummer 3M450 COMBI 75X45X6 P120
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: BE
Productomschrijving

3M™ 450 Combi Wheel CB-ZS, 75 mm x 45 mm, P120

Introducing the 3M™ Scotch-Brite™ 450, this combi wheel provides a versatile one wheel system that features a blend of impressive abrasives with aluminium oxide and Scotch-Brite™. The 450 flap wheels are long-lasting and precision made to provide you with overall consistency and greater control over a number of critical tasks. The wheels provide a combination of cutting action and gentle uniform finish, as well as removing scratches.

Run straight onto a right angle grinder, are a one-step system for grinding and blending. The 450 is a wheel can be used to remove scratches from stainless steel, remove defects or a fine finish on aluminium.

Features and Benefits

Combination of cutting action and gentle finishing Removes scratches
Uniform finish, without facets or edge markings.
Resists clogging

Typical Applications

These flap wheel brushes are used with power tools as it has a 6 mm shank. Suitable for light deburring, cleaning, polishing and finishing when preparing metals, woodworking, stone smoothing, and paint or rust removal.

FAQ's

How should these wheels be stored?

Flap wheels should be stored flat, avoiding damp and frost or wide temperature variations.

Specificaties
Kenmerk Waarde
Abrasive Material Aluminium Oxide
Grit Size P120
Diameter 75mm
Maximum Safe Speed 7500rpm
Series Scotch-Brite™
Model CB-ZS
30 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
20,39
(excl. BTW)
24,67
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 20,39
10 - 24
€ 19,57
25 +
€ 18,76
Related Products
Scotch-Brite™ Shaft Mounted Flap Brushes are made of ...
Description:
Scotch-Brite™ Shaft Mounted Flap Brushes are made of flaps of non-woven material mounted on a spindle. Use Scotch-Brite™ Shaft Mounted Flap Brush to give a fine uniform finish to a variety of metal work pieces, without leaving chatter marks. The ...
Flap wheel grinders ideally suited for stock removal, ...
Description:
Flap wheel grinders ideally suited for stock removal, deburring, cleaning, blending and finishing on a wide range of materials. Aluminium OxideIntegral 6mm diameter shaft.
Scotch-Brite™ Radial Bristle Brush uses our own blend ...
Description:
Scotch-Brite™ Radial Bristle Brush uses our own blend of 3M™ Ceramic Abrasive Grain, with aluminium oxide and moulded, flexible but firm bristles which give more surface contact than wire brushes.Use Scotch-Brite™ Radial Bristle Brush to remove paint, stains, adhesives, weld ...
Scotch-Brite™ Radial Bristle Brush uses our own blend ...
Description:
Scotch-Brite™ Radial Bristle Brush uses our own blend of 3M™ Ceramic Abrasive Grain, with aluminium oxide and moulded, flexible but firm bristles which give more surface contact than wire brushes. Use Scotch-Brite™ Radial Bristle Brush to remove paint, stains, adhesives, ...